ฝัง
- เผยแพร่เมื่อ 2 พ.ค. 2022
- Back on the 701 project. I have begun to clear out the airplane factory which has been used for storage while I have been making some changes to the shop and house. This video is mainly assessing the status of the project and making some small steps to get going on it again, mainly working on the slat tips and looking over the flaperons. I also delve into why I prime internal surfaces and why I think it is necessary.
More about us here hillsgun.com
Below are our affiliate links to products used in my construction process.
Neiko Rivet Gun amzn.to/2np9rMO
Chicago Pneumatic 1/4" Air Drill amzn.to/2lhF7ij
Marson Hand Riveter amzn.to/2q8XfQ8
Vise Grip Sheet Metal Pliers amzn.to/2IwLGcS
Midwest Aviation Snip Set amzn.to/2qaDaZP
Andy Snips amzn.to/2qavWEV
Beverly Style Shear amzn.to/2JkXS1G
Rivet Cage amzn.to/2q8cLMO
CP Angle Die Grinder amzn.to/2qbLdW3
CP Straight Die Grinder amzn.to/2GBsKgz
Neiko Step Drills amzn.to/2GBWRVh
Neiko Large Step Drill amzn.to/2q7fNRk
Instrument Hole Punch amzn.to/2GZhcD
1/8" cleco's amzn.to/2xeXpaE
3/32" cleco's amzn.to/2wdbIiT
5/32" cleco's amzn.to/2x25job
Olfa PC-L Knife (replaces the P-800) amzn.to/2mGTgq1
Strap Duplicator amzn.to/2s0W8SU
Rivet Fan Spacing Tool amzn.to/2sS8L2C
Black and Decker Cordless Screwdriver for deburing amzn.to/2sSevtr
Countersink for deburing amzn.to/2sdfaI5
Please bear in mind that these are my opinions and the techniques I have chosen to use in my shop for my projects. You are responsible for your own choices and I take no responsibility for how you might use any information presented here.
~-~~-~~~-~~-~
Please watch: "Building A Grown Up Quorn Tool & Cutter Grinder: Part 1"
• Building A Grown Up Qu...
~-~~-~~~-~~-~ - วิทยาศาสตร์และเทคโนโลยี
Hello friend. It’s good to see you back on the aircraft project.
And about time to 😀thanks
Hi From Ireland.
Good to see you back, Looking Forward to getting some good tips, Thanks.
Thanks, I will do my best.😀
From Paul. Hi Dan I did not know you had your own skunk works Zenith 701 project don't forget to keep you nose up on take on take off. lol
Yes it has become a long term project. It was what I originally started the u tube channel with, and now it needs to be another of the projects that gets finished
I didn't know that you where in to hot wire foam cutting. I'm trying my best to start u tube channel, started off with videos of how I hot wire cut foam cores for engine blocks V10, something that went along with the cam shaft. Next step is Mac iMovie, bin watching iMovie tutorials on TH-cam, makes my head swim, for my self I findMac mac hard to use, like the return key, it's the enter key. I use to be into RC planes, devorce put a end to that, I think about restarting since I live in farm land with all these open feilds around where I live, that would put to many irons in the fire
yes had a hot wire cutter of one sort or another for years, been thru rc planes and still have quite a bit of stuff but not sure if I will go back to it or not, hopefully not.
Dan, is this an RC plane your building, or a full size plane? Thanks again for sharing!
It’s only an rc if you consider a 27 foot
wingspan to be in the realm of rc. It’s a 2 seat, high wing all aluminum construction that accommodates about a 100 horsepower engine
You STOL on your project builing a 701 and no one has picked up on this pun? LOL
Apparently not