literally just completed this repair. thank you for this. i ordered the shutter on ebay for US$130 and reapir took around 1.5 hours. much more economical and faster than a repair from sony or switching cameras
Thank you very much for this video, I followed your directions and was able to save lots of money by just buying the shutter assembly. I placed each screw on a piece of tape sticky side up in the order of removal and that helped quite a bit. The ribbon cables definitely need patience and care if it's your first time like me.
Very good video, I was able to replace my shutter on the A7RIII without issue. Saved me $400 and sending it off in the mail. This fixed the shutter being stuck in the down position and the camera error message.
Wow.. I didn't know it was this easy to remove the 1st cover where you can see the board.. My A7riii has a damaged slot 1 so I think will just buy a new card slot and then replace it by my own.. I have an electronic background but i haven't repaired something for about a decade because i shifted career so this one is very helpful. Cheers sir!.
Anyone can replace items in modern cameras. Just like mac computers. The only go one way. Not easy to mess up. Don’t be discouraged and stop paying $100s if you can do it yourself. Hardest part are the flex cables but once you know how to properly disconnect them you are golden.
What the piece called that you are holding at 1:16 . Something broke off and now I’m not able to attach my gimbal or stand, because it’s almost wedged it
Thanks soo much for your very professional work🙏 I have a question, is it hard to replace the front cover of the camera? As mine is slightly broken, the audio flap or if I can simply swap in the audio flap without taking it to pieces. Looking forward to read from you
What an excellent job. My only slight criticism would be that you blew into the camera with your breath and not using a aerosol airline Incredible job, though really impressed with that
Just finished but it didn't turn back on, guess I didn't correctly do one connector 😭 Edit: Was one simple connector, working now, thank you so much for the video! Now I have a full spectrum A7III
You are a talented guy. I had a stuck shutter. I took it apart and moved the shutter. It seems stiff. Everything is still in a plastic container. How much would you charge me to have a look at it, give me your opinion and put it back together. It might need a new shutter.
I have a question, I want to get to the Multi Controller Navigation Joystick Button. My original came out during an event party. It still functions well but I want to install it back. I've already ordered the part from ebay. How do I get to it?
I broke the glass on my a7rii viewfinder housing, not the viewfinder, the viewfinder still works but the glass is broken. Can that glass be replaced without having to replace the entire viewfinder?
Hi Saif l need your help l have Sony A7s the problem is has line in the meddle of the screen when turns on just wonder any suggestions and also it’s not reading the memory card thanks
Flying an FPV drone. Is it a very difficult task to keep the IBIS of the a7s3 from moving? Is there any way to fix IBIS without disassembling it? If I shoot the camera without the sensor inside it with a silicone gun without disassembling it, will the IBIS be fixed and the camera work? I'd like to find the simplest idea to fix IBIS without disassembling it! FX6 without IBIS is too expensive!
Thank you so much for this video! I have a problem with my camera! the shutter is stuck with the error message " turn the power off then on" when i turn on the camera there is a very loud noise! the sound come out of the shutter drive motor i think, and the shutter still close. is this the shutter or the motor drive?
the button that you push down to open the sd card slot stopped working when I dropped my camera, do you know any way to open it without taking apart the entire camera?
Can you tel me how you change the mount of the eyecup? It looks that it is attached to the back of the camera. Can it be replaced independetly of the camrea?
Do you have a video on how to replace the Bd Battery Lock, -that blue lever that keeps the battery in? Please post that video so I can fix mine. PLEASE!!!!!!
I opened my sony a77 after almost a year and it turned on then alpha logo showed and i had to set location and time zone , everything seems to be fine but after a few seconds it shut down and won't turn on,,i kept my camera without battery in a airtight box with some silica gel,, charged battery fully before using it,but it shut down and wont turning on,,when i turn on switch some red light is popping beside card slot and there is no information in display,,what could be the problem?
Hi, I'm looking for the usb multi port for this camera. It's a 15 pin usb proprietary port which I can't find anywhere. Any idea where to source parts for this camera? Thanks for sharing.
Hi, Jack K. Thanks for watching and drop a comment in my video. What if i give you part number for the USB multi port and you can try to order the part from nearest Sony service center in your place. Anyway, may i know where are you from?
I just bought it second hand and it has 73k count it is still a good condition for 3-4 years ? I only photograph for hobby ... meanwhile the original owner use it for work maybe that why the shutter is high
Useful guide. Done the job but count shows old total. I'd expected that the camera would sense a new unit and show 0 or the count would be in the new part. Obviously you can't normally reset the count.
Kak kerja di servis center mana ya? Kamera ilce-7rm3a tidak tajam hasil nya.. dibagian kanan & kiri terasa blur.. saya tes dengan bukaan f4 sampai -f7 masih tidak bisa tajam,saya coba lensa dan setingan sama di a7iii dan hasilnya normal.. apakah sensornya yg bermasalah?
HI, I`m from brazil and couldn't find any help in y city. I need to replace the SD slot. I found it online to buy but, do i have to tear it donw open in order to replace it? pleeeease help me
That's a good question. I would say that it doesn't reset shutter count since that value is likely stored with the mainboard memory. It's possible that there is a small IC on the shutter assembly keeping track of the count but that's unlikely. Maybe someone who knows will chime in.
I own a Sony a7r VI with a Sony 24-70 gm lens. Why is it that when I use AF-C to shoot. The camera lags a bit when I want to rapid shoot on single shot option? I tried everything from changing around the settings but it only made a slight difference on the speed performance. I even switched sd cards and nothing. I tested my lens with Sony and it's fine. I have the latest firmware and nothing...... Can anyone help me please 🙏
I don't think you'll find an answer here, this is a repair topic, not a software configuration help thread. Probably r/askphotography or r/sonyalpha can help you.
Hi Sailful! i remplace the motherboard of my sony alpha a7iii, buy now the autofocus is not working fine, do you know if it needs a programation to pair the image sensor and the motherboard?
I'm a little worried about the shutter speed of 4000 in 4k with my Sony zve10 I use camera for videos and I use 4000 shutter speed in daylight Can it do any damages to shutter ? Or effect the camera life I mean something is moving 4 thousand times in one second that's why I'm worried about it
My friend brought my camera for a day And I'm worried that he might dropped it or used my camera in dust, moisturizer How do i check my camera if it's ok or not It's working fine but I'm worried about any long term effects
Maaf mas kalau berkenan saya mau nanya. Problem kamera a7iii saya pas baru nyala sensornya kaya drop jatuh gitu terus camera error. Masalahnya udah 2x ke sony center gitu lagi mas problemnya, ada bunyi bunyi juga. Problemnya di ibis kah atau gimana ya mas ? Terimakasih 🙏🏻
selamat malam mas, mau tanya untuk kamera sony a7iii IBIS terkadang shake padahal udah di set auto dan menggunakan lensa bawaan sony, apakah memang begitu, atau emang ada cacat di produksinya ya ? oiya kalo misal ada kerusakan, total biaya berapa ya untuk menggantinya ? terimakasih :))
Hi.. do you have an e-mail address? I would like to show you a part of my A7r iii that got scratched but I do not know its name. Would that be alright?
Everything is fine until you take high-speed shots and the shutter-curtain synchronization adjustment is not made and the photographs come out in black or with black bands or lower or higher light. If you do not explain that a software adjustment is necessary and that the adjustment software is not available, then I have a camera that cannot be used in high speed mode and I have lost the cost of the replacement and the time spent repairing it because a camera like this It cannot be delivered to a client or friend. ¿Why don't you indicate how to make a shutter synchronization adjustment? or that an adjustment station is needed.
literally just completed this repair. thank you for this. i ordered the shutter on ebay for US$130 and reapir took around 1.5 hours. much more economical and faster than a repair from sony or switching cameras
Did you not have to recalibrate ?
Do you have a link or part number? Trying to find the right one when there's a variety of them listed on eBay
This camera has more screws than you can take pictures before the shutter fails :D
Thanks John Smith for the comment.
Please give Like and subscribe to my channel
Check out my other video also. Once again thanks so much. : )
Thank you very much for this video, I followed your directions and was able to save lots of money by just buying the shutter assembly. I placed each screw on a piece of tape sticky side up in the order of removal and that helped quite a bit. The ribbon cables definitely need patience and care if it's your first time like me.
Very good video, I was able to replace my shutter on the A7RIII without issue. Saved me $400 and sending it off in the mail. This fixed the shutter being stuck in the down position and the camera error message.
where did you buy the actual parts for the shutter?
Did you have to glue hack the rubber grip?
@@jxy5484 nah, I just put the grip right back on, no new pads or anything. Sticks fine and I haven't had any issues with it.
Where did you purchased the shutter replacement? and how much? Thanks!
Wow..
I didn't know it was this easy to remove the 1st cover where you can see the board..
My A7riii has a damaged slot 1 so I think will just buy a new card slot and then replace it by my own..
I have an electronic background but i haven't repaired something for about a decade because i shifted career so this one is very helpful.
Cheers sir!.
I just replaced FullBack Screen on my ILCE-7M3 camera. thanks to you for your help finding all the screws for me Loi
Fantastic video, just followed along to it replacing my own shutter and the guidance was excellent!
Thank you so much for this video. Absolutely clear step-by-step instructions.
Anyone can replace items in modern cameras. Just like mac computers. The only go one way. Not easy to mess up. Don’t be discouraged and stop paying $100s if you can do it yourself. Hardest part are the flex cables but once you know how to properly disconnect them you are golden.
What the piece called that you are holding at 1:16 . Something broke off and now I’m not able to attach my gimbal or stand, because it’s almost wedged it
Thanks soo much for your very professional work🙏 I have a question, is it hard to replace the front cover of the camera? As mine is slightly broken, the audio flap or if I can simply swap in the audio flap without taking it to pieces. Looking forward to read from you
I meant the mic flap attached to the front part of the camera
What an excellent job. My only slight criticism would be that you blew into the camera with your breath and not using a aerosol airline Incredible job, though really impressed with that
When shutter replaced does this also reset shutter count on camera?
Hello u need software adjustment the alighn or just replace and just it?
Did you not need to glue the texture/rubber piece on the grip at 22:27? Thanks for the great detailed video BTW!
Hello, have you any ideas for the glue ? Thanks 😊
Thank you! A few sources say the shutter has to be calibrated with special software. Is this true?
HI, for change the analogic joystic i have to remove all or i can put it by outside.
Just finished but it didn't turn back on, guess I didn't correctly do one connector 😭 Edit: Was one simple connector, working now, thank you so much for the video! Now I have a full spectrum A7III
You are a talented guy. I had a stuck shutter. I took it apart and moved the shutter. It seems stiff. Everything is still in a plastic container. How much would you charge me to have a look at it, give me your opinion and put it back together. It might need a new shutter.
My contact pin on my ILCE-7 is stuck, do you have any advice on how should I replace it with the least amount of dissambly?
Did you have to perform a calibration after you replaced the shutter? Some of the eBay sellers are saying it's needed after replacement.
Welldone friend,please my SONYA7iii lcd is broken place how can i
Replace it
I have a question, I want to get to the Multi Controller Navigation Joystick Button. My original came out during an event party. It still functions well but I want to install it back. I've already ordered the part from ebay. How do I get to it?
Thanks for showing this. What a lot of screws and delicate connectors. Someone will be pleased to get their camera back.
om shutter unit a6000 belinya dimana ya?
I broke the glass on my a7rii viewfinder housing, not the viewfinder, the viewfinder still works but the glass is broken. Can that glass be replaced without having to replace the entire viewfinder?
Yes you can replace VF block assy.
Hi Saif l need your help l have Sony A7s the problem is has line in the meddle of the screen when turns on just wonder any suggestions and also it’s not reading the memory card thanks
is that shutter life ended ?
it could be repair camera if shutter life has ended?
Flying an FPV drone. Is it a very difficult task to keep the IBIS of the a7s3 from moving?
Is there any way to fix IBIS without disassembling it?
If I shoot the camera without the sensor inside it with a silicone gun without disassembling it, will the IBIS be fixed and the camera work?
I'd like to find the simplest idea to fix IBIS without disassembling it!
FX6 without IBIS is too expensive!
Hi ,very great and useful video . do you have the shutter assembly part number ?
My friend recently gave me a camera with hot pixels. Is this repair pretty easy to do? What parts usually have to be replaced to resolve this issue?
Thank you so much for this video!
I have a problem with my camera! the shutter is stuck with the error message " turn the power off then on" when i turn on the camera there is a very loud noise! the sound come out of the shutter drive motor i think, and the shutter still close.
is this the shutter or the motor drive?
According to you which mirrorless camera did you suggest
Hi i want change the shoes flash in my a73 can u help me ? Thnks
i thought dslr the one that have problem broken the shutter unit....but mirrorless also have same problem...should i buy it or not?
Saiful Anwar how many shots the SONY A7 III had .when
the curtains have broken ? Cheers
is the new shutter improved or the same shutter with defect?
Hi l have Sony 7s11 that has a line comes almost in the middle any ideas can l send it to you to fix it thanks
the button that you push down to open the sd card slot stopped working when I dropped my camera, do you know any way to open it without taking apart the entire camera?
Hello, excellent video. Do you know where I can buy the shutter unit for the Sony a 7 iii
Best option is ebay
would you know the size of the screws that are used on the bottom plate? ( where the tripod mount screw is )
3:00 tha back plate i improve it with nice aluminium with fins to improve disipation and can record 4K with no therma shutoff.
why not copper?
Can you tel me how you change the mount of the eyecup? It looks that it is attached to the back of the camera. Can it be replaced independetly of the camrea?
There’s two clips underneath too pull and it’ll come off
@@TresLucin I didn't mean the eyecup. I meant the eyecup holder. The metal part that holds the eyecup
@@horatiophotography6701 ahh I’ve never had the problem but it should be replaced independently, if it’s lose or popping off
Do you have a video on how to replace the Bd Battery Lock, -that blue lever that keeps the battery in? Please post that video so I can fix mine. PLEASE!!!!!!
Thanks for the video! Wondering if it's possible to change the mic port as a DIY job? What would be the part needed? Thank you!
Check ebay spare parts.
I opened my sony a77 after almost a year and it turned on then alpha logo showed and i had to set location and time zone , everything seems to be fine but after a few seconds it shut down and won't turn on,,i kept my camera without battery in a airtight box with some silica gel,, charged battery fully before using it,but it shut down and wont turning on,,when i turn on switch some red light is popping beside card slot and there is no information in display,,what could be the problem?
Can you replace a7iii shutter with a9 shutter?
WOW, that was great, well done indeed 👍
Hi l have sony 7sll
ll it's working but there is a line green one on the side can you help me thanks
Below the sensor there are few golden small pins wat to do if one of those has gone inside how to bring it back out
Hey, Great video. Can you replace a Sony a7iii camera? my camera has so many dead pixels in it.
Thanks brother, you saved me a few hundred bucks 🤙🤜🤛
Hi, thank you for this video. How long did you need to fix the camera?
Hi, I'm looking for the usb multi port for this camera. It's a 15 pin usb proprietary port which I can't find anywhere. Any idea where to source parts for this camera? Thanks for sharing.
Hi, Jack K. Thanks for watching and drop a comment in my video.
What if i give you part number for the USB multi port and you can try to order the part from nearest Sony service center in your place.
Anyway, may i know where are you from?
@@saifulanwar2522 I'm from ireland, part number would be great. It's a usb micro type-b 15 pin multifunction port. Next to usb c port.
@@Qban220 here is the P/N: 1-843-490-21.
By the way, may i know the reason why you need it? Is it damaged?
@@saifulanwar2522 yes it's mechanically damaged.
@@saifulanwar2522 Very much appreciate it, this socket was nearly impossible to find.
How about replacing low pass filter video have micro scratches ordered filter and would be greatful if you made a video
I just bought it second hand and it has 73k count it is still a good condition for 3-4 years ? I only photograph for hobby ... meanwhile the original owner use it for work maybe that why the shutter is high
200 000 is a possible life expectancy.
Hi sir my sigma lens stucked on body how to remove & how much charges
how much does it cost replacing the shutter unit?
Where can i get the motherboard/bba for a7iii camera my camera will not turn on
Does that return the shutter count to 0?
Useful guide. Done the job but count shows old total. I'd expected that the camera would sense a new unit and show 0 or the count would be in the new part. Obviously you can't normally reset the count.
You need to send it to Sony for recalibration if yo want it to show 0. One hour labour plus postage(uk)
Kak kerja di servis center mana ya? Kamera ilce-7rm3a tidak tajam hasil nya.. dibagian kanan & kiri terasa blur.. saya tes dengan bukaan f4 sampai -f7 masih tidak bisa tajam,saya coba lensa dan setingan sama di a7iii dan hasilnya normal.. apakah sensornya yg bermasalah?
Where to buy the screwdriver/tools?
HI, I`m from brazil and couldn't find any help in y city. I need to replace the SD slot. I found it online to buy but, do i have to tear it donw open in order to replace it? pleeeease help me
does this replacement affect the shutter count? is it reseted or continued?
That's a good question. I would say that it doesn't reset shutter count since that value is likely stored with the mainboard memory. It's possible that there is a small IC on the shutter assembly keeping track of the count but that's unlikely. Maybe someone who knows will chime in.
Can I send you my a7ii ??
where do you get the replacement shutter unit from?
www.ebay.com/itm/For-Sony-A7-III-ILCE-7M3-shutter-set-Blade-assembly-repair-parts/123792021298?hash=item1cd2945732%3Ag%3At~kAAOSwzfNc9jo-&fbclid=IwAR0kfkIvOjorEFTcvBcqoChTb3vFxc6P76POaRl_3dNDAvEf-keKymMTqoE
I own a Sony a7r VI with a Sony 24-70 gm lens. Why is it that when I use AF-C to shoot. The camera lags a bit when I want to rapid shoot on single shot option?
I tried everything from changing around the settings but it only made a slight difference on the speed performance. I even switched sd cards and nothing. I tested my lens with Sony and it's fine. I have the latest firmware and nothing......
Can anyone help me please 🙏
I don't think you'll find an answer here, this is a repair topic, not a software configuration help thread. Probably r/askphotography or r/sonyalpha can help you.
Hi Sailful! i remplace the motherboard of my sony alpha a7iii, buy now the autofocus is not working fine, do you know if it needs a programation to pair the image sensor and the motherboard?
Did you ever figure it out?
@@mq4oneseventyeight567 yes
I'm a little worried about the shutter speed of 4000 in 4k with my Sony zve10
I use camera for videos and I use 4000 shutter speed in daylight
Can it do any damages to shutter ?
Or effect the camera life
I mean something is moving 4 thousand times in one second that's why I'm worried about it
When you do video, the camera doesn't use the shutter.
What cost in repair the shutter?
CAN WE GET ONE ON THE A7IV?? fml
how did you get the part?
Ada iG tak boss ? nak tanya something
is shutter unit shaking is a problem or not?
Its normal,IBIS
Hello Anwar, the problem with my camera is that focus get F-- sometimes
is it a easy fix or a big problem? sometimes works fine
Hallo mas saiful anwar, terima jasa perbaiki kamera enggak?
My friend brought my camera for a day
And I'm worried that he might dropped it or used my camera in dust, moisturizer
How do i check my camera if it's ok or not
It's working fine but I'm worried about any long term effects
i bought my used sony a7lll and it only has 10 megapixels how do i get it back to 24.3 megapixels?
I think its in crop mode and you need to switch it back to full frame.If not the case then there is a problem
great video. please include a POV angle maybe a gopro?
Maaf mas kalau berkenan saya mau nanya. Problem kamera a7iii saya pas baru nyala sensornya kaya drop jatuh gitu terus camera error. Masalahnya udah 2x ke sony center gitu lagi mas problemnya, ada bunyi bunyi juga. Problemnya di ibis kah atau gimana ya mas ? Terimakasih 🙏🏻
What’s the cost of this exact repair?
500 - 650 $
Many thanks for the video!
informative videos good job ...
selamat malam mas, mau tanya untuk kamera sony a7iii IBIS terkadang shake padahal udah di set auto dan menggunakan lensa bawaan sony, apakah memang begitu, atau emang ada cacat di produksinya ya ? oiya kalo misal ada kerusakan, total biaya berapa ya untuk menggantinya ? terimakasih :))
Good luck taking that apart and not losing screws, do not attempt this unless you are confident, those fragile ribbon cables are easily broken.
Those connectors are horrible. I've removed the IR filter and I'm assembling it back together but those connectors are driving me insane
Great skills, this work look like an brain oparation 🤯
Hello, can you confirm if the Mainboard of the A7R III and A7 III are the same? Thanks
Amazing skill...
Price pls?
how much it cost?
Dang, nice work!!!
Hi.. do you have an e-mail address? I would like to show you a part of my A7r iii that got scratched but I do not know its name. Would that be alright?
wow nice work!
Everything is fine until you take high-speed shots and the shutter-curtain synchronization adjustment is not made and the photographs come out in black or with black bands or lower or higher light. If you do not explain that a software adjustment is necessary and that the adjustment software is not available, then I have a camera that cannot be used in high speed mode and I have lost the cost of the replacement and the time spent repairing it because a camera like this It cannot be delivered to a client or friend.
¿Why don't you indicate how to make a shutter synchronization adjustment? or that an adjustment station is needed.
I have same camera and this is the most painful thing I watched today
ojo suwi suwi pidione.....hehehe...pidione gawe sek akeh
Oke siyaaaap
@@saifulanwar2522 mantap
ndi kie pidio ne sek liyo...youtubere y kudu sering upload
@@nurliya2402 iseh proses editing
sedino haruse 4 pidio
Sir apse baat karni hai..
wes 200x ditonton
Mantap
@@orangdesa8130 jossss
Thank you