I'm a one man shop working for a town fire department. I've used Insite for a long time and never had the nerve to reprogram an ECM since it's not really as easy as Ford. Thanks for the step by step, I just recalled an L9 that had been giving codes that a TSB said an update would fix. You're the best!
At 3:15 you missed that step in the USA what are we supposed to select? Or what is it supposed to be? Thanks also is an image just a snap shot - I thought it was a recording to watch after a road test.
Trying to get into this industry since I’m in the IT field and I’m surrounded with commercial trucks. Are most programs universal for every truck or to each their own?
Hi sir do have a 2017 kenworth T680 which is governed at 64mph and can’t be changed due the greenhouse gas system.Do you by chance have any idea about it.
Hey I need help in the parameters when I crank the truck the sensor camshaft speed rpm doesn't run and the crankshaft sensor go up two 200rpm the truck doesn't start
i liked this video thanks .i has a question see any way you can help 2012 cummin isx 15 has fail to install actuator after fail is show faulty code 6 any idea ?
HELP IS IT POSSIBLE FOR ME TO WIPE CLEAN MY ECM? ROM REBOOT? Had a glitch ECM won't talk through insite now. There's no footprint now. Could I have done this?? Thanks for any information.
Is there any way for the average Joe (not a certified dealership technician) to get their hands on this equipment/software? I hear they hold it pretty close to their chest and charge an arm/leg for it. Specifically, I'm interested in changing a few of the features on my truck -- all tied into the ECM, obviously. But would rather have the software/equipment to do it myself instead of pay hundreds of dollars to a dealer every time I want to change something.
Great video! Very helpful. I work for a state transportation shop. We have the Insite Pro. Will we be able to do calibration updates? The calibration available screen has never popped up for anything that I have worked on. I also have access to cummins quickserve.
Yes you should be able to updates and if it needs one it would pop up but if not you can always check for one manually and quickserve is a great tool once you start using and getting familiar with it
Hey Brother I hope all has been well.... I have a 2021 freightliner cascadia automated Eaton trans with a cummins x15... ecm light has been on and truck progress through gears really slow. Would you think a ecm could possibly resolve issue? Also I'm in Atlanta... where are you located.... you really know your shit. Very cool
Do we need to purchase a master password Cummins to run ECM RECALIBRATION?? I have FC 3714 and only way to get that code to go inactive is to run recalibration. Help??
what if i buy an ECM that comes with a power generator calibration, but the ECM is the same as used for trucks. Can i just flash it with the truck calibration and use it on my truck?? the ECM PN is the same. Thank you
When you select an ecm at about 3:10 it won't let me click that where it says like "isl cm2350" or whatever I click it and get an error code. Any advice?
How do you get from clicking on the ecm number to "Open everything up"? You clock on the ecm number and the window opens up then it looks like you edited something because next the whole page is full?
If one has Incal files could they change the ecm file to a "different" file? Assuming the CPL is compatible. For Example, we do heavy hauling. If I find a file for an ISX that would give me a 50-100hp bump ( but the CPL is the same) so the internal engine components are the same, can I just pick it and go?
@@dirtydieselnation8826 you cant even get cummins to pick up the phone here. ive got zero chance in hell of the dealer pulling through for me. where is a friendly hacker when you need one? we do this shit with fords all the time, someones gotta have a way in......
Unfortunately for my company trucks I don't do the delete but if I get someone to come to me to do a delete ill post video thanks for subscribing im doing a video on a Ford 6.4 build with delete coming soon
You will have to check manually and if u watch my video it will explain what to do if the screen doesn't pop up but 9 times out of ten if it don't pop up u are running the newest calibration
Question. I'm having fault codes for both intake and outlet NOx sensors, relays and fuses are ok but the comluter it's telling me that ECM is not getting the return signal, I've tested it with a new sensor but still showing the fault codes. If anyone can help me out with that I would very much appreciate it. Thanks.
I'm a one man shop working for a town fire department. I've used Insite for a long time and never had the nerve to reprogram an ECM since it's not really as easy as Ford. Thanks for the step by step, I just recalled an L9 that had been giving codes that a TSB said an update would fix. You're the best!
Happy I could help
It’s very easy, just follow the steps
This video walked me through an update to fix a de-rated isl 9.0 today, literally in the mountains using a hotspot on my laptop! Thank you.
I'm glad I was able to help you
Detroit mechanic working on a Cummins, thanks for the confidence to take this on!
Happy to help good luck
Probably the third or fourth time I've needed a refresher and watched this video in 2 years. thanks man!
Your welcome glad I could help
Awesome new to the diesel trade this was very helpful
At 3:15 you missed that step in the USA what are we supposed to select? Or what is it supposed to be? Thanks also is an image just a snap shot - I thought it was a recording to watch after a road test.
What type of cabin have that truck? It's necessary update the cabin too?
Great video thanks for the help
Trying to get into this industry since I’m in the IT field and I’m surrounded with commercial trucks. Are most programs universal for every truck or to each their own?
U can get a so called universal program for them all but they are not as good and u can't do as much unlike specific programs for each engine
Hi sir do have a 2017 kenworth T680 which is governed at 64mph and can’t be changed due the greenhouse gas system.Do you by chance have any idea about it.
Hey I need help in the parameters when I crank the truck the sensor camshaft speed rpm doesn't run and the crankshaft sensor go up two 200rpm the truck doesn't start
Does ecm update increase fuel mileage? Pete 389 Cummins isx15 . Tia !
Hey bud once you hook up to the computer, do the computer tell you that u have to do an update? or you have to search for it ?
@@nramroop79 it should pop up after it connects to the truck
i liked this video thanks .i has a question see any way you can help
2012 cummin isx 15 has fail to install actuator after fail is show faulty code 6 any idea ?
Part # comes up but it says "INSITE could not detect calibration for the selected part " wth?
My calibration stoped halfway, any recommendations.
Great video, thank you
do you think my 2016 cummins ISX have calibrations that needs to be updated ?
thanks!
Most likely if u haven't had it done recently
What is cause of 1694 fault i already replace nox sensor still code shown. The bus can have continuity when ignition on a s that normal thank you
Thanks for the video! Very Helpful!!
Glad it was helpful!
Why does it say j1939 firmware not available? Mine says and I can't figure out if it needs to be available and if it does how I download it
Thankyou bro it helpme. So much..and fix the problem..
Glad I could help
Are you using the 9 pin connecor or the cummins 3 wire connector to connect to the ecm?
Yes the 9 pin
HELP IS IT POSSIBLE FOR ME TO WIPE CLEAN MY ECM? ROM REBOOT?
Had a glitch ECM won't talk through insite now. There's no footprint now. Could I have done this??
Thanks for any information.
Awesome video thanks 4 information every one else wants people to buy information 😀
Thanks for watching just try to help out normal people like myself get things done
@@dirtydieselnation8826 good deal man
If u do the update to a truck that has been deleted will this update will undelete and set everything back to what use to be from factory
Yes it will screw up the delete don't update a deleted truck
Is there any way for the average Joe (not a certified dealership technician) to get their hands on this equipment/software? I hear they hold it pretty close to their chest and charge an arm/leg for it.
Specifically, I'm interested in changing a few of the features on my truck -- all tied into the ECM, obviously. But would rather have the software/equipment to do it myself instead of pay hundreds of dollars to a dealer every time I want to change something.
Yes depending on what u want to change for parameter there other programs available to another software I use is jpro
Great video! Very helpful. I work for a state transportation shop. We have the Insite Pro. Will we be able to do calibration updates? The calibration available screen has never popped up for anything that I have worked on. I also have access to cummins quickserve.
Yes you should be able to updates and if it needs one it would pop up but if not you can always check for one manually and quickserve is a great tool once you start using and getting familiar with it
I tried it again today and it worked perfectly! Thanks again.
Welcome
Hey Brother I hope all has been well.... I have a 2021 freightliner cascadia automated Eaton trans with a cummins x15... ecm light has been on and truck progress through gears really slow. Would you think a ecm could possibly resolve issue? Also I'm in Atlanta... where are you located.... you really know your shit. Very cool
Do we need to purchase a master password Cummins to run ECM RECALIBRATION?? I have FC 3714 and only way to get that code to go inactive is to run recalibration. Help??
U will need to purchase a key from Cummins
What truck were you working on?
Freightliner
what if i buy an ECM that comes with a power generator calibration, but the ECM is the same as used for trucks.
Can i just flash it with the truck calibration and use it on my truck?? the ECM PN is the same.
Thank you
Honestly I've never tried it but I believe if it's the same ecm then yes u can flash it to the right calibration for your application
Do you need to create a work order for it to install? I have the file but seem to have an issue with it running
No you do not need to create a work order
@@dirtydieselnation8826 I can’t seem to get it to work ugh. I know I have the file and did exactly how you stated
When you select an ecm at about 3:10 it won't let me click that where it says like "isl cm2350" or whatever I click it and get an error code. Any advice?
If I understand correctly that's happened to me and I called support cause it happened cause a an error during a computer software update
@@dirtydieselnation8826 like I might need to update insite on the laptop or what ?
Yes and as long as your connected to internet u can update it and if that don't work let me know and I'll help look into it further for you
I am new comer in this field. I want to calibrate ECM Cummins engine QST30. Did you make any videos on this topic step by step
They are all relatively the same way
Excellent explanation 👌
Thank you glad I could help
how to program Cummins ISL common rail fuel injectors after replacement. CM2250 124B/ 130B
The save button for me is gray out. Which version are you using?
Then u already must have it saved to ur computer
How do you get from clicking on the ecm number to "Open everything up"? You clock on the ecm number and the window opens up then it looks like you edited something because next the whole page is full?
Once you click on the ecm code it pulls it up for you with the standard parameters for the ecm code you chose
@@dirtydieselnation8826 I will try again this coming week. Thanks
It is hard to get the license needed to use this software?
Its about $1500 for a 12 month license.
What does it mean when I hit "show installed calibrations" and 4 pop up ?
If I understand your question it should show u all the previous versions and the last one is the current version you have
Awsome bud. Thanks
If one has Incal files could they change the ecm file to a "different" file? Assuming the CPL is compatible. For Example, we do heavy hauling. If I find a file for an ISX that would give me a 50-100hp bump ( but the CPL is the same) so the internal engine components are the same, can I just pick it and go?
In most cases yes
ive got an isb 225 need flashed to 275 or 300. can you help?
You will need to get a fleet cal from Cummins
@@dirtydieselnation8826 you cant even get cummins to pick up the phone here. ive got zero chance in hell of the dealer pulling through for me. where is a friendly hacker when you need one? we do this shit with fords all the time, someones gotta have a way in......
There are people out there but they are getting harder and harder to find
Thanks!!
EGR +DPF delete tutorial?
Unfortunately for my company trucks I don't do the delete but if I get someone to come to me to do a delete ill post video thanks for subscribing im doing a video on a Ford 6.4 build with delete coming soon
Great video.. Thankyou.. I have a question, if I calibrate with different ecm part number by mistake, is possible the engine get broke?
No but it may not run or if it does run it my run rough
@@dirtydieselnation8826 I can't enter mine, what should I do?
What do u mean u can't enter mine
@@dirtydieselnation8826 Now my software can't get inside, need your help
@@dirtydieselnation8826 How can we talk to each other?

Nice video man. I wonder if you can tuneup the motor with this software. I mean like bump up the 550hp to 600 or somethinn
You can all You need to do is get in touch with Cummins and they can sell you the correct fleet cal its cost around 100 bucks really simple to do
Make sure you create a work summary just in case something goes bad.
Thanks for video, greatfull , I want to ask you , how can i upload the software or can i transfer the software from ecm to another ?
Are you saying upload software to the ecm and thanks for watching I hope I can help as many people as I can
@@dirtydieselnation8826 thanks alot for replying ,
Transfer software from ecm to laptop and from laptop to ecm , or from ecm to ecm ?
No you can't you need a fleet calibration from Cummins to upload to a ecm
@@dirtydieselnation8826 thank you very much
You are very welcome
Hi
I need download cummins software calibration cummins ecm
Hey great to watch your video . would u like to provide all details of fault code with discription please if u have
There was no codes just a Cummins ecm update
How do I check and see if the ecm has the latest calibration if the screen does not pop up?
You will have to check manually and if u watch my video it will explain what to do if the screen doesn't pop up but 9 times out of ten if it don't pop up u are running the newest calibration
@@dirtydieselnation8826 guess I missed that part. I'll look again.
If u can't figure it out let me know and I'll make a video tonight just specifically for that
What if I need to recalibrate due to def issues. Def showing full and empty. And in derate.
You can still do the recalibrate and let it reset but if the problem continues you will need to look into the issue causing it to act up
Really helpful thanks
Welcome
Thank you very much
What if insite doesnt connect to ecm? Error number: 5204. Tiy
Question. I'm having fault codes for both intake and outlet NOx sensors, relays and fuses are ok but the comluter it's telling me that ECM is not getting the return signal, I've tested it with a new sensor but still showing the fault codes. If anyone can help me out with that I would very much appreciate it. Thanks.
I would look into the harness
How do I upgrade from basic to pro?
Purchase thru Cummins
Thanks bro
what should we check when its shows one ecm is connected
You can check whatever you would like is there something you would like me to show you
Thanks Thanks Thanks 😊
sir If ECM got locked due to laptop battery how to reflash calibration...pls. reply urgent response requested
Go into ecm calibration and reflash the last calibration
Bhai jara explain kare laptop ki battery ki wajah se ecm kyu loc hota hai.7523829902 mera nu.hai. muze janana hai
Very good
👍🏻👏🏻👏🏻👏🏻
My need cummins calibration File
Very helpful! Thank you, worked perfectly!
Your welcome thanks for watching
Fuel consume low how to do this
What do you mean by that
@@dirtydieselnation8826 how to increase fuel average of Cummins engine
I from India
@@sonutech7110 is your Cummins before emissions
@@dirtydieselnation8826 what do you mean i say how to increase fuel efficiency Indian Cummins engine emissions 6
Hell yeah
I do what I can to help everyone
Привет как получить лицензия
Please do a video when it crashes and you need to get a fleet account talk about a fiasco.
👍
Hello sir I need this calibration file FL90003.00 pls sir
I do not send calibration files sorry
Как можно уменьшить окна в программе ?