Hey do you time the power divider to the gear on the pinion? I have a used good shape diff from a parts truck im putting into another truck. I cant seem to find the old timing marks on the good used diff. I have the old timiming marks on the power divider for that same diff. The meritor service manual says to time it but i can't find the timing marks on the pinion gear that meshes with the power divider. any suggestions? Thank you, and thanks for your videos they help.
Hi Mr. I have a 2007 Freigthliner, Columbia, the 2nd axle is not engaging....and I need a Technician how's knows..and have experience..on this power divider....most off the Mecanics refuse to open it. Do you have Mecanic shop....To work on it.!? Please let me know..I ho around the States OTR...
My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced?
tighten bottom adjuster screw (clockwise) while loosening the top adjuster screw (counter clockwise) will make backlash smaller.. tighten top adjuster screw (clockwise) while loosening the bottom adjuster screw (counter clockwise) will make backlash bigger. ( backlash for new crown and pinion should be 0.010 to 0.012 play) (backlash for used crown and pinion) should be 0.012 to 0.015) i hope this is a little more easier to understand 😁
There are tread locks on the bolts, for crowns & diff case just wasn’t shown on the video cuz the transition on each clip was speed up or got cut off. Yah but i put the red tread loctite for all bolts and nuts especially the inner bolts of the differentials or transmissions. Thank you for watching and your comment. 👍🏼
I enjoy watching your videos!! You’re without a doubt a professional. Thanks again Elvin
Thank you for watching 🙏🏼
Nice work. Enjoy how you clean it up and make it brand new.
Thank you so much 😊
Hey man! I have that same Typhoon cleaner. Nice.
It’s old but cleans really good 👍🏼
Muito bem feito o serviço.
Hey do you time the power divider to the gear on the pinion? I have a used good shape diff from a parts truck im putting into another truck. I cant seem to find the old timing marks on the good used diff. I have the old timiming marks on the power divider for that same diff. The meritor service manual says to time it but i can't find the timing marks on the pinion gear that meshes with the power divider. any suggestions? Thank you, and thanks for your videos they help.
Hi Mr. I have a 2007 Freigthliner, Columbia, the 2nd axle is not engaging....and I need a Technician how's knows..and have experience..on this power divider....most off the Mecanics refuse to open it. Do you have Mecanic shop....To work on it.!?
Please let me know..I ho around the States OTR...
Yes i have a shop, i only rebuild diffs and trans. You need to take it to a mechanic to pull out the diff and bring it to my shop.
Hey man nice job
Where can I buy meritor diff rebuilt kits. For Volvo diffs?
My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced?
Nice VLOG cousin😍THANKS for sharing💖🙇♀️
Eto alala ko nun. Favorite ko grind yung gears nyan nun.
Haha oo tol, yan yung expert mo pag buo nung diff case kayo dalawa ni Alex, Mascot days nakaka miss din hehe ☺️
@@maximumpowertrain1433 tama hehe ang namiss ko din yung mga opm na tinutugtog natin.
@@FilipinoToyCollectorsWorlwide yung mga dance showdown tol 😂
What is the difference in RD20145 and RDL20145?
RDL has a diff lock
Is there a simple explanation for the backlash set up
tighten bottom adjuster screw (clockwise) while loosening the top adjuster screw (counter clockwise) will make backlash smaller.. tighten top adjuster screw (clockwise) while loosening the bottom adjuster screw (counter clockwise) will make backlash bigger. ( backlash for new crown and pinion should be 0.010 to 0.012 play) (backlash for used crown and pinion) should be 0.012 to 0.015) i hope this is a little more easier to understand 😁
Nice buddy, keep goin, done subs
done subscribe buddy
Thank you Sir, naka sub na din po ako sa inyo sir. Nice content Boss ok 👍🏼
💯👍
Sick brother!!!!
Thank you brother
Not doing pattern?
what’s your address? Can you rebuild my differential Meritor MV2014-279?
lol watching you grind those case halves...you must never check runout =\
A little grinding/buffing won’t hurt 🫤
What no tread lock dude
There are tread locks on the bolts, for crowns & diff case just wasn’t shown on the video cuz the transition on each clip was speed up or got cut off. Yah but i put the red tread loctite for all bolts and nuts especially the inner bolts of the differentials or transmissions. Thank you for watching and your comment. 👍🏼
Vidio swae
Bro you not explain