When I turn my leds to white there are 5 lights that go yellow and for some other colors they are different is there any fix without taking them off your wall
mine aren’t even out of the rolls yet, it fell off of my bed when I was moving them, one of three fell off and won’t work, the other two only work at a certain angle, I literally just got these for Christmas and my mum bought them, it took so much convincing for them, I don’t know what to do, oh jeez please help
Go onto amazon or ebay, and search for 'led strip connector' you then need to find the right size for your strip so if you have white it will only be 2 pins. BUT you can have white at 8mm, 10mm or 12mm so measure your strip width first! Then you have RGB which will be 4 pins (RGB and +) again there are either 10mm or 12mm for this tyoe so measure first Then you have RGBW which will be 5 pins (RGBW and +) again there are either 10mm or 12mm for this type so measure first You can increase youe search term detail, by saying something like 'RGBW LED strip connector' or 'white LED strip connector' There are also connectors that have leads on them so you can wire into a power supply. Or cables that have a leads so you can go around corners!
my green light isn't working on all the leds exept the starting part... i suppose it is the part you replaced in this video that is broken but how do I replace the fist one??
What happens if it works up until a certain point then stops for the rest? It worked just fine until it was bent in a certain area, now the red channel from that section and onwards does not work
i have 9 sections where blue doesn't work and 1 section where red doesn't work. i have many replacement strip sections but wanna see if i can fix them. if i push on the resistor on the faulty strip with a screwdriver or wire it comes back on and works fine. I hear this is because of a dry solder joint, is there a video showing how to fix these?
i just bought led lights for my first time and i was so happy but then only half the things works, i really hope this vid helps or else imma be sad until tomorrow
Mine is cut through the cut point can I solder those back together? I don’t have replacement LED strip. And that tape clamp you have won’t fit in my application.
Hi just wondering if i had a 5m long 5volt at 2amps how do you work out how much power does it use on a 12volt system is it 10watts per hour or is it 50watts per hour? Any help would be much appreciated thanks.
Hi would you know why I am only getting blue from my strip? I get nothing when connected correctly but in revers pols blue only and the controler is non responsive.
Hello, tried it with my strips but the cut end just lights up in white. I tried to connect two 5m strips together this way, and the other doesn't light up.
Please help. The small pointy things that connect them together have all fell off. I dont know what to do and i only just got them for my bday. Is there a solution to this??
im installing mine now and when I was attempting to use a corner connector to change the direction the three lights before the connector stopped working please helpppp
I bought the most expensive ones so they last. now they're up on my ceeling where i can barely reach em and 3 of the led dots just completely ignore the colour green. but when i press fade of jump it gets worse and they show different colours then they're supposed to. wtf am i supposed to do now? how do i fix that?
I could use your help. I purchased 5 sets for a studio. The design om the on off to USB is a horrible design. It starts with the button but the cord is super short, then there is a longer one of course for the USB. Problem is My studio desk is big and I need more lengthen the wite of the button side a foot or so, so I can drill a hole and be able to reach the button. Can I do this and if show should I not use line from tje USB side as that is more splicing but get what type of wire to add 12" or 16" max after button so I can place the button within reason? THANKS I subscribed!!
There is one faulty section of my LEDs and they are affecting the rest of them. When I press red the lights turn blue and the faulty section either doenst work or turns green. When I press blue the lights turn red. How would I fix this. I really dont want to have to buy a whole new set of lights
There’s a billion of these. This is the first video that pops up. There is not a single video on how to fix the BEGINNING SECTION of a strip. I have no faith in humanity.
I already installed mine and they worked fine for a few days until a section of them started turning a different light like when I put white that section is green and it does this for al the colors what should I do. By the way I have govee led lights.
How do you replace the whole strip? My adeshice got dirty and I was thinking of just trying to buy a new strip but I don’t want to throw away the battery box that stills works 🙏
I saw the connectors on Amazon! I got my lights from Walmart, worst idea ever. I didn't have connects either, so I'm using a bunch of usbs. One of my strips were $20, and only 6.5 ft. There are ones on Amazon 16.6 feet, the same price.
So one half of my lights work great! But the other half does not turn on, the cable to connect it is twisted at the end of it, and I think that might be the problem, any suggestions or help?
My lights stoped working, but the problem is at the start, do you know where I can get a new starting piece so I can plug it in and just clip it into the strip?
Can anyone tell me where you would get the strip to use for the repair? I know they are cheap, but I see no sense in buying a whole new strip with the remote and all just to use about 8 inches of the strip for a repair. It's just the led strip I need. Thanks in advance
He lost and cut out a section...if she does so she will be a section short.... anser she asking can u buy small spripes for repair or add...no is anser have buy new one and use else where and kee0 but off that as u can not get little stripes to buy
Hi, I just bought my LED lights and they were working fine but when I woke up the next morning they weren’t on anymore and I tried switching off and disconnecting it but it doesn’t turn on. Tho when I touch the metal tiny dots for colour on the strip, the light in that area comes on with that colour and when I stop touching it the light goes off
Mine mess up in sets of 3, it’s also a black remote with black backgrounds for the lights (if that makes sense), it’s also all buttons for the remote. it’s on my wall too. some of the green and some of the blue is messed up for others
I don't know why would I do that cuz I had a cut a piece off I have a 100ft strip led lights and so I thought I could get it to light up the piece that was cut off the strip light I put it on the metal piece with the copper part orange piece and and half of the lights stopped working now messed it up.
I tried taking part of mine down to give a more chill vibe but the whole strip turned off and it won’t turn on because I think I ripped one of the wires
I have an issue with one of my led strips, when I connect the other two all colours including white work however on the second white all the colours work apart from white, why could this be?
this could take place because of the brandw because some brands led strips are very bad. or like other people you where putting them up and they got stuck to somthing like carpet or somthing furry or soft and when they tried to take the led strip off it broke off or they pulled it to hard and they multistrip rather broke or its just the brand go to amazon and buy a whole new led strip or just go to amazon and search up (led strip conecters) then once you do that you are going to have to find the right size for them alr?
@@OfficialCrispyChips contacted the manufacturer of the LED’s I purchased, turns out its a “common issue” He didn’t even bother replying to me where I should ship them back, they just gave me a refund... Probably cost them pennies to make and they sell it x6
I was trying to remove the tape on the one side of the led for the 90 degree turns since it was getting caught on my sheets and being ripped off and I accidentally cut two of the wires of the inside now one side is green the other blue. Hopefully I can return it.
please help just a small bit on my lights are different colors than the rest like when I click on the white its green but its almost in the middle of the strip what do I do
I put my lights up as a test to see if it would look good and I used a tack and I think I punctured the red wire because all the colors under the red column won't work and instead they turn green and only 3 lights turn red. can I fix that or no?:/
helppp my led lights started to flash whenever I turn it on so I decided to leave off for a few days but it still flashes. ( any color I put it on it does the same thing, mind u I had my led lights for months. PLEASE HELP ITS SCARY
well mine when i put it on purple one half of it is purple and the other half is red and same with some colors it could either be one half a different color or just one half is off.
Please help half of my led lights stoped working but the other half will turn on
Thats whats happening to me
@@snip3rtatexx436 same
Same here
@@snip3rtatexx436 do
u figure out what to do bc i need help
me too 😓
When I turn my leds to white there are 5 lights that go yellow and for some other colors they are different is there any fix without taking them off your wall
Same thing for me
i have the same issue
Did you find a way to fix it
Me as well
That happens to me too
omg thank you so much!! it worked! i ripped my lights as i was trying to fix them
How did u fix yours?
Me too, I also ripped them as they fell down
@@teresaarabou9392 how did you fixed it
Same with mine
Same I was painting my room and as I was taking it off it broke 😩. Thank you to person in the video!!
mine aren’t even out of the rolls yet, it fell off of my bed when I was moving them, one of three fell off and won’t work, the other two only work at a certain angle, I literally just got these for Christmas and my mum bought them, it took so much convincing for them, I don’t know what to do, oh jeez please help
Same.
Thank you so much for all the help I would putting the connector on the wrong way thank you
Now that's the profile for MEEE
I cut my led lights and connected it and when I change it to green one part is green and the other is blue I can't just put it all to green
Same
I can’t put all blue, the faulty section will only do green lol
hmmm, this sounds strange! have you checked closely that the pins match up correctly and are not touching each other or crossed over?
@@InstyleLED thanks it's fixed now
Mohamed Gamer how'd u fix it? i had the same problem
What is that product you use to connect?
Go onto amazon or ebay, and search for 'led strip connector' you then need to find the right size for your strip
so if you have white it will only be 2 pins. BUT you can have white at 8mm, 10mm or 12mm so measure your strip width first!
Then you have RGB which will be 4 pins (RGB and +) again there are either 10mm or 12mm for this tyoe so measure first
Then you have RGBW which will be 5 pins (RGBW and +) again there are either 10mm or 12mm for this type so measure first
You can increase youe search term detail, by saying something like 'RGBW LED strip connector'
or 'white LED strip connector'
There are also connectors that have leads on them so you can wire into a power supply. Or cables that have a leads so you can go around corners!
my green light isn't working on all the leds exept the starting part... i suppose it is the part you replaced in this video that is broken but how do I replace the fist one??
sooo the part of where you connect the strip to the adapter ripped off connecting for the colours. how do i repair the wires?
Same how do I fixed ittt
I’m crying bro
Samee 😭
I’m about to
same bro my dad broke mine
same bruh
I bent the one of the metal parts on the 12v connector on the actual led light strip. What do I do?
same
my LED lights haven’t been used for 2 weeks, and the only colour showing when plugged in is a very faint blue, do you know how or if i could fix this?
That sounds like an issue with the power supply if anything
What happens if it works up until a certain point then stops for the rest? It worked just fine until it was bent in a certain area, now the red channel from that section and onwards does not work
I have the same problem :/
Same, at first it was only green working but now I have green/ red colours but still no blue
How would I repair the strip if I damaged it about 10cm from the start?
i have 9 sections where blue doesn't work and 1 section where red doesn't work. i have many replacement strip sections but wanna see if i can fix them. if i push on the resistor on the faulty strip with a screwdriver or wire it comes back on and works fine. I hear this is because of a dry solder joint, is there a video showing how to fix these?
L bozo
When I was installing mine they just ripped-
Sane
Mine to idk how to fix them
Same
same -_-
The LED strip just came apart? That sounds crazy! Maybe the PCB is super thin? I would contact your supplier as that shouldn't be happening!
My blue stopped working on 3 sections on 2 strips after a couple of months on my wall
What do you do if you have the kind covered in epoxy? Is there a way to put the epoxy back on after soldering?
i just bought led lights for my first time and i was so happy but then only half the things works, i really hope this vid helps or else imma be sad until tomorrow
what can you do if the first two sections are working but the rest of the led strips are not?
I seriously don't know. It's not in the video?
Buy another reel! Im just throwing 8 reels out as every one has faulty sections
Mine is cut through the cut point can I solder those back together? I don’t have replacement LED strip. And that tape clamp you have won’t fit in my application.
Hi just wondering if i had a 5m long 5volt at 2amps how do you work out how much power does it use on a 12volt system is it 10watts per hour or is it 50watts per hour? Any help would be much appreciated thanks.
Einstein died years ago mate no one else can or could help u there
Hi would you know why I am only getting blue from my strip? I get nothing when connected correctly but in revers pols blue only and the controler is non responsive.
Hello, tried it with my strips but the cut end just lights up in white. I tried to connect two 5m strips together this way, and the other doesn't light up.
Please help. The small pointy things that connect them together have all fell off. I dont know what to do and i only just got them for my bday. Is there a solution to this??
Where do you get the little adapters from to connect the led lights when you cut them?
Amazon
when i put my lights to purple some are red and some are purple so idk what to do
Same here
I have the same problem. It seems there is a small hole that might me messing up the code.
Same. I think the blue cut out on the part of the strip for mine
So I have to take them completely down and then re put them up?
im installing mine now and when I was attempting to use a corner connector to change the direction the three lights before the connector stopped working please helpppp
I bought the most expensive ones so they last. now they're up on my ceeling where i can barely reach em and 3 of the led dots just completely ignore the colour green. but when i press fade of jump it gets worse and they show different colours then they're supposed to. wtf am i supposed to do now? how do i fix that?
is there any way I can get more connectors????
I need help pls when I turn on my lee lights some are green even thought I put it to blue
I had got some baybetter led lights and I cut along the very first copper dotted line and none of them will turn on now how do I fix it ?
I could use your help. I purchased 5 sets for a studio. The design om the on off to USB is a horrible design. It starts with the button but the cord is super short, then there is a longer one of course for the USB. Problem is My studio desk is big and I need more lengthen the wite of the button side a foot or so, so I can drill a hole and be able to reach the button. Can I do this and if show should I not use line from tje USB side as that is more splicing but get what type of wire to add 12" or 16" max after button so I can place the button within reason? THANKS I subscribed!!
I have an issue we’re my red color is weak and red comes up as yellow and purple is white. I cannot find a single video on this kind of issue
same, I'm pretty sure it has something to do with the connectors
There is one faulty section of my LEDs and they are affecting the rest of them. When I press red the lights turn blue and the faulty section either doenst work or turns green. When I press blue the lights turn red. How would I fix this. I really dont want to have to buy a whole new set of lights
How do i get another strip of led lights to attach where the faulty part was
Can you use these connectors on the silver connectors
hello i just recently ripped of 1 pin out of my led lights, is there anything i can do ?
Only half of my lights turn on ;-;
Same
Same
There’s a billion of these. This is the first video that pops up. There is not a single video on how to fix the BEGINNING SECTION of a strip. I have no faith in humanity.
Same
I already installed mine and they worked fine for a few days until a section of them started turning a different light like when I put white that section is green and it does this for al the colors what should I do. By the way I have govee led lights.
My led lights is nt straight up opening, when I plug it in it doesn't light up been having the problem for 2 months now.
How do i fix the thing where its white and connects the strip with the 3 black things or is it not fixible
How do you replace the whole strip? My adeshice got dirty and I was thinking of just trying to buy a new strip but I don’t want to throw away the battery box that stills works 🙏
Hi! Please respond I would really like to know. If I cut my LED Lights, I have to get the connectors to make both pieces work?
yes you'll need connectors.
Where can i buy that connector ? :(
I saw the connectors on Amazon! I got my lights from Walmart, worst idea ever. I didn't have connects either, so I'm using a bunch of usbs. One of my strips were $20, and only 6.5 ft. There are ones on Amazon 16.6 feet, the same price.
What is the thing you are putting on led lights to connect 4:08
So one half of my lights work great! But the other half does not turn on, the cable to connect it is twisted at the end of it, and I think that might be the problem, any suggestions or help?
Please tel me if it worked my led has the. Same problem
Mine only about 5 work the rest don't. How do I fix this 😥
Where do I find the parts that you talked about in USA?
My lights stoped working, but the problem is at the start, do you know where I can get a new starting piece so I can plug it in and just clip it into the strip?
three of my led lights are different then all of the other ones what do i do?
Hey do you know how to fix like pink looking white couse i have a simulated white and idk why it looks like that 👀
hey i need help so i got my led lights but the beginning of the strip broke like the connection so i wanna know how to fix it
Mines does that ne’er the point where u cut but it lights up in the wrong colour
the blue light on half of the strip is not lighting iwth enough brightness. it comes and goes.
is it fixable ?
my wire got knocked and the connector piece snapped off from the lights. can i fix it?
Can anyone tell me where you would get the strip to use for the repair? I know they are cheap, but I see no sense in buying a whole new strip with the remote and all just to use about 8 inches of the strip for a repair. It's just the led strip I need. Thanks in advance
Just do it ur self, not hard at all, use what he used.
He lost and cut out a section...if she does so she will be a section short.... anser she asking can u buy small spripes for repair or add...no is anser have buy new one and use else where and kee0 but off that as u can not get little stripes to buy
Do you know how to fix it if its like riped alittle bit
Hi, I just bought my LED lights and they were working fine but when I woke up the next morning they weren’t on anymore and I tried switching off and disconnecting it but it doesn’t turn on. Tho when I touch the metal tiny dots for colour on the strip, the light in that area comes on with that colour and when I stop touching it the light goes off
Idk if it’s because I cut it to shorten it (on the manual, it says I can cut it and there’s a scissor drawing on the copper part)
Mine mess up in sets of 3, it’s also a black remote with black backgrounds for the lights (if that makes sense), it’s also all buttons for the remote. it’s on my wall too. some of the green and some of the blue is messed up for others
I don't know why would I do that cuz I had a cut a piece off I have a 100ft strip led lights and so I thought I could get it to light up the piece that was cut off the strip light I put it on the metal piece with the copper part orange piece and and half of the lights stopped working now messed it up.
Where did u get that piece from
I tried taking part of mine down to give a more chill vibe but the whole strip turned off and it won’t turn on because I think I ripped one of the wires
Hi one of my led strips is a different colour I tried to fix it
Same
the green and only the green is not working on my LED strip that's two meters long, any theories on how to repair?
We’re can I buy those connections
Where can I buy a short length of strip to make the repair?
my cat was messing with them and now the color is changed
is there a fix for this?
The begin point of my led is broken (3 leds) and only my blue light works how do i fix this?
where did he buy the little one things ??
I was installing one of my led lights and was moving on to the other one but when I turned it on the other one didn't light up ??
Mine are already on the wall and as I press on any of the blue or green colours, about 4 of the lights are a different colour. I’m so confused 🤷♀️
That means either your red, blue, or green light is out on those 4 lights and there isnt really a fix for that
I have to turn off my room light to see if the led is lighting and if i move may fingers across the led it brights a little bit better
I have an issue with one of my led strips, when I connect the other two all colours including white work however on the second white all the colours work apart from white, why could this be?
this could take place because of the brandw because some brands led strips are very bad. or like other people you where putting them up and they got stuck to somthing like carpet or somthing furry or soft and when they tried to take the led strip off it broke off or they pulled it to hard and they multistrip rather broke or its just the brand go to amazon and buy a whole new led strip or just go to amazon and search up (led strip conecters) then once you do that you are going to have to find the right size for them alr?
@@OfficialCrispyChips contacted the manufacturer of the LED’s I purchased, turns out its a “common issue” He didn’t even bother replying to me where I should ship them back, they just gave me a refund... Probably cost them pennies to make and they sell it x6
I actually cut mine what do u do to fix it
My entire strip doesn't work but when i put pressure on a light the section comes on but very dim
You ever find a fix for this?
Please give me a link to the contented thing please
My LED lights don’t turn on unless I touch the little metal things beside the bulbs ;-; what do I do???
Sameee
Mine ripped and I tried connecting it the way you did but the half that was not ripped only flashed and the other side did not work
if i put my led lights around my room and cut it and put it under my bed, it will still work right?
no duh
only if u get a plug in and a extension
I was trying to remove the tape on the one side of the led for the 90 degree turns since it was getting caught on my sheets and being ripped off and I accidentally cut two of the wires of the inside now one side is green the other blue. Hopefully I can return it.
SAME :/
i dont have an exta section of an led strip, can I remove the brokecn section and replace it with a connector?
Did this work as I've ordered the connectors so hopefully 🤞
@@birdkill18 i got two 5 meter strips, but one of them wasn’t working. sadly, i didn’t do anything, lemme know if your’s will work
please help just a small bit on my lights are different colors than the rest like when I click on the white its green but its almost in the middle of the strip what do I do
like the video much
Thanks Mary!
i had mine for a while and it bent and the rubber part snapped so i have to push down for it to work
Where do I get these?
I put my lights up as a test to see if it would look good and I used a tack and I think I punctured the red wire because all the colors under the red column won't work and instead they turn green and only 3 lights turn red. can I fix that or no?:/
you can you might just have to cut the strips off and get conecters to go with them or buy a whole new pair
How do u fix a weak color because my red is weak ?
My led light strip won’t go to blue,pink,purple,and white. I don’t know what happened
my best friend broke them but I didn’t wanted to get mad at them so I’m stuck alone with broken led lights help
Ok so my led light strips are not working after I accidentally plugged them in wrong how do I fix it?
same did you fix it somehow ? 😭
Where do I get the tape to tape connectors???
how do you fix it when it won't work after a thunderstorm
only a little bit of my light turns green and the green won’t turn off when i change colors it’s really annoying
Same w mine but w red
So helpful thank you!
Thanks for watching and commenting! Means so much to us, thanks!
@@InstyleLEDsyd
helppp my led lights started to flash whenever I turn it on so I decided to leave off for a few days but it still flashes. ( any color I put it on it does the same thing, mind u I had my led lights for months. PLEASE HELP ITS SCARY
Mine only work when I touch them on the silver thingy
that happened to mine too. have you figured out how to fix it? if so please respond to my comment.
@@laurengabrera8083 yes, where the wires connect (the spiky thing) you just flip it around and connect it again... Sorry I can't explain in words
@@sihlezwane6910 thank you so much. but i tried it and it didn’t work
@@laurengabrera8083 did you figure it out mine don’t work.
@@mahnoorkhan4091 no i didn’t, i’m planning on getting new ones instead. sorry!
well mine when i put it on purple one half of it is purple and the other half is red and same with some colors it could either be one half a different color or just one half is off.
My led strip broke between the connection points, I'm guessing this means I've now got over 10 ft of led lights that are now usable