Why not use GRX di2 2by 48/31 chainrings? Should be able to fit with 45mm tyres. You will have better Q factor, better chainline, higher top gear, better drivetrain efficiency, no?
@ronald kuba I am looking to get a Garmin integrated Garmin mount for your more integrated stem. Any idea if you get one somewhere? I contacted 3T but they don´t have something jet. I was hoping to get a 3d print file so I could get it printed in Aluminum or Titanium.
I think k-edge has something working with 3t More. Now 3T is giving k-edge mount together with frameset. I saw on youtube that someone was using bar fly prime direct 1 with this stem.
It looks like you don't have a direct mount hanger. Do you have one coming in? I really wish there were direct mount hangers for my OG Explloro and 1st generation Strada, but 3T loves Sram sothey don't seem to bother. And now I guess UDH will take care of it for them in the future.
I purchased your Ostro gravel frame . In order to fit a 48t oval I had to remove the adjustment spacer from the non-drive side to shift the cranks outboard more . It’s tight but it works . Nice hack with adding a longer spindle on the pedal !
Ronnie I had the same rattling problem with my Dura Ace 9270 shifters. A little bit of tacky grease behind the lever fixed the problem and all has been good for 25,000k now.
Ronald, I have been a long time subscriber and I appreciate your content especially when it comes to your quest of perfecting your bike fit. In your experience, have you been able to find a 140 mm in a -17 degree stem that also allows for full internal cable integration? Thank you in advance.
@@ronykuba easily adjusted in post, but ok. studio lighting? or industrial floodlights for a construction site? you look like you're about to burst into flames my man
I’m surprised you have 700x45 tyres on there. I thought the 700x38 on my RaceMax Italia was tight.
The official clearance is also 45mm
@@ronykuba Nice, I’m gonna try. Thanks Rony for sharing this build 👍🏽
Depends which Italia you have. They did increase clearance at some point.
@@gravelcyclingcanada yup, mine’s the 418
Why not use GRX di2 2by 48/31 chainrings? Should be able to fit with 45mm tyres. You will have better Q factor, better chainline, higher top gear, better drivetrain efficiency, no?
Unfortunately that’s still over the clearance limit of the frame.
@ronald kuba I am looking to get a Garmin integrated Garmin mount for your more integrated stem. Any idea if you get one somewhere? I contacted 3T but they don´t have something jet. I was hoping to get a 3d print file so I could get it printed in Aluminum or Titanium.
There is one for the Apto, but not for the More as far as I know
I think k-edge has something working with 3t More. Now 3T is giving k-edge mount together with frameset. I saw on youtube that someone was using bar fly prime direct 1 with this stem.
nice build Ronald, what's the finish weight of the bike?
Thanks, it’s around 9kg
Another straight to the point review
My style 😎
It looks like you don't have a direct mount hanger. Do you have one coming in? I really wish there were direct mount hangers for my OG Explloro and 1st generation Strada, but 3T loves Sram sothey don't seem to bother. And now I guess UDH will take care of it for them in the future.
I couldn’t find any unfortunately
I purchased your Ostro gravel frame . In order to fit a 48t oval I had to remove the adjustment spacer from the non-drive side to shift the cranks outboard more . It’s tight but it works . Nice hack with adding a longer spindle on the pedal !
Glad you like it 👍
I also have factor ostro 52 and I could fit 48 sram aero chainring wothoit any adjustments😊
@@luzikedy1 an oval 48 likely has the largest diameter of a 52.
Ronnie I had the same rattling problem with my Dura Ace 9270 shifters. A little bit of tacky grease behind the lever fixed the problem and all has been good for 25,000k now.
Thanks, I will try that
Ronald, I have been a long time subscriber and I appreciate your content especially when it comes to your quest of perfecting your bike fit. In your experience, have you been able to find a 140 mm in a -17 degree stem that also allows for full internal cable integration? Thank you in advance.
Thanks for the support! To be honest, not really. There aren’t so many available with one piece cockpits being common these days.
@@ronykubathank you so much for this response! I wish I could find an integrated cockpit more aggressive than -10 degrees.
Very nice color
Thank you! Cheers!
Upper buttons are on weridly placed,at least on 11s version
@@mikicastan they’re pretty good here
holy filter batman
?
Gotta chill a bit on the instagram filters bro
@@DDai-qd8uk there are no Instagram filters on TH-cam. We use studio lighting.
@@ronykuba easily adjusted in post, but ok.
studio lighting? or industrial floodlights for a construction site? you look like you're about to burst into flames my man
@@DDai-qd8uk ok