Your videos are very helpful. The Kbar worked so well on my maiden that I thought it was already auto trimming. The instructions on the software and the site do not match for the auto trim. Your video cleared it up and I will try it out.
God I love that Heli. God you got such good taste in design Thomas. I got to watch how you hook and set up your kbar I am thinking about removing my beastx gyro and putting the yellow kbar back on.
Great work dude. I got mine to the auto-trim double pump of the swash then went to spool up - and had the heli spin counterclockwise like a top. Cyclic servos all working properly. Tail servo not binding and centered. Gyro gain at 75% in VStabi. Any ideas?
what's up wicked.i really need help setting up the kbar gold warrior from step 1.i have it on with green light.but servos do not react when you turn gyro.do i need to bind or something.please help me brother.Vince covina ca.
Wickedclown clown I got one question for ya bud? I have a problem with my helicopters all of them I am using kbar gyro for all of them , Everytime I spool them up to take off they tip over. I checked my swashplate and it's level so what could it be? do I need to hook up my gyros to a p.c. in order for them to work properly? I also have the bluetooth module that you plug into the gyro along with the app that doesn't work either because the settings don't lock in because when I pull the plug on the gyro the settings go away. I dunno Wickedclown I am stumped can you please help me? Will the P.C. software help my babies (Helicopters ) Please help me Wicked I am stumped and lost. Thanks. Wicked
wc great work my bro,to do a trim flight you need to take it up high on calm day let it drift hands of ,correct ,hands off ,try to keep your input to a min .Keep up the good work
Powering up with the throttle at high enters the ESC into programming mode. The next step is to go to low to start the programming sequence. I may be able to plug in the KBAR after the ESC comes on with the stick at low then transition to high but it will engage the blades.
lord hav mercy at the planes and helis flyin over head..sounded like ther was a whole dam fleet of the suckers lol..and they was gointa kik somebodys ass !! lol
This Kbar is a direct clone of the Mikado miniVBar that uses the proprietary Mikado firmware without permission. I understand that for the makers of these clone electronic this is business as usual, but for the Mikado folks who invest time, effort, and capital in the research and development to further technology, this is called intellectual theft.
Your videos are very helpful. The Kbar worked so well on my maiden that I thought it was already auto trimming. The instructions on the software and the site do not match for the auto trim. Your video cleared it up and I will try it out.
glad it helped you out
Thank you for your little inputs on the kbar!!
Wicked Clown you are the K bar Whisperer. Thanks for posts. Got me hooked up. will post a video soon of my first flight with your mention
lol thanis brother
when you throttle back to low stick all should be ok it will come out of programming automatically
I got the k-bar and you have gave Me really good into I appreciate it man
+rick k
cool rick ty
God I love that Heli. God you got such good taste in design
Thomas. I got to watch how you hook and set up your kbar I am thinking about removing
my beastx gyro and putting the yellow kbar back on.
love my kbar and vbar gyro's
Great work dude. I got mine to the auto-trim double pump of the swash then went to spool up - and had the heli spin counterclockwise like a top. Cyclic servos all working properly. Tail servo not binding and centered. Gyro gain at 75% in VStabi. Any ideas?
Wayne Morgan sounds like rudder servo is reversed.
what's up wicked.i really need help setting up the kbar gold warrior from step 1.i have it on with green light.but servos do not react when you turn gyro.do i need to bind or something.please help me brother.Vince covina ca.
vince godinez it needs to be hooked up to a receiver then bind.
Hey WC! Very nice instructional video bud. Thanks for sharing.
Wickedclown clown I got one question for ya bud?
I have a problem with my helicopters all of them I am using kbar gyro for all of them , Everytime I spool them
up to take off they tip over.
I checked my swashplate and it's level so what could it be?
do I need to hook up my gyros to a p.c. in order for them to work properly? I also have the bluetooth module that you plug into the gyro along with the app that doesn't work either because the settings don't lock in because
when I pull the plug on the gyro the settings go away.
I dunno Wickedclown I am
stumped can you please help me? Will the P.C. software help my babies (Helicopters )
Please help me Wicked I am stumped and lost.
Thanks. Wicked
Paul Santora you have to program them with the software. He has a great video on setup and how to do it.
Hey WC,
Where do you have your throttle curve set at during the Trim test??
Thanks
Tick Tock
normal 0 30 65 65 65
Thanks for that Tom, I'd love to get my Kbar setup properly on my 450, I'm sure this is going to help
wc great work my bro,to do a trim flight you need to take it up high on calm day let it drift hands of ,correct ,hands off ,try to keep your input to a min .Keep up the good work
dangit i might do it all over again your right
looking at the video i think i got it lol thank you
Kbar should make a 16 channel integrated universal receiver.
Going to full throttle on power up also activated my ESCs programming sequence. Any suggestions?
when you throttle back to low stick all should be ok it will come out of programming automatically
I am using an Align ESC and low throttle afterwards signals you are ready to use the throttle stick for programming the ESC options.
try it when you go to low stick it should be armed if i remember correctly
Powering up with the throttle at high enters the ESC into programming mode. The next step is to go to low to start the programming sequence.
I may be able to plug in the KBAR after the ESC comes on with the stick at low then transition to high but it will engage the blades.
dunno what to tell you words with my 450s but they are using castle esc high stick also takes them into programming
Thanks for sharing WC ...I will try.....and follow the steps.....like
What's the ch1 and ch2 ch3 and Rd on kbar
what state do you live in ?
Thanks for your Guy's help!!
Heli Brother Hood!
ken
you got my email last night ? congrats and good luck
lord hav mercy at the planes and helis flyin over head..sounded like ther was a whole dam fleet of the suckers lol..and they was gointa kik somebodys ass !! lol
YOU CAN SEE HOW YOU CONFIGURE 3D MODE IN THE RADIO
THANK YOU
Hey man , your eggs are boiled the timer said it LOL
nice work man , I got new wire plugs no sparks more woohoo
liked
KBAR Mini input voltage 3.5v to 8.4 volts
Thanks de aznprince I got it ✌
Good work, But this hobby is becoming too much work for me to be a hobby anymore
This Kbar is a direct clone of the Mikado miniVBar that uses the proprietary Mikado firmware without permission. I understand that for the makers of these clone electronic this is business as usual, but for the Mikado folks who invest time, effort, and capital in the research and development to further technology, this is called intellectual theft.