🎸How To Adjust Your Guitar's Truss Rod

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 167

  • @RobArnoldWorld
    @RobArnoldWorld  2 ปีที่แล้ว +12

    Thanks for watching! Please consider subscribing to my channel! Be sure to read this video's description for cool info you'll want to see!👆
    🔴🙏 HUGE thanks and shout out to my Patreon supporters! 👉 www.patreon.com/RobArnoldWorld
    👇READ MORE BELOW!👇
    ----------------------------
    Thank you SO much to the following:
    THANK YOU 👊 Alex Legend
    THANK YOU 👊 Andy W
    THANK YOU 👊 Anthony Bluhm
    THANK YOU 👊 Anthony Maroni
    THANK YOU 👊 Boku Senpai
    THANK YOU 👊 Brady Clark
    THANK YOU 👊 Brian Stadden
    THANK YOU 👊 Brian W. Rogers
    THANK YOU 👊 Cal Strickland
    THANK YOU 👊 Chris Santiago
    THANK YOU 👊 Curtis Doyle
    THANK YOU 👊 Daniel Richman
    THANK YOU 👊 Darron Bryant
    THANK YOU 👊 Dillon Brown
    THANK YOU 👊 Ethan Majstorovic
    THANK YOU 👊 Eyeless
    THANK YOU 👊 Formidable Frank
    THANK YOU 👊 Gavin Courtney
    THANK YOU 👊 Hervé Franco
    THANK YOU 👊 IrishTodd
    THANK YOU 👊 Ismael Ocegueda
    THANK YOU 👊 Jason Arnett
    THANK YOU 👊 Jeff Holland
    THANK YOU 👊 Joe Prostko
    THANK YOU 👊 Josh Maurer
    THANK YOU 👊 Kevin Smith
    THANK YOU 👊 Mandm Randall
    THANK YOU 👊 Marc Laakmann
    THANK YOU 👊 Mechanization
    THANK YOU 👊 Michael Wagner
    THANK YOU 👊 Mike Franco
    THANK YOU 👊 Mike H
    THANK YOU 👊 Nathan Hill
    THANK YOU 👊 nUm Music Official
    THANK YOU 👊 Olivier Rouleau
    THANK YOU 👊 Paul Thomas Presley
    THANK YOU 👊 Rich Arnold
    THANK YOU 👊 Rob Bryant
    THANK YOU 👊 Rocko Marrufo
    THANK YOU 👊 Russell D Morrow III
    THANK YOU 👊 Ryan Lesnick
    THANK YOU 👊 Ryan Tibbert
    THANK YOU 👊 Sam From Salem
    THANK YOU 👊 Samuel Zuker
    THANK YOU 👊 Sherri Fetzer
    THANK YOU 👊 Steve Martin
    THANK YOU 👊 Taylor Crawford
    THANK YOU 👊 Thomas Bryson
    THANK YOU 👊 Thomas Spoor
    THANK YOU 👊 Todd Jay
    THANK YOU 👊 Travis Tutwiler
    THANK YOU 👊 TriDoc
    THANK YOU 👊 warduiz
    THANK YOU 👊 Aaron Prentice
    THANK YOU 👊 Alex White
    THANK YOU 👊 Brandun Keck
    THANK YOU 👊 Dakota Winston
    THANK YOU 👊 Gonzalo Ferniz Jr
    THANK YOU 👊 Guillermo Flores jr
    THANK YOU 👊 Harry Wadley
    THANK YOU 👊 Ian Roberts
    THANK YOU 👊 Independence Guitar
    THANK YOU 👊 Ingo Deißenroth
    THANK YOU 👊 Ivan Zemchanka
    THANK YOU 👊 Jack Krolo
    THANK YOU 👊 James Beard
    THANK YOU 👊 Jed Marsillo
    THANK YOU 👊 Jerry Guardado
    THANK YOU 👊 Joe Hinton
    THANK YOU 👊 JR Tasker
    THANK YOU 👊 Kevin Henderson
    THANK YOU 👊 Koki Junes
    THANK YOU 👊 Kris Hotchkiss
    THANK YOU 👊 Lucas Van Cleef
    THANK YOU 👊 Martin Hubrich
    THANK YOU 👊 Max Evans
    THANK YOU 👊 Michael Mckee
    THANK YOU 👊 Michele Porcu
    THANK YOU 👊 Mohamad Hafiz
    THANK YOU 👊 Nate Bunnage
    THANK YOU 👊 Randy E.
    THANK YOU 👊 Ricky Coppula
    THANK YOU 👊 TheJustJoshing
    THANK YOU 👊 TX.Hooch
    THANK YOU 👊 walkamong theignorant
    And a special thanks to all of my Patreon supporters not mentioned here!🙏

  • @franktothemax
    @franktothemax 2 ปีที่แล้ว +30

    What a perfect, concise, and to-the-point demonstration on something that I bet 95% of the guitarists out there have no idea about. Solid as always, Rob 🤘🏻

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      Awesome Frank!👊

    • @Themantismaster
      @Themantismaster หลายเดือนก่อน

      ​@@RobArnoldWorldI read that as wank

  • @thomasbaldiscola4671
    @thomasbaldiscola4671 ปีที่แล้ว +6

    I can't THANK YOU enough for posting this! I was always afraid to adjust my truss rod. I just set up my 7 string that had buzz issues, and my bass! No more buzzing!

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว

      Great to hear it man and happy to help! 🎸

  • @parallaxgaming5070
    @parallaxgaming5070 2 ปีที่แล้ว +14

    I swear every how to video you produce has made me more confident about working on my own guitars. So direct to the point and spoken clearly great video rob 🤘🏼

  • @Allie-w1l
    @Allie-w1l 9 หลายเดือนก่อน +3

    Thank you for making it SUPER CLEAR which way to turn the truss rod. I thought I'd have to remove the strings to remove the cover as well. Actually, using the test you show at 4:30, I've realized I don't need to adjust the truss rod yet. Thanks again.

    • @RobArnoldWorld
      @RobArnoldWorld  9 หลายเดือนก่อน

      Right on! Happy to help!🎸

  • @cmberrian
    @cmberrian 9 หลายเดือนก่อน +2

    Dude, what a great, thorough and easy to understand video. I've been playing for a long time and the truss rod has always been something that has been a mystery to me and all instructional things I've ever read or watched have made it sound so much more complicated that by the time I was done I barely knew the difference between clockwise and counterclockwise. Your presentation is so helpful .Thank you and great job!! 👍

    • @RobArnoldWorld
      @RobArnoldWorld  9 หลายเดือนก่อน

      I'm super happy to hear that man! And glad to have helped! Cheers! 🎸

  • @SleeplessSwan7
    @SleeplessSwan7 2 ปีที่แล้ว +2

    your guitar setup tutorials are just amazing. Straight to the point with no fancy equipment required. I really had a hard time figuring out truss rods adjustments when I started learning the guitar because all the tutorials I could find required rulers and loosening the strings, not to mention how they make adjusting the truss rod sound too terrifying because of how often they mention 'breaking your guitar'. It took me years to collect enough courage to do more than just one turn to finally set the neck up correctly. Thank you so much!

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      Glad you appreciated it man and thanks for tuning in! Happy you got the hang of it as well!🎸

  • @P3wnJ4bb3r69
    @P3wnJ4bb3r69 8 หลายเดือนก่อน +4

    Would've never imagined that my favorite guitarist would also be the guy that teaches me everything i know about doing tech work to the guitars i try to emulate his sound on.😅

    • @RobArnoldWorld
      @RobArnoldWorld  8 หลายเดือนก่อน

      Hey, sounds like a win win relationship! 👊

  • @llessthan
    @llessthan 6 หลายเดือนก่อน +2

    I had major fret buzz on my lower frets and put off adjusting my guitar for months due to fear of messing something up. This video made the process seem like a breeze and I was able to adjust quickly with no issues. Thanks a bunch!

  • @jovanbrothers
    @jovanbrothers 2 ปีที่แล้ว +2

    I know how to do all of this, but I always watch to show my support. Thanks Rob!!!

  • @stevecatalano9856
    @stevecatalano9856 2 ปีที่แล้ว +4

    Hey Rob, love these instructional videos. Can you do a video on pickup adjustment and height?

  • @louisvalentino5110
    @louisvalentino5110 3 หลายเดือนก่อน

    Great video explanation. So many of the video's on TH-cam never get to the points you covered after a long time of listening. Thank you.

  • @joeconti3599
    @joeconti3599 2 ปีที่แล้ว

    This is one of the best videos on truss rods I've seen.

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      I really appreciate that Joe!🙌

  • @billk9799
    @billk9799 2 ปีที่แล้ว

    Those videos are super awesome, coming from a professional /touring musician, to the point and as simple as it gets! Really inspiring to a lot guitarists who are terrified to mess with truss rods, bridges etc

  • @M.C.R.SYNTRN
    @M.C.R.SYNTRN 2 ปีที่แล้ว +1

    These tutorials will come in handy soon, my guitar tech is retiring shortly and i will need this information to do it all myself!

  • @deafworldstudios8644
    @deafworldstudios8644 2 ปีที่แล้ว

    Its D.W. here man! Thanks Rob! You are one of my go-2s on Guitar maintenance. Good news! I finally got my Jackson DKMGT Reverse Headstock (Needs a new paint job but I am working on that here soon) oooooooo....... That guitar is badass! ESP LTD Viper 300!!!!! I know you used it for the Sp Lit video. But I am waiting for that Guitar to be sold one day at G-Center. That guitar is next on my list!

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      Awesome bro! That Dinky sounds rad!

  • @mattbarden803
    @mattbarden803 2 ปีที่แล้ว

    The truss rod to adjust action rather than the bridge tip is spot on. Wasted too many hours screwing bridge height when the whole thing was just out of wack and needed adjustments.

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      👌 Sometimes you just don't know, until you know.

  • @waas_sappening
    @waas_sappening 7 หลายเดือนก่อน

    Beginner guitarist here. Super helpful video! My Ibanez RG421 has the same issue as this guitar you are adjusting.

  • @shazbotsmash2422
    @shazbotsmash2422 2 ปีที่แล้ว +1

    You saved me money! I was going to take mine to a shop. Also RIP Trevor Strnad

  • @morbidcorpse5954
    @morbidcorpse5954 2 ปีที่แล้ว

    Oh my goodness! I need just did a bend and pinch harmonic like you did in the DVD video years ago. Only took me a decade to get it right. Yes! I'm so happy!

  • @jedmarsillo
    @jedmarsillo 2 ปีที่แล้ว +1

    Quality as always Rob. One good tip, when freting the 1st and 17th fret. You can use a capo on the 1st fret freeing up a hand to use a business card or better yet a feeler gauge at the 12th fret. 🤘

  • @aidanandtyler5138
    @aidanandtyler5138 6 หลายเดือนก่อน

    Beautiful explanation. The best I’ve seen so far.

    • @RobArnoldWorld
      @RobArnoldWorld  6 หลายเดือนก่อน

      I appreciate that man, and thanks for tuning in! 🎸

  • @RedDed228
    @RedDed228 2 ปีที่แล้ว +1

    Man I love the Viper so much damn. That is so nice I am so jelly broski.

  • @clcartlidge
    @clcartlidge 2 ปีที่แล้ว

    I was literally looking for a video on this and it just so happens you dropped one 🤣 ! Crazy man, love your work on yt and with chimera

  • @al6377
    @al6377 ปีที่แล้ว

    Awesome video, well explained in detail. Great job, Rob! After also having seen your video about the evertune system setting, which is on the same, great level as this video, I decided to subscribe to your channel.

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว

      Hey I appreciate that man, and welcome aboard! 🎸

  • @adeypayne9669
    @adeypayne9669 ปีที่แล้ว

    Absolutely spot on tutorial Rob as always 👏 However, and not trying to encroach, just as a precaution for any newbs, and inexperienced individuals, only adjust 1/4 turns at a time, even with on guitar's with a huge neck relief situation, at least until you become more experienced at knowing how much the truss rod adjustment affects the guitar you are setting up 👍🤘

  • @619dar
    @619dar 2 ปีที่แล้ว

    I think that I may of already told you about my Hondo guitar that also had to have the truss rod adjusted and really did the trick once my friend got the neck back in line again. After that the guitar never went out of tune and not only did it sound better but also made it a lot easier when changing strings. So Rob thanks for another great video. \m/

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      Nice! Glad to hear you got it going again Darren!

  • @AmericanMe
    @AmericanMe 2 ปีที่แล้ว

    My fav LTDs are the "handwritten" style old logo, hell yessss

  • @Jamerzh
    @Jamerzh 14 วันที่ผ่านมา

    Great video. Clear and to the point.

  • @martinezdecap
    @martinezdecap 2 หลายเดือนก่อน

    Hello, thank you for the video! I’m curious, how do you know when to make the adjustments at the bridge rather than at the neck with the truss rod?

    • @RobArnoldWorld
      @RobArnoldWorld  2 หลายเดือนก่อน

      Personally, I see if I can make all the adjustments I need to make with the truss rod first. Sometimes though, that isn't enough, and then I'll move on to adjusting the bridge height.
      Occasionally, you can tell where the biggest adjustment needs to be made just through inspection. Meaning, if your bridge looks way too high, perhaps it may be better to just lower it first and then see where you need to go from there.

  • @thatfknlefty4530
    @thatfknlefty4530 2 ปีที่แล้ว

    The truss rod has always been scary to me. This has helped. Thanks for all the videos!

  • @adamkahn8645
    @adamkahn8645 ปีที่แล้ว

    I love your choice in strings

  • @roybenavidez6098
    @roybenavidez6098 2 ปีที่แล้ว

    Thank you for all these How To videos. I've learned a lot. 🤘😀

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      Glad to hear it Roy, and I appreciate you watching!

  • @АндрейСтеблина-л1х
    @АндрейСтеблина-л1х 5 หลายเดือนก่อน

    God bless you man! Now my neck is nice and straight 😊

    • @RobArnoldWorld
      @RobArnoldWorld  5 หลายเดือนก่อน

      Awesome! That's what I like to hear!

  • @ronanfurlongmusic9245
    @ronanfurlongmusic9245 22 วันที่ผ่านมา

    Wish I’d known this before, really helpful, thanks mate🙏

    • @RobArnoldWorld
      @RobArnoldWorld  21 วันที่ผ่านมา

      Haha at least we've got it now! Thanks for tuning in!🎸

  • @jezmez68
    @jezmez68 หลายเดือนก่อน

    Great video. Kind of freaked me out how many times you turned it because I see most people say only go an 1/8th of a turn at a time. Also, it would be good to know if you loosened the strings first? I would imagine you would want to do that if you were adding tension to the neck.

    • @RobArnoldWorld
      @RobArnoldWorld  หลายเดือนก่อน

      Nope! I don't loosen the strings. It's not necessary as the overall adjustment is minor.

  • @nc1969
    @nc1969 2 ปีที่แล้ว

    Appreciate the very straightforward explanation 👍

  • @seanner69
    @seanner69 9 หลายเดือนก่อน

    Do you have any vids about adjusting a fixed bridge afterwards? I lowered my bridge years ago and then haven't touched this guitar in years. Just took it out and noticed the relief has run wild. I assume if you straighten it out and are getting crazy buzzing or dead spots on a particular side, then raise that side until it stops? Or is it better to raise the bridge uniformly? It's a tune-o-matic on an older mh-400nt. Thanks for all the vids man! One of the most entertaining and useful guitar channels out there.

    • @RobArnoldWorld
      @RobArnoldWorld  9 หลายเดือนก่อน +1

      Thanks man!
      You can certainly make height adjustments from your bridge, but I like to do that after I've set my neck. Over time, the neck is the thing that will change based on it's environment, where the bridge, being metal, should always be where you left it.
      After your guitar has sat awhile, if you go to play it and the action has changed, you'll want to address that with the neck first.
      After that, you can fine tune things or address trouble areas by making bridge height adjustments. I like to adjust each side uniformly if possible, and then individually if necessary.
      The whole process is a balancing act, and even the most minor adjustments have an effect on the outcome.
      With patience and persistence, your guitar can be strumming nicely again in no time!🎸

    • @seanner69
      @seanner69 9 หลายเดือนก่อน

      @@RobArnoldWorld ok sweet, good to know. Ya last time I did this I mostly knew what I was doing but not fully 😂 hence why I started from the bridge. No idea what the original position was at this point so I'll definitely start with the truss and play around from there like you suggested. Thanks again! 🐐

  • @markolivares6943
    @markolivares6943 2 ปีที่แล้ว +1

    Damn that thing is a beast.

  • @MetalDozz
    @MetalDozz 2 ปีที่แล้ว

    Perfect tutorial Rob, killing it as always!

  • @Odyssey889
    @Odyssey889 2 ปีที่แล้ว

    Great video now I also have a bit of knowledge about the truss rod thanks to you 🤘🏼

  • @nafis6668
    @nafis6668 2 ปีที่แล้ว

    Notes towards the nut need more fret clearance to vibrate freely, hence we need some neck relief by adjusting the truss rod, like Mr. Arnold did.

  • @creepymcpeepers
    @creepymcpeepers 2 ปีที่แล้ว

    I want to get the notched strait edge from stew Mac soon jsut haven’t had the money but I have 4 job interviews this week

  • @antigoatl9620
    @antigoatl9620 2 ปีที่แล้ว +1

    I have a viper 100 lame right but has a Crack neck any ideas into how to fix

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      Wood glue, tooth picks or something similar to get the glue down into the crack, and clamps! That's all I can say without getting a look at it myself.

    • @antigoatl9620
      @antigoatl9620 2 ปีที่แล้ว +1

      @@RobArnoldWorld I was thinking the same now got to get some wood clamps

  • @Zimak0v
    @Zimak0v 10 หลายเดือนก่อน

    Well. Here i am yet again watching setup vids at 10pm lol. I’m getting some dead spots on that MH I just got. I automatically went and raised the bridge. That resolved some spots but around the 12th fret it’s dead.

    • @RobArnoldWorld
      @RobArnoldWorld  10 หลายเดือนก่อน +1

      I like to start with truss rod adjustments, then move onto bridge height adjustments if necessary. It's a balancing act between the two. But if I can avoid adjusting the bridge, I will. Sometimes though, the guitar tells you what it wants, and you must oblige!

  • @davidgee125
    @davidgee125 2 ปีที่แล้ว

    As always you are the man Rob ✊🏿

  • @nosivo13
    @nosivo13 2 ปีที่แล้ว

    So I tightened to have flat neck but I only to where it got snug. How much more can I go? Never done this and don’t wanna break. Great vids

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      I think that you can take it a little further! Certainly to where you'd like it to be, which should be with a slight amount of relief. Just barely noticeable is how I like it.
      And by "snug", I assume you mean that there's some resistance, which is to be expected. But if it's nearing un-turnably tight, then you've gone too far.

  • @geraldrauch1701
    @geraldrauch1701 2 ปีที่แล้ว

    rob!!! picked up the nomad cleaning tool set after seeing ur video...awesome tools, but my question is...why did this invention take so long???!!! the make-up brush part is great for cleaning around amp pots...cheers brother!!!

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      Awesome Gerald! Yeah man my guess is that it's probably been around for a minute, but nobody had heard of it. So I'm happy to be spreading the word about an excellent product! Glad you dig it too!

  • @adamneill6492
    @adamneill6492 2 ปีที่แล้ว

    Hey Rob! Curious about your preferred setup - what's your string height/action at 12th fret for 1st and 6th string? And your EMGs, how far from the strings for bridge pickup? Thanks Rob love the channel, keep it up!

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      Thanks Adam! Happy to hear it! Every time I have a guitar set up by ESP, I say this... "Drop C, 11-52, with a nice low action". And that's how I receive em'! Nothing technical about it. (in terms of actual measurements). It's just a feel/look thing for me.
      Same with the pickup height... I try and get it close to the strings, but not close enough to impede in any way whatsoever. I also keep the treble side slightly higher than the bass side on my pickups, with hopes that leads will stand out a little more when playing live. 🎸

    • @adamneill6492
      @adamneill6492 2 ปีที่แล้ว

      @@RobArnoldWorld awesome man, thanks for the info!!!

  • @chrisescarcega3106
    @chrisescarcega3106 ปีที่แล้ว

    What about setting bridge height? My neck is pretty straight but my bridge on one of my EC 1000s was slammed to the body.

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว

      I'll think about addressing that topic in a new video!

  • @Martinroot
    @Martinroot 2 ปีที่แล้ว +1

    Damn thouse pickups thump... BRUDLE!!!
    Wich they still used the old Ltd logo...

  • @mdh-2
    @mdh-2 2 ปีที่แล้ว

    Rob - late to the show but finally found your site. Great video by the way. Quick question: what are your thoughts on loosening string before truss rod adjustments? Is it necessary? Thanks!

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      Thanks Mark! In my experience, loosening the strings is unnecessary. A retuning however, will definitely be necessary. 🎸

  • @ozan.arslan
    @ozan.arslan 2 ปีที่แล้ว +1

    Great video! Always had question marks about touching "that part" of the guitar. Nicely explained, plain and simple. I remember that Viper from another video where you whistled as a reaction to it's awesome tone after you made the setup. You made BokuSenpai, one of your subscribers buy a Viper with that whistle:) This one is that Viper, am I correct? It's a shame that he replaced the pickups though, the tone was amazing! Anyway it's all about the taste.
    Great content!

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +2

      Haha awesome! I hope Boku loves his Viper! And yes, this is the guitar! It's also the Viper I used in Chimaira's very first video, "Sp Lit".
      So you didn't like the tone from the end of the video with the Fat 55's?

    • @ozan.arslan
      @ozan.arslan 2 ปีที่แล้ว +1

      @@RobArnoldWorld Yes, I remember that too! Well, of course I liked it, still a kick ass tone, also the guitar itself is a thing of beauty, with that shiny blue color. But the previous tone was majestic, it was BRUTAL. Made both of us whistle just like you did :) I am a lefty, the life is hard when you obsess about guitars and be a lefty at the same time! Otherwise I would have also gone with a Viper, all because of that video of you set up this gorgeous guitar.

  • @chrisgatecliffe
    @chrisgatecliffe 2 ปีที่แล้ว

    Hi Rob. Glad you said it's possible to do this from the truss rod only. I had my guitar tuned over lockdown, and even though they tuned it great, the action of the strings felt really slack, so while this may suit low playing guitarists, when it came to playing fast palm muted metal songs for example, it felt really loose and just didn't feel the same. I've just kind of lived with it for a couple of years, but when you can't play certain things the same you could before you have to make that change.
    For your sound have you always had this tuned how you have it on this vid, or did you ever play it with a tighter action to get your crunching sound when palm muting? I met you in Leeds UK in 2004 at a signing, which subsequently after seeing you I pulled the plug and got my first guitar which was the ESP I am using to this day as the guitars just sounded exactly how I wanted mine to sound. Weirdly I actually wanted to ask you this very question at the sign in but wasn't something you could or would want to answer in the middle of hundreds of people wanting an autograph.

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว

      Awesome man! I remember some good shows in Leeds! And glad to hear your ESP has treated you well for all these years!
      Personally, I prefer a lighter gauge and higher tuning. My sweet spot is drop C, with 11-52's. I've got tons of other videos describing that setup if you're interested! Cheers and thanks for tuning in!🤘

    • @chrisgatecliffe
      @chrisgatecliffe 2 ปีที่แล้ว

      @@RobArnoldWorld thankyou Rob, glad the North of England has some good memories for you.
      I will certainly check out the rest of your videos and picking up some more pointers. Thankyou for the reply and also for the memories. What a time to be alive where you can hear from someone you grew up listening to over 20 years ago, really appreciate it.

  • @J.Shambles
    @J.Shambles 8 หลายเดือนก่อน

    Was having buzzing above the twelfth fret on the low e and a strings. Tightened the truss rod and it just made the buzzing spread to all the frets on those strings. Not really sure what to do

    • @RobArnoldWorld
      @RobArnoldWorld  8 หลายเดือนก่อน +1

      Tighten the truss lowers your action (distance from the strings to the fret board), and increases the potential for fret buzz. So you'll want to back off your truss rod a little, and perhaps even consider raising your bridge a bit. But first, I'd start with loosening your truss and seeing what happens.

    • @J.Shambles
      @J.Shambles 8 หลายเดือนก่อน

      @@RobArnoldWorld Thanks so much for the reply! I loosened the truss rod and raised the bridge a bit and now I’ve got no more buzzing. The action is noticeably higher than it was before but it’s still comfortable to play.

  • @ryanriffs_1349
    @ryanriffs_1349 2 ปีที่แล้ว

    The VB-300 sounded so good. Bet it plays real nice now

  • @PapaKeegs001
    @PapaKeegs001 2 ปีที่แล้ว

    More videos with this guitar please

  • @Dfsmiley
    @Dfsmiley ปีที่แล้ว

    thank you so much for this video Rob my Epiphone Prophecy Explorer never played better after i used this video to make adjustments.

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว

      That's what I like to hear man! 🎸

  • @adamkahn8645
    @adamkahn8645 ปีที่แล้ว

    Also, I don’t know if many people think about this. Say I run 9s on my guitar but wanna have slightly tighter treble strings, so I put a 9.5 and 12.5. By using the string tension calculator that SJ supplies, put your string gauges in and the tuning you are using. Write down the total tension number at the bottom. Then change the treble strings to the gauges you are putting on now. Check that total tension number. This will help you gauge just how much adjustment your truss rod will need to get it back setup to where it was originally

  • @shuxuhuang207
    @shuxuhuang207 ปีที่แล้ว

    Hello,which wrench of truss rod is best for my fender cv 70s bass? 3/16 is too big obviously, and 4mm is a little bit loose , it almost makes me crazy😢 thanks

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว +1

      Unfortunately I'm unfamiliar with that instrument, so I can't say. I recommend a multi tool allen wrench set like this, which should have any wrench you need for any job!
      amzn.to/3QglsQs

  • @JPC-do8xi
    @JPC-do8xi 3 หลายเดือนก่อน

    My new Ec-1000 deluxe action was way to high and needed to drop the bridge to start🤷‍♂️

    • @RobArnoldWorld
      @RobArnoldWorld  3 หลายเดือนก่อน

      Sometimes that's what you've got to do! But it's always a good idea to at least take a look and confirm that your neck is straight first.

  • @mylogify
    @mylogify 2 ปีที่แล้ว

    First time I made intonation after your video :). I had made the low action through the bridge unlike truss-rod, I didn't trust myself on truss-rod :D. Before your video's release, I hope I didn't mess up everything, but I did intonation after that, they are in tune now, I wonder If I sacrificed some sustain, after doing this way, because I had to move each 6 string holders about 2mm's to the left when guitar sits like yours to be able to intonate 12th frets. :). EDIT: Loose strings and remove springs, then adjust the tremolo height with spuds.

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +2

      Hey we live and learn! Consider what you did an experiment! And if it worked well for you, then it's all good! And perhaps with now seeing how to adjust the truss rod, you can use that knowledge to further dial things in!🎸

  • @DizzyDez613
    @DizzyDez613 2 ปีที่แล้ว +1

    I FUCKING love you, Rob Arnold. ♥️

  • @anythingnothing1874
    @anythingnothing1874 2 ปีที่แล้ว

    Got a couple acoustics this might help👊🏼good tips man🤘🏻

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      Definitely brother!🤘 Acoustic necks notoriously bow near the 12th fret.

  • @Hordak069
    @Hordak069 2 ปีที่แล้ว

    Very well explained. Thank you for that.💯👍

  • @wesleybartlett9618
    @wesleybartlett9618 ปีที่แล้ว

    Does it matter if you're in D standard or does it have to be in E

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว

      All the principles apply no matter what tuning you're in!

  • @zaainzahir5485
    @zaainzahir5485 6 หลายเดือนก่อน

    Hey Rob! Cool video, However, is it true that you need to keep the guitar down for the day or night on the lowest possible tune after adjusting truss rod? My schecter hellraiser fell from my chair face down, and the string action went damn low, literally stuck to the fretboard, I turned the truss rod anti clockwise 2 3 times, and also adjusted the bridge a little and it sounded like an angel, but my guitarists friends told me to immediately put the guitar strings on the lowest tune or completely loose for the night or 2, or else it might damage my guitar. Is this true?
    Zaain

    • @RobArnoldWorld
      @RobArnoldWorld  6 หลายเดือนก่อน

      Hey Zaain- I've never heard of having to relieve tension across the neck for a day or two as you described...
      But I also can't really say or offer much advice without actually seeing your guitar myself, and assessing what might have happened to it.
      Does it have a bolt-on neck? Because from what you described, it almost sounds like your neck may have gotten displaced or something from the body.

    • @zaainzahir5485
      @zaainzahir5485 6 หลายเดือนก่อน

      @@RobArnoldWorld thanks for the reply. It’s a Set-Neck w/Ultra access.

    • @RobArnoldWorld
      @RobArnoldWorld  6 หลายเดือนก่อน

      @@zaainzahir5485 Hmm, not sure then without seeing it for myself. I hope you're able to get it playing well again!

  • @guidlines
    @guidlines ปีที่แล้ว

    So you don't have a Capo to put on the first fret for your little credit card technique??

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว

      A capo is something I've actually never owned! I wouldn't mind having one around the lab.

  • @matthewweyandt5995
    @matthewweyandt5995 หลายเดือนก่อน

    Thank you!

  • @Freedum_Fries
    @Freedum_Fries 2 ปีที่แล้ว

    Cool trick from your buddy at ESP

  • @Namelessforever_
    @Namelessforever_ 2 ปีที่แล้ว

    The only dude I TRUSS to show me how to do this properly is Rob Arnold! 😊🤙

  • @BusterRoonie
    @BusterRoonie 11 หลายเดือนก่อน

    Great video! Thanks!!🙏🏼

  • @ManosHalividis
    @ManosHalividis 2 ปีที่แล้ว

    Awesome and very very usefull video! Thanks!!

  • @mcoon1987
    @mcoon1987 2 ปีที่แล้ว

    This is great info for newer players. For years I never understand why every spring and fall my action would get all out of whack. Knowing how to adjust the truss rod is imperative to a properly playing guitar.

  • @IndependenceGuitar
    @IndependenceGuitar 2 ปีที่แล้ว

    Yep, thats how ya do it. Do t worry about measurements and specs. The spec is “does it feel good?”. 🤘

  • @DizzyDez613
    @DizzyDez613 2 ปีที่แล้ว

    A black baritone viper in B standard. Yup. It’s definitely a doom machine.

  • @antonstefanov2146
    @antonstefanov2146 3 หลายเดือนก่อน +3

    Made about 15 clockwise turns and truss rod snapped off and punctured my skull, doctors said it should stay there.

  • @sashabagdasarow497
    @sashabagdasarow497 ปีที่แล้ว +1

    To anyone ALMOST adjusting your guitar perfectly, try neck shimming, please do!

  • @cmdrefstathiusplacidus9003
    @cmdrefstathiusplacidus9003 4 วันที่ผ่านมา

    I saw an Italian guy put a credit card under the strings and then use Scotch tape to bend each end and secure it

  • @robertb8673
    @robertb8673 ปีที่แล้ว

    You could put a capo on the first fret, if you need a free hand for you card test. 🤷‍♂️

    • @RobArnoldWorld
      @RobArnoldWorld  ปีที่แล้ว +1

      All these years, I've never owned a capo! One day I will!🎸

    • @robertb8673
      @robertb8673 ปีที่แล้ว

      @@RobArnoldWorld maybe it's time.
      Only for work of cause.

  • @ForLorNVuLgaR
    @ForLorNVuLgaR 2 ปีที่แล้ว +1

    did i see that right!? Drop G tuning on a 7 string?? What song requires such monstrosity....

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +2

      "Jade" from our Pass Out record!

    • @ForLorNVuLgaR
      @ForLorNVuLgaR 2 ปีที่แล้ว

      @@RobArnoldWorld Dude wtf was the thought process for that!? It was so advanced on so many layers...

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      @@ForLorNVuLgaR Ha! Mark Hunter was all about those LOWWWWW tunings back in the day!

    • @ForLorNVuLgaR
      @ForLorNVuLgaR 2 ปีที่แล้ว +1

      @@RobArnoldWorld What!? Is that what happened back during the "nu metal" days of songs like Sp Lit?

    • @RobArnoldWorld
      @RobArnoldWorld  2 ปีที่แล้ว +1

      @@ForLorNVuLgaR Yes that's why we used 7 strings early on. Korn, Deftones, etc, were all using 7 strings, and we got caught up in that too!

  • @pricetag30
    @pricetag30 ปีที่แล้ว +2

    Your NOT supposed to adjust string height with the truss rod!

    • @y2kcurran
      @y2kcurran 11 หลายเดือนก่อน +1

      Yea, there were quite a number of red flags in this for me...but there are probably more than one way to skin a cat. I can see scenarios where this would help. I guess it's everyone's responsibility to learn ALL the options of adjustment, the impact of those, and to choose where they like to focus on. I tend to set relief first, then action if needed with the bridge.

    • @MBoucher-xu9xj
      @MBoucher-xu9xj 3 หลายเดือนก่อน

      Yeah in most cases you can just adjust the height with the truss... unless you went full retard and messed up saddle/bridge height.

  • @TheAngryGeezerYT
    @TheAngryGeezerYT 7 หลายเดือนก่อน +1

    A capo can be a third hand bud just saying lol

  • @Nat-O
    @Nat-O ปีที่แล้ว

    Refen