Link to Aliexpress: alii.pub/6vix1o?erid=2SDnjdLukEt alii.pub/6vpb32?erid=2SDnjcAJp2L Official page: sculpfun.com/products/sculpfun-sf-a9-40w-laser-engraver-cutting-machine
Would be great to see cut tests on 19 and 22 mm particle-board flooring plates, 7-10mm laminate floor planks and 15mm plywood(the foil-covered construction stuff)- These 3 are by far the strongest, cheapest and must useful materials for constructing a whole host of functional items(laminate can generally be used as a direct replacement for 5mm alu-plate) so aside from storage constructions all those home-made stationary tools(planer/sander/angle-grinder/drill-powered and what not) that are all over youtube on hundreds of challes can all be made using these materials and will yield long-lasting and genuinely useful tools....
@@Polkilo Would have been nice to see it on particleboard flooring as well but in any case this actually IS useful as being able to cut laminate and foil-coated plywood(usually 15mm thick) opens up so many possibilities and pretty much EVERY homemade tool/machine design on youtube suddenly becomes quick and easy with those two alone.... Just bought a cnc but looks like a laser is next...
@@Polkilo купил такой же фрезерный гровер что и вы , поставил тестовую картинку вырезать, скорость портала очень маленькая вы не пытались ее как-то повысить или эта скорость маленькая из за тестовой картинки?
Link to Aliexpress: alii.pub/6vix1o?erid=2SDnjdLukEt
alii.pub/6vpb32?erid=2SDnjcAJp2L
Official page: sculpfun.com/products/sculpfun-sf-a9-40w-laser-engraver-cutting-machine
Would be great to see cut tests on 19 and 22 mm particle-board flooring plates, 7-10mm laminate floor planks and 15mm plywood(the foil-covered construction stuff)-
These 3 are by far the strongest, cheapest and must useful materials for constructing a whole host of functional items(laminate can generally be used as a direct replacement for 5mm alu-plate) so aside from storage constructions all those home-made stationary tools(planer/sander/angle-grinder/drill-powered and what not) that are all over youtube on hundreds of challes can all be made using these materials and will yield long-lasting and genuinely useful tools....
Hello! I made one more video with tests. Maybe it will be useful for you th-cam.com/video/ZHMmVilZiVE/w-d-xo.htmlsi=NmWKAOfOrJBn3rB3
@@Polkilo Would have been nice to see it on particleboard flooring as well but in any case this actually IS useful as being able to cut laminate and foil-coated plywood(usually 15mm thick) opens up so many possibilities and pretty much EVERY homemade tool/machine design on youtube suddenly becomes quick and easy with those two alone....
Just bought a cnc but looks like a laser is next...
Крутая штука! Так держать!
Так точно 😄🫡
can you please try the images? passthrough enable dithered and also other modes. thank you
Hello! I made one more video with tests. Maybe it will be useful for you th-cam.com/video/ZHMmVilZiVE/w-d-xo.htmlsi=NmWKAOfOrJBn3rB3
thank you very much my friend please do more photo engraving videos
@@Polkilo
Привет, хорошая работа, прикольное видео. Если не секрет где взяли файл для многослойного кота?
Спасибо) так сразу ссылку на кота не нашел но брал с этого сайта www.ameede.com/?s=Mandala
Спасибо@@Polkilo
Эм а откуда такие хорошие макеты, купили или сами научились?
Вы же lightburn по умолчанию используете?
Сам я нашел ресурс от Gistroy по программе.
Большую часть беру с Pinterest. Есть хороший сайт Ameede.com много интересных макетов
@@Polkilo да пинтерест словно "манна". Спасибо.
Жаль что с этими санкциями ещё и Еатсу перекрыли ((
Здравствуйте, а как с вами связаться?
Добрый день) можно тут, или на почту pashastr@tut.by.
@@Polkilo купил такой же фрезерный гровер что и вы , поставил тестовую картинку вырезать, скорость портала очень маленькая вы не пытались ее как-то повысить или эта скорость маленькая из за тестовой картинки?
Не совсем понял, вопрос про фрезерный Twootrees 450 или о Sculpfun A9?
@@Polkilo 450
@@Polkilo может другое предложение есть для управления