How To Program Toyota Chip Key: Camry Sienna Corolla Highlander 4Runner Solara Matrix FJ Cruiser tC
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2024
- You can find replacement blank Toyota transponder chip key here: www.amazon.com/gp/search/ref=...
(this is Amazon affiliate link).
Visit my website for the most up to date compatibility list and transponder chip key programming instructions: www.diy-time.com/automotive/to...
If this method didn't work, try this instead: • How to program any Toy...
How To Program Toyota Transponder Chip Key.
This technique will work for the following models:
(*This reference might be incorrect, or not complete. Be sure to check compatibility with the seller when buying a new key)
Sienna (2004-2010)
4Runner (2003-2009)
Camry (2004-2006)
Solara (2004-2008)
Highlander (2004-2010)
Matrix (2005)
Corolla (2005)
tC (2005-2010)
FJ Cruiser (2008-2009, 2013)
Raw4 (2003-2009)
Yaris (2007-2008)
Hilux (2010)
HiAce (2010)
***Sequoia (2003-2007) - see special instructions on my website here:
www.diy-time.com/automotive/to...
Legal Disclosure
Videos provided on this channel are intended for informational purposes only and cannot be held liable for any injury, damage, or problems that arise when trying to duplicate steps shown in these videos. This information is provided “as is” without any representations or warranties and should not be treated as advise. This information is not guaranteed to be accurate. Do it at your own risk. This channel is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. - แนวปฏิบัติและการใช้ชีวิต
You can find blank Toyota transponder chip key here: amzn.to/3e3fbCM
(this is an Amazon affiliate link)
Outstanding job! It took me 4 attempts but I finally got it into program mode. I have a 2008 Toyota 4runner.
This did work on my 2006 Sienna, but it took several tries to get the programming mode on. I think it worked finally because, as shown in this video, I only opened the door enough to let the door ding only once each time I opened it. And I opened and closed it fairly quickly, as shown in this video. Bravo! Great instructions!! Many thanks!!
Well it won't work for us on our 2009 RAV4.
Me neither in my 2010 Corolla.
To get into programming mode you must do the first two steps in 35 seconds. Then take the key out within 10 before sticking in new key and waiting for light out.
I tried a couple of other procedures that did not work on my 2004 Highlander. This procedure worked like a charm.
Thanks! This worked like a charm on my 2006 Toyota Highlander Hybrid - I bought a transponder key online for $6, took it to my local Walmart, and they cut the new key for free! Total WIN!!!
I wasn't aware that Walmart had the VIN codes for the keys ! That sounds scary !
It worked!!! Thank you DIY for providing valuable tip, priceless!!
Worked perfectly the first time on my 2005 Toyota Matrix! $12 bucks total for new key off Amazon and local hardware store to cut the key. I would definitely try this first before spending $80 at the dealer! Thanks, DIY-time!
Awesome!
Thanks so much for this video! Worked on a key I had cut for my 2005 Toyota 4Runner. Very clear instructions and worked on the first try. Saved myself $125 they charge at the dealership! Thanks again!
Works on 2010 Sienna. Thank you.
I really appreciate your insight. Looks like I'll be driving again soon. Thank you very much.
worked perfect on my 2004 camry le, thanks a million.....from cincinnati
Awesome!
Thanks!
Thank you! I bought an after-market key on eBay but the instructions were as clear as muddy water. My car is a Toyota Corolla Ascent sedan 2007 ZRE-152 (Australia). I didn't find your website describing the procedure. Your warning not to cut the key first is important but in my case, I cut it first - I was able to succeed with your procedure luckily. Your second good point is how to identify the master key and use it for programming. Your best point was how to know that you have brought the car into key programming mode - the security light staying on once the master key was withdrawn. I'm so grateful to have found your crystal clear procedure - I spend a day opening and closing my door trying the eBay procedure and others I found online. Luckily I found your excellent method - worked the first time! I'm impressed 🙂
Worked first try on two new keys for 2008 4Runner, thank you!
2005 Matrix , $16 blank on EBay , $4 to cut key , Programming key for free with these instructions . Success . Instructions worked great . Lock smiths want $65-75 for this same job . Thanks for a clear instructional video .
Great! Thank you for sharing!
James Thompson work whit scion
o5... I'll try again!!! i couldn't do the key........... matrix. I did the remotes!!!
You sir are brilliant! I mean it. You just saved me 600 dollars for one spare key to my vehicle. Thank you.
That’s awesome! Thank you!
And I thought the 100 bucks they wanted for mine was high.
Worked great in a 2007 Highlander, thanks for the clear instructions. Locksmith didn't believe me when he cut the blank that it was possible to program the key transponder without a specific programming device
Ha ha.. 😂 I just had the same experience.. Key lock place said they would have to program each key for $45.. I told them that I could do it myself.. they didn't believe me and wished me luck.. and said, "Come back when it doesn't work "
Fantastic and thanks do much for this! My locksmith wanted to charge be $120 AUD to supply and program a key. Thanks to you I will have money left over for Xmas presents this year.
For my 2004 sequoia this definitely worked
..
Update. I tried one more time and it worked using the sequence below. This time, when turning the programmed key back and forth to off and on, I did it really fast. I also inserted the new key really fast. I think that’s what did the trick. You have to do it really fast with Sequoia. That’s what my locksmith told me. He was right.
1) Close all doors
2) Insert your Master key (black) int the key cylinder
3) Turn the ignition from Lock to On 5 times within 15 seconds - on the 5th time, leave the key in the ON position
4) Open and close the driver’s door 6 times within 20 seconds
5) Turn the Master key back to Lock and remove
6) Insert the new blank key and turn to ON position
7) Leave in ON position for at least 60 seconds (while the key registers with the vehicle)
8) After 60+ seconds, remove the key.
9) Open then Close the driver’s door to end the process”
Awesome, thank you for sharing you findings here! 👍🏻
Thank you, this worked on my '04 Sequoia
THANKS men, you are awesome, worcks great in my 03 sequoia
worked for my 2004 4 runner SR5, saved me $200 thanks.
This worked on my 2008 Scion TC. Thanks for saving me $60!
Great! i'll add it to the list in description.
Thank you for coming back and sharing it!
To get into programming mode you must do the first two steps in 35 seconds. Then take the key out within 10 before sticking in new key and waiting for light out.
Video workes perfectly, watched all other videos and tried other instructions buy they all say to turn thr new key to on position, that doesnt work for sienna 09
I used your procedure successfully on a 2005 Sienna XLE Limited. I got the key blank on Amazon from Keys2go for 7.99 plus tax. It had the dot on the key stem. Home Depot cut the key for free. They used a big Hillman automated key making machine. They must have their own key blank to provide a bar code to program the key making machine. There are procedures on TH-cam to program the key fob as well. Thanks for providing an excellent video! I have only used this key twice so I can’t comment on its longevity.
Awesome, thank you for coming back to share your success story!
Worked perfectly on 2004 Toyota Camry SE V6. Saved me a bundle. Dealership wanted $130 just to program! Thanks a lot.
Awesome, Im glad it worked out well for you!
i need your help for Toyota FJ CRUISER 2010 Keyless Entry Remote Replacement programming
didn't work for me either.
HI, do you know if this method works for a G chip of a 2010 Toyota Hilux?
Sorry, I don't know. We don't have Toyota Hilux here in US.
My 2005 Toyota Corolla(without automatic locks) key is bending really bad so I bought 2 keys with chips in the online for $14 and I got them cut at farm and fleet for free and I followed these steps and it worked perfectly. I just saved like $90 per key. Dealerships charge so much for replacements. Thank you for this video!
Awesome, I’m glad it worked out so well for you!
Thank you this really worked i just programed a 2005 toyota corolla xrs and the key.is now fully programed and works beautifully thank you
Awesome!
Hi!
I have a problem with my 2005 camry. When I push the unlock key it unlock the door, get 2 beeps and a flashing light. But, when I push the lock button I don't get anything except the doors get locked , no beep no flashing light and the headlight don't go off even after I hit it twice. Can someone help me fix this issue i'd appreciate it.
I tried this and everything worked as described until I puI t the new key in. The light is blinking much faster than your light. Advice?
Make sure you are using master key to enter programming mode.
Make sure you have correct chip as well (same as on your master key).
Or your new key may be defective.
@@DIYtimeTRD or you car has reached the maximum amount of keys to program and you have to have to hack into the cars ECU to remove lost programmed keys
@@DIYtimeTRD please show same videos for Hyundai i20.
I dont have that car available to me...
Worked perfectly for 2 keys for my F.J. Cruiser, you are awesome.
Thank you! 😁
Worked fine on my '05 4Runner!
Did not work for my 2007!Toyota Camry any advice?
TFin even mine not working 2017 Toyota Camry solara. Any update?
Nice video does anyone know if this works on the 2007 corolla the key I have looks the same. Thank you
No, it won't work on 2007 model.
www.diy-time.com/automotive/toyota/toyota-transponder-chip-key-programming/
what about a 2006 model. its also a corolla
MartiSide did it work I bought the key but haven’t got it cut or tried yet
Worked on a Toyota Yaris 2008! Great video mate! Thanks
Thank you for this! It worked perfectly on my 2004 Lexus. Saved me so much money.
Does NOT work for 2007 Corolla or 2007 Camry
For the 2007 Toyota Camry, I was told, leave the key inserted on the 6th time and open and shut the door 6 times. 👀
2006 Toyota Highlander Limited 2 wheel drive- worked perfectly! Fantastic tutorial!
Thanks!
Joe
Thank you so much, this video saved me $240 , I bought a key from Toyota blank one $32, which they were going to charge me $299 to cut and programme it. but I got it cut for $15 and programmed it myself. Total cost was $47. Make sure you follow the steps, also go on their website read the steps before you do it, test out if you can start the programming mode with your key first before you go to buy the key. it worked for my 2005 toyota Kluger Japanese import. (YOU HAVE TO HAVE THE WORKING KEY TO MAKE THIS WORK.)
Awesome, thank you for sharing!
Just did this on my 2007 4Runner SR5..... worked perfectly first time ! Paid $7.95 for the transponder blank on Amazon, $2 to have the key cut.
Sounds like a good deal!
Thanks man, worked on my 2009 4Runner the first time I tried. Saved quite a bit of dough.
Awesome!
Worked great on my 2005 Toyota Sienna! Thanks a ton!
My pleasure!
2005 Toyota Matrix. Worked!!!!! Thank you. Ordered blank oem key online for 12$ for two keys took it to homedepot they cut it for free because they told me they couldn't program it unless I bought their 80$ key.
+dave s
Awesome! Once I also got my 4Runner keys cut for free at my local hardware store. Because I brought my own keys, they didn't charge me anything.
2007 Sienna : worked like a charm! Thank you!
This procedure works on Toyota Camry 2006 LE 4 Cylinder.
It did not work for me after three tries, because I opened and closed the door too slow. I read one of the previous comments about open and close the car door just like on this video, and tried again, it works. You need to open and close the driver door a little fast, just like the video.
Thanks for the tip!
Thanks!!!! Your video was the only one that worked for me!
DIY just saved me $130 from going to the stealership. Works awesome. just did my 2008 Toyota 4runner. thanks sir !
+cpdoh
Great, I'm glad to hear that!
Worked on my 2006 4runner... Thank you!!!
It worked on 2008 FJ Cruiser. Thank you for your video!
2003 4runner limited V6. Key from dealer = $28 (including cutting the key from VIN). Programming instructions worked perfectly.
Nice!
Worked on my 2002 landcruiser 100 series ! Thanks heaps :)
Nice!
It works with my 2008 Sienna. Awesome tutorial!
Thank you!
Worked the first try on my 2007 4Runner!
Worked on my 06 4 Runner, thanks for sharing!
Awesome!
I have a 2007 Camry Solara. I tried 4 different posts on how to program, but none worked!. yours did. I can not thank you enough
I have the same car it didn't work, how did you do it
unbelievable it worked! thanks. 2009 4runner. now the remote, I dont see your video for that. thanks again.
+kahanaohana
Sorry, our 4Runner was totaled in car accident, so I never recorded that video. But I should still have programming instructions somewhere. I'll send it to you soon.
+kahanaohana
Here you go. Doesn't look like it is compatible with 2009 4Runner, but try it anyway. Don't buy a remote yet, just check if you can enter programming mode first.
www.diy-time.com/automotive/toyota/toyota-remote-fob-programming-instructions/
I hope this works.
thx, will check
hy, how to set the alarm sensitivity on hilux vigo champ? 2014
Thank you so much! It worked on my 2007 4runner limited!
+Matt I
Great!
This worked for my Toyota 2010 HILUX, Spent only $4 for key and chip, Socksmiths asked over $100. Thank you
Thank you for sharing!
I'll add it to compatibility list on my web site, this definitely will be helpful for others!
www.diy-time.com/automotive/toyota/toyota-transponder-chip-key-programming/
Hey I was in your website and used method #2 and it worked on my 03 Sequoia. I left the key on for 1:05(so more than 60 secs).
Great, glad it worked!
It worked the first time on my 2008 Toyota 4runner. Thank you!
works on a corolla xrs 2005! thank you! 45 $ for the oem key and cut!
Thanks! Worked the first time on my 2004 4Runner
Awesome!
worked perfect, had to do it twice and wait a little more than a minute, but still it worked. thanks
DIY-time hi, I intend to buy a Toyota Vitz 2013 which has only one key...will the steps you showed work for my Toyota Vitz F , 1000 cc, right hand drive?
Most likely not.
DIY-time any idea how to do duplicate key for my Vitz pal?
Sorry, no idea. We don't have this model here in US.
Worked on 2006 convertable solara. Took longer then a minute but it worked.
Worked great for my 2004 Sienna LE. Excellent clear instructions especially from a Russian guy (no offense) ;)
Now I will buy more keys from your link as a token of my appreciation.
😁 Awesome, thanks!
Yay, 2005 corolla works great. Took two tries because the first time I waited a bit too long to insert the new key. Be sure to get the new key in while the security light is still lit solid.
I can't even get the security light to light solid.
@@njsongwritersame on my highlander 2007😢
Thank you, This was a big help ! I have a 03 4Runner v8 4.7 chip is bottom right side OEM key at toyota is $ 37.00 programming is $ 170.00 I'll just have the key cut and do the rest my self ! Thanks
Awesome!
Does the 2004 Toyota Sienna LE have the programing feature? I've tried the sequence several times and haven't been able to get the security light to stay on after opening and closing the door 6 times. I pull the master key out and the security light just goes out and doesn't stay on. My master key has a dot as does the uncut, unprogramed transponder key.
Alhamdulillah! About the 10th time I tried it it worked! 💕💕💕 This single mom thanks you a million. Never use paracord as a key chain! Mine got wrapped around my steering column and bent my key this morning almost in a 90° angle. Yikes!!! Needless to say my original intention was to go on Amazon months ago and get spare keys and program them myself. But because of the possible emergency situation not wanting my key to break off in my ignition. I went to the dealership today verified my ownership them, bought the key only and have them cut it by the VIN number (because that bent key definitely was not fitting into a tracer key machine to copy it) and told him I'd be back if I couldn't program it myself. Getting the key today costing me $45 but I saved $155 "programming fee" plus most importantly I saved hours of time wasted on a Saturday day off not having to wait, in a dealership . Now I will be getting the rest of my spare keys on Amazon as well as getting the key fob which itself at the dealership cost over $130 plus the programming fee. Again a million thanks.
Awesome, now make the second spare key and remote for the situations like this!
Thanks... worked great on 2007 4runner
Great!
Worked on 2004 Highlander after getting into programming mode in 30 seconds. Thanks.
Awesome!
I really love your education thanks very much it works perfectly on my toyota corolla u gonna be my master online
Awesome, thank you!
Stay tuned, I will be doing free giveaway very soon!
This procedure worked for my 2008 scion tc, thank you so much!!!!
Worked on my 2006 Sienna XLE. Took less than five minutes. Local Toyota Dealers wanted to charge from $60 (and take 2.5 hours to do it) to $120.
Thank you for sharing! 👍 I always wanted to know how much dealer is charging for it...
Worked easily on my 2004 Camry XLE, even thou the locksmith who cut my new key said "You- tube' would not work" AND the fine print from ebay seller, said key was NOT 'self' programmable- It's a ''chip type 4D67'' Many THANKS
😂 Of course it “wouldn’t work”... Cuz Locksmith cannot charge you an arm and a leg for it...
Will it work with toyota iq 2009.i have a mini meyer tool clone machine and transonder chips
I subscribed because of your help programing the 2005 toyota corolla xrs key earlier
Thank you so much, I greatly appreciate it!
Where to get the key for corolla?
Worked smoothly on my 07 Toyota 4Runner
👍🏻
Worked perfectly for mine, thank u!
Nice!
Thank you so much for this I did it and it worked for me.
Awesome!
Hi I would like to know if I need this key to be able to program the wireless remote to unlock my vehicle ?
I Really love this
Thank you it worked for 2006 Toyota hybrid limited highlander..... husband
1.order key online 2.then got the 🔑 cut by local locksmith
3. program the 🔑following this instruction
4.happy saving 💰....
works great! thanks for the videos
+Raymond Li
Thanks!
Worked perfect for my 2007 Sienna XLE Limited 😎
That's great!
yay this worked for me 2004 toyota runx. thank you
I have a Toyota Camry Solara 2008 period it worked great thanks
Okay I'm gonna try it and see if it works then I'll let you know, thanks so much
Hi @DIY-time. Thanks for the info. I lost my master key but have a copy that is programmed. Will this work using the copy? Please help!
Prefect instructions. Thanks
Thanks!
thank you it works on 2006 sienna 😊👍👍👍
Groovy!!! Thank you.
Works perfectly on my 07 solara as instructed 🎉
So if I bought a new preprogrammed ecu, I can reset my original key this way or do I have to get a new one? They were supposed to give me a new key but they didn't. Can I just buy new one and do this or use the original key?
Tried this today on two 4D chip w/ "DOT" transponder keys purchased on Amazon $20. Your procedure worked perfectly on both keys for my 2008 FJ Cruiser.
Awesome!
Awesome work, Sir! Thank you very much! I am NOT going to pay someone $150 to 'program' my key! I knew there had to be an easier way!
I'll bet you have you don't have to open and close the whole door though. I will try it with just pushing the little button the door pushes when it closes and let you know if it works. Just easier to not have to open and close the whole door.
Thanks again! Merry Christmas!
Thanks, you too! 🎁 🎄
Come on rick ,share the results man. Tips? Lol suspense sucks
Why are you so so so f__king lazy let the flies out of your car.
worked for 2006 Rav4 in Australia. Thank you.
+Robin Vee
Gereat! Thanks for sharing!
Thanks, I’ll try it! 2005 Toyota Tacoma 6 cyl base. 4 door.
2006 Toyota Sequoia
I didn't follow this video. But there is a link for additional information on the website. It included instructions for 2003-2007 toyota Sequoia. I followed method 2, but also the additional note(by jonathan eliff) after that is important the sequoia is closed and locked, use fob to unlock while in vehicle. security light will remain off when in programming mode.
Took 3 tries to enter programming mode, but the $13(+$2 to get it cut at local lock smith) oem key i bought on ebay worked perfect!
Thanks so much for your information
Awesome, thank you for sharing!