It may be something relate with the charge roller. probably it's out of position. the long shaft side goes near the gear side. also check the ground contact inside the drum
I can't help you without seeing the cartridge. but it must be something simple: a missing contact somewhere, probably between the charge roller and the cartridge. or inside the drum there is a copper contact, may be it's missed.
bro...thanks for your rply .but it s not working. the problem is remaining same.(after adjusting the charge roller). paper is still come out dark black.. is their any other solution.???? suggest me..bro
How/where to get/buy new chip? OR I have two samsung ml 3310 empty cartridge ,but I have tried to fill ink in one,if the chip is difective then can I use second cartridge's chip in that cartridge to test it? or not? Please reply
i have refill toner in samsung mlt- 205s cartridge fully and. changed the chip. it showing 100% but it prints faded. some alphabets are deep and some are very light. with same regular pattern in printing. Why ? whats the problem. plz suggest me.
+Prasanta PATRA may be a low quality toner powder, the drum, or a developer roller not cleaned. the regular pattern it depend on which distance they are.
bro...thanks for your rply .but it s not working. the problem is remaining same.(after adjusting the charge roller). paper is still come out dark black.. is their any other solution.???? suggest me..bro
It may be something relate with the charge roller. probably it's out of position. the long shaft side goes near the gear side. also check the ground contact inside the drum
На @бокавых крышках@ есть флажки @рычаг разделения фотовала@ как их правильно выставлять? Вперёд, назад или вниз? На что они влияют?
Brother thanks for reply I have replaced the same chip as shown in that video
you can see the correct charge roller position at 7.45 minute in this video. verify the supports of the charge roller. hope it can helps you
I can't help you without seeing the cartridge. but it must be something simple: a missing contact somewhere, probably between the charge roller and the cartridge. or inside the drum there is a copper contact, may be it's missed.
The cartridge of the samsung ml 3750 -an electronic chip that install in the cartridge -I need to learned to reinstall the electronic chip(software)
Toners D205E are the same as the Xerox 3325/3315 toners? Only different are chips? Thanks you very much
yes, they are the same
Thanks for putting the video I did not find any in Portuguese.
after refill is it require to change the chip of cartridge
+Prasanta PATRA yes, you have to change the chip
bro...thanks for your rply .but it s not working. the problem is remaining same.(after adjusting the charge roller). paper is still come out dark black.. is their any other solution.???? suggest me..bro
The subject is very good -how to reinstall software the chip
How/where to get/buy new chip? OR I have two samsung ml 3310 empty cartridge ,but I have tried to fill ink in one,if the chip is difective then can I use second cartridge's chip in that cartridge to test it? or not? Please reply
no, if the chip has reach the end of its life you can't use it.
Thanks for the video...
which cartridge is common and best of samsung printer as like 12A of HP
+Prasanta PATRA you can try Samsung ML1660 type
Excelente
thank you
thanks
nice
the cylinder drum D205 D203 equals ..... drum can use the D205 in the D203 ....
denilson arruda yes, you can use it. verify the gears are identical, with the same number of tooth.
i have problem when i give the print after refilling the 3710nd cartridge. the paper is come out totally black. plz give me the solution.
i have refill toner in samsung mlt- 205s cartridge fully and. changed the chip. it showing 100% but it prints faded. some alphabets are deep and some are very light. with same regular pattern in printing. Why ? whats the problem. plz suggest me.
+Prasanta PATRA may be a low quality toner powder, the drum, or a developer roller not cleaned. the regular pattern it depend on which distance they are.
its right...
good
can u saw this solution by video...plz....i must need help...urgent..
i dont have that chip is there any other method to start printer again it creating problem ....... it shows end of life of cartdrige please help...
No, there are no other reset methods. you have to change the chip
Sir when I refilled tonner it's making noisy and print quality very poor
It's difficult to say without checking the cartridge. Try to dismantle and riassemble the cartridge again, check the toner roller contacts
Thank you sir
Sir any what's app number
i filled ink as shown in that video but after insert it in printer it shows it empty
have you changed the chip?
The caps do not fit perfectly
The side caps of the toner cartridge?
I have a printer samsung ML3310
I think the chip is defective. the only way to cancel the empty cartridge error message is to install a new chip
bro...thanks for your rply .but it s not working. the problem is remaining same.(after adjusting the charge roller). paper is still come out dark black.. is their any other solution.???? suggest me..bro
thanks
can u saw this solution by video...plz....i must need help...urgent..