This is an outstanding video! The details, both written and visual, are the best and necessary for a visual learning as I am. I'm thrilled with the multiple viewpoints, which eliminate any guesswork on how the finished product should look if I can't see all angles beforehand. No guesswork. Not only is your design incredible but your presentation can't be beat. Thanks!
Waooooo excelentes vídeos más fáciles imposible que genios muchas gracias me gusta la carpintería pero me cuesta bueno ya no porque ustedes con estos vídeos bueno bendiciones
Saludos a la gente de Inventorino Forniture y mis felicitaciones por esas ideas tan funcionales, prácticas y fáciles de entender. Despiertan la imaginación. Gracias por esos videos.! 😉👍
If you expanded the dimensions of your 1st board to allow two piece to be cut out of it you would reduce waste and cost. Also if the branch is the same width as the main length it would be easy to create a jig for drilling if you have access to a drill press. Adding in thin washers between your pieces would also reduce drag when it is moving and keep it from scratching up any finishes.
Great work! Just a couple of questions: wouldn't it be better to use ball bearings for the joints instead of wood pins? They may be more expensive at the beginning but it seems to me the wood pins will get loose with time and that would be a pity. I would also drill a hole on the external of the central shelf to install a locking pin, so that when opened it would not be possible to fold it again by mistake. Do you think it could be possible? Anyway, I find this project outstanding! Thanks for sharing!
Genial, había visto este mueble, pero anclado a una pared, es el mismo sistema, pero no sabía cómo hacerlo. Tal vez en vez de usar tarugos y tornillos para las partes móviles sería más simple poner unos pernos con golillas a ambos lados + la tuerca para fijarlos.
I think this is the best Pets Care Shelf Maybe? If Somehow Have Like a Fencing or A Cover Like Food Type Protection Material that is Like a Bread Container Maybe, Curve Half Cylinder and A Part to Look To Be Normal Transparent Glass/Plastic. If have Wheels At The Legs Easy to Push. Somehow the Fencing to be Flippable By Hinge so When Taking if Still Standing, No Accident(Hitting Fence When Pulling).
Nice design. I was worried about the armature strength at the inside elbow at first. I see now that this isn't as big of a concern(other than the lowest shelf(due to the weight transfer. I might still soften the inside of the elbow
Hi! I do have this shelf cum table that comes with iron frame and wood shelves, so, I'm guessing is they can make it with iron, steel should be possible.
Not sure what 2 cm equals in American but I'm guessing 3/4 ply would be fine. Also substitute a jig saw for reciprocating saw and circular saw for grinder. Otherwise pretty good video explaining the steps.
El video empieza con una musica muy suave y agradable y luego se escuchan los ruidos de todas las Herramientas, jajaja, se que es algo personal pero estaba con los auriculares y no me resultó agradable. De todos modos es muy original el mueble!!! 😘
Muito obrigado por ter tanta pasiensia com seu pubrico sua demostrasao ficou muito linda e esclaresedora ate um buro entende paso a paso como voce nos ensinou gratidao por nos ajuda seu pubrico volta redonda rj
Thanks!
thanks to
Спасибо большое , за очень наглядное и подробное видео. Очень полезный материал для новичков и профессионалов. Вам удачи в дальнейшей работе.
Это гениально! Это лучшее видео, что я видела. Спасибо! 🌷
Muchisimas gracias por compartir este proyecto sin egoismo 🙏
Ralmente útil y genial. 👌👏👐🇨🇴
magaling idol.. Marami akung matutuhan sa vedio nyo.. God blessed..
Great Job & Video
Muito bacana ficou excelente seu projeto MESA/ARMÁRIO foi uma ótima apresentação e muito boa à demonstração valeu obrigadao muito útil valeu 🎉🎉🎉
This is an outstanding video! The details, both written and visual, are the best and necessary for a visual learning as I am. I'm thrilled with the multiple viewpoints, which eliminate any guesswork on how the finished product should look if I can't see all angles beforehand. No guesswork. Not only is your design incredible but your presentation can't be beat. Thanks!
Perfect ❤
Super high quality tutorial! Amazing!
Great idea
Keren bang otw bikin😁
Thank you very much for providing the video!
Very good soft ware.
Super demonstration video. Thanks.
What do you do with the stuff on the shelves when you turn it into a table? Ir is that where you put your dishes and silverware?
YES, SIR.
NO NEED TO MOVE THE TABLEWARE
I am in love with this channel!!!
Fantastic presentation
Super job
Tq very much
Спасибо за такой подробный ролик 👍
Thanks for your good videos
Well Done video!!
卧槽，好厉害！👍👍👍
Waooooo excelentes vídeos más fáciles imposible que genios muchas gracias me gusta la carpintería pero me cuesta bueno ya no porque ustedes con estos vídeos bueno bendiciones
Thank you.😀😀😀 Alf
훌륭한 재능입니다. 작품이 멋집니다. 저도 한번 만들어보고싶어요. 좋은영상을 보면서 배우고 싶어서 구독 알람설정했습니다
Sangat cocok untuk ditiru
Спасибо , за точные размеры и фантазию !
Excelente idea, very good.
Very good project
Helal sana eyvallah eline emeğine sağlık
Wow It’s so clearly to me Thanks you👏👏👏
Excellent regardez cette vidéo du Maroc le matin avec 09h merci beaucoup..bon courage
Di negara tempat tinggal saya sekarang jam 5 sore.
Dans le pays où j'habite il est maintenant 17h
Sublime vídeo y tutorial!!! MIL GRACIAS!!!!!!
Chan mast
Great, One of the best detailed video i ever saw.
Saludos a la gente de Inventorino Forniture y mis felicitaciones por esas ideas tan funcionales, prácticas y fáciles de entender. Despiertan la imaginación. Gracias por esos videos.! 😉👍
Amazing channel. Thanks for the videos.
Tq bos for share u design and skill working god bless u
If you expanded the dimensions of your 1st board to allow two piece to be cut out of it you would reduce waste and cost. Also if the branch is the same width as the main length it would be easy to create a jig for drilling if you have access to a drill press. Adding in thin washers between your pieces would also reduce drag when it is moving and keep it from scratching up any finishes.
To make two L shape bracket at 1 board
¹
I'm copy and pasting this into my notes for later when I build it. Thank you.
Super, thank you for your video
Gracias por tomarse el tiempo de producir el video compartir con nosotros mil gracias
Raúl desde Bolivia
Super vidéo, merci. Quel type de vérin as-tu utilisé ?
Great work! Just a couple of questions: wouldn't it be better to use ball bearings for the joints instead of wood pins? They may be more expensive at the beginning but it seems to me the wood pins will get loose with time and that would be a pity. I would also drill a hole on the external of the central shelf to install a locking pin, so that when opened it would not be possible to fold it again by mistake. Do you think it could be possible? Anyway, I find this project outstanding! Thanks for sharing!
Thank You
Excellent! I think that's a great idea. good luck!
Hola Master.
Gracias por los detalles del vídeo y sus medidas claro..slds desde chile
excellent work
Keep up the good work
Thankyou for the information
Beautifully done . I will have to convert from metric , but small effort for me compared to the work you’ve done. Thank you
The whole world wont have to convert from non-metric!
👍👍👍👌
Thanku for being so thoughtful
Well done man👍
C'est cool vos invention trop chic félicitations
ok. saludos inventorindo furniture. gracias por contestar.
God idea so try to do more exllent furniture man
good sir, the spirit for his work...hope it will be more successful
EXCELENTE
It's not available in my country and thanks to you my neighbour will make it for me. Thank you so much!
Nice vdo
Amigo excelente video, gracias por compartir las medidas
This is just amazing brother keep up the good work and god bless you man
Ї😅😅😅
most perfect
Que excelente creación y muy práctica, felicitaciones
Genial, había visto este mueble, pero anclado a una pared, es el mismo sistema, pero no sabía cómo hacerlo. Tal vez en vez de usar tarugos y tornillos para las partes móviles sería más simple poner unos pernos con golillas a ambos lados + la tuerca para fijarlos.
A nice optional choice for model railroaders who want to make a big layout and save space.
Saya orang indonesia 🙂 ,Salam 🙏
good ideal
Excellent work
I think this is the best Pets Care Shelf Maybe? If Somehow Have Like a Fencing or A Cover Like Food Type Protection Material that is Like a Bread Container Maybe, Curve Half Cylinder and A Part to Look To Be Normal Transparent Glass/Plastic. If have Wheels At The Legs Easy to Push. Somehow the Fencing to be Flippable By Hinge so When Taking if Still Standing, No Accident(Hitting Fence When Pulling).
روعة الله يحفضك
감사합니다
High creativity!! May you tell me the software being used!
Sketchup
Nice design. I was worried about the armature strength at the inside elbow at first. I see now that this isn't as big of a concern(other than the lowest shelf(due to the weight transfer. I might still soften the inside of the elbow
Wow.
🤗🙌🏻🙌🏻👍🏻
What a fantastic job, Sir. Congrats !!!
Buen video amigo. Saludos
I luv your videos!! Can you please do one for the 5 in 1 stool
This is amazing I am a welder in south Africa is it possible for you to do the same thing using steel combined with wood if so please share thank you
Hi! I do have this shelf cum table that comes with iron frame and wood shelves, so, I'm guessing is they can make it with iron, steel should be possible.
That would be awesome thank you for the information
@@cabanganismolltshuma6489 you're welcome! If you need any more info regarding the same, feel free to ask 👍
I am thinking about doing a 3 shelf one wider deeper shelves
This is brilliant. Any chance you have a version that can be mounted to a wall instead? Either way I will give this a try. Thanks!
not yet available for that model
@@inventorindofurniture thank you.
GOOD stuff, where do you get all your ideas ?
I was inspired by various sources on the internet
Nice thing. Which app for create this video please ?
SketchUp
Not sure what 2 cm equals in American but I'm guessing 3/4 ply would be fine. Also substitute a jig saw for reciprocating saw and circular saw for grinder. Otherwise pretty good video explaining the steps.
Yes, right:
2 cm = 3/4 inch
Matthew Peech built one almost the same
Столик интересный, но как им пользоваться в горизонтальном положении? Вот бы еще сам чертеж выложили , да ещё в формате dxf ...
Вы можете использовать дверной замок внизу. чтобы стол не складывался.
Я забыл включить видео.
gracias por la exactitud en los planos
😍👌🏼🙏🏼
Obrigado por atender meu pedido show
What is the software you used to make these simulations?
Sketchup
Luar biasa
Hola buen trabajo con que programa diseño o utilisa para sus videos por favor
SketchUp software
Good morning
Congratulations for the excellent video.
I would like to know what program you use to draw in 3D and for animations.
Thank you
SketchUp and Lumion Software
Buen trabajo
El video empieza con una musica muy suave y agradable y luego se escuchan los ruidos de todas las Herramientas, jajaja, se que es algo personal pero estaba con los auriculares y no me resultó agradable. De todos modos es muy original el mueble!!! 😘
Hey, please make for wall mounted ones
ok sir, please wait...
@@inventorindofurniture oke, i look forward it.. I've subcribed your channel.. best explanation for making furniture😁
@@inventorindofurniture please make it ASAP 🥲
Muito obrigado por ter tanta pasiensia com seu pubrico sua demostrasao ficou muito linda e esclaresedora ate um buro entende paso a paso como voce nos ensinou gratidao por nos ajuda seu pubrico volta redonda rj
Спасибо
Hi can you tack tabol banch wood warking
Nice project. May I know what program you are designing and what you are working on in the videos
Sketchup Software
Do you have the printable plans anywhere?? I would love to give this a try
measurements 9:02 to finish
en cuanto se puede vender una mesa asi ?? digo... no soy carpintero pero trabajo bien en madera... y estoy sin trabajo xDD hacer esto es Rentable ??
tal vez tu puedas