Hi Jake, i did replace the lens and it was not easy. I used heat gun to worm up the silicone that was used to seal the lens to help with removal. In found easier to cut most of the lens off so that i can use pliers to grab on the edge and pull lens off. After everything is clean and you have new sealant and new lens in place i used bags of sand and placed them over new lens to apply even pressure this way you have better chance of getting even or 100% seal all the way around.
Hi David, i order it from Amaon but realised that it was not the best thing to do. Quality of parts is not good and they last only few months. You may be better off going on a junkyard and buy used ballast.
Do you have to programme ballast on this car
Did you have to programme the ballast or not
Hey man, did you ever replace the lens on your xenon's? Looking to replace mine and wanted some input. Thanks!
Hi Jake, i did replace the lens and it was not easy. I used heat gun to worm up the silicone that was used to seal the lens to help with removal. In found easier to cut most of the lens off so that i can use pliers to grab on the edge and pull lens off. After everything is clean and you have new sealant and new lens in place i used bags of sand and placed them over new lens to apply even pressure this way you have better chance of getting even or 100% seal all the way around.
@@dzekanovic Gotcha, sounds like it's possible then. Though I'll probably hold off until absolutely necessary. Thanks for the info!
Thanks for this video 💪🏻💪🏻👍🏼
Where did you order the ballast from? Thanks
Hi David, i order it from Amaon but realised that it was not the best thing to do. Quality of parts is not good and they last only few months. You may be better off going on a junkyard and buy used ballast.
I'll try to fix this ballast tomorrow, maybe head it or try to open it
I had the same issue as you but I got the light to work but now the bright doesn’t work on one side. Will replacing this fix it?