i am geting this error in colab ERROR: Could not find a version that satisfies the requirement mediapipe==0.8.11 (from versions: 0.9.1.0, 0.9.2.1, 0.9.3.0, 0.10.0, 0.10.1, 0.10.2, 0.10.3, 0.10.5, 0.10.7, 0.10.8, 0.10.9, 0.10.10, 0.10.11, 0.10.13, 0.10.14) ERROR: No matching distribution found for mediapipe==0.8.11
I'm getting this error... When loading the graph, the following node types were not found: - Integer Nodes that have failed to load will show as red on the graph. All missing nodes were installed, and I can't find any nodes to instal that might be that one. Not sure how to describe but it is the node for width and height... Any ideas?
Hey I installed all required custom nodes but it says: "When loading the graph, the following node types were not found: • Integer Nodes that have failed to load will show as red on the graph." These are the nodes for the width and the height right at the beginning of the workflow. Any Ideas?
😢😢😢 why you didn't make this tutorial step by step??? Many steps haven't cleared that how to use workflow file?, how to extract it, how to use in software, which software did you use?? If you make any tutorial then please provide the right information step by step because not everyone is perfect and smart to use these skills. 😢😢😢😢😢😢😢😢
The comfyui part is broken - just doesn't work even after tons on troubleshooting. Please look into this and rework a solution, if possible. Would highly appreciate.
Hello guys! Maybe someone know how to fix that problem? ♥ SyntaxError: Unexpected non-whitespace character after JSON at position 4 (line 1 column 5) Can't prompt for this reason :(
i have a question regarding the google colab method to lipsync: as the first step says "install dependency and download pretrained model" does this download anything to my computer? i was under the impression google colab is running all of that in a cloud or rather from a different notebook through a cloud or am i wrong?
You do not download anything to your personal computer! But since you are using a cloud computer, the models and code must be downloaded to that machine, as they are removed at the end of the session.
yes, one huge issue is the downgraded video quality on almost every app i find along with a trifling watermark. It's a bit of a pain to keep copying and pasting mouths that are hq.
My alternative workflow is to lower the position of the mouth in my original video so it's outside of the Synclabs watermark area, take the Synclabs result, crop the mouth part and overlay it on my original clip.
Error occurred when executing ImageScale: [enforce fail at alloc_cpu.cpp:114] data. DefaultCPUAllocator: not enough memory: you tried to allocate 21026304000 bytes. I'm getting this error. Any fix?. Ram 16gb rtx 3050ti 4gb.
Does it usually take time within the Face Restore Lips Section? I think it might be stuck for me. It just shows "Loading CodeFormer: codeformer.pth Starting restore_face with codeformer_fidelity: 0.7000000000000001" and then nothing happens for quite some time.
nvm its because my video was 45 seconds long so there is not enough ram to to execute the prompt. looks like I have to cut the video in quarters and then stitch them together again in one file
It was great, until the end of the procedure, where It could not complete the process , because of Nvidia related issues. I don't have Nvidia hardware, I have AMD. Good tutorial anyway.
Hi, your video is very helpful! can you tell me from which custom nodes did you take the width and height nodes ? I didn't find them with the 'install missing custom nodes' button! thanks in advance 🙂
Oh they changed that. These are integer nodes. You can add “primitive” nodes instead or create new “integer” ones. But I’m planning on revising this whole workflow very soon because it can be even better now!
bro used AI to make his hair look short
i am geting this error in colab ERROR: Could not find a version that satisfies the requirement mediapipe==0.8.11 (from versions: 0.9.1.0, 0.9.2.1, 0.9.3.0, 0.10.0, 0.10.1, 0.10.2, 0.10.3, 0.10.5, 0.10.7, 0.10.8, 0.10.9, 0.10.10, 0.10.11, 0.10.13, 0.10.14)
ERROR: No matching distribution found for mediapipe==0.8.11
Any fix for this error?
I'm getting this error...
When loading the graph, the following node types were not found:
- Integer
Nodes that have failed to load will show as red on the graph.
All missing nodes were installed, and I can't find any nodes to instal that might be that one.
Not sure how to describe but it is the node for width and height...
Any ideas?
the same problem faced me
@@Ahmedalaa12198 the same problem faced me also. I dont understand how to face it
Hey I installed all required custom nodes but it says:
"When loading the graph, the following node types were not found:
• Integer
Nodes that have failed to load will show as red on the graph."
These are the nodes for the width and the height right at the beginning of the workflow. Any Ideas?
Same problem man.
Same issue. Is there a fix or workaround for this?
@@prenzlimpao1444 ??????/
??????
It gives me error in Integer node and when I installed it from the manager it still not working although rebooted the server and refreshed the page
😢😢😢 why you didn't make this tutorial step by step??? Many steps haven't cleared that how to use workflow file?, how to extract it, how to use in software, which software did you use??
If you make any tutorial then please provide the right information step by step because not everyone is perfect and smart to use these skills. 😢😢😢😢😢😢😢😢
The comfyui part is broken - just doesn't work even after tons on troubleshooting. Please look into this and rework a solution, if possible. Would highly appreciate.
I mean this was REALLY useful, especially Google colab thing. What text to speech (free) you think is best ?
Please make a Ai Workflow video on making a "Cartoon".
Hello guys! Maybe someone know how to fix that problem? ♥
SyntaxError: Unexpected non-whitespace character after JSON at position 4 (line 1 column 5)
Can't prompt for this reason :(
same here...
nice work Buddy :-)
How to run this json file
What is the maximum of a video length in minutes that I can upload?
Horrible video I came for synch lab
Great - thank you:)
Which software ise for maintain quality
i have a question regarding the google colab method to lipsync: as the first step says "install dependency and download pretrained model" does this download anything to my computer? i was under the impression google colab is running all of that in a cloud or rather from a different notebook through a cloud or am i wrong?
You do not download anything to your personal computer! But since you are using a cloud computer, the models and code must be downloaded to that machine, as they are removed at the end of the session.
@@mickmumpitz good to know, thanks for clarifying!!
Always amazing, man! 💪🏻🏆
Thank you!!
Amazing workflows man, you'r channel ver inspiring!!! thank you👊
This looks like a great workflow. I can’t wait to try it.
Woman "Hans Bianca He is the toughest hunter on the Island!"
Guy: "What does he hunt?"
Woman: "Ducks!"
ROTFL!
yes, one huge issue is the downgraded video quality on almost every app i find along with a trifling watermark. It's a bit of a pain to keep copying and pasting mouths that are hq.
My alternative workflow is to lower the position of the mouth in my original video so it's outside of the Synclabs watermark area, take the Synclabs result, crop the mouth part and overlay it on my original clip.
Error occurred when executing ImageScale:
[enforce fail at alloc_cpu.cpp:114] data. DefaultCPUAllocator: not enough memory: you tried to allocate 21026304000 bytes.
I'm getting this error. Any fix?. Ram 16gb rtx 3050ti 4gb.
Thank you very much.
excellent video man
Ahhhh perfect timing...was trying to vet my lip sync choices for a project and now indint have to...this looks awesome!
thanks for the heart
I'm searching for something that correct the lipsinc of a real video, would be very useful in music video
HeyGen does this, every day 1 free token (1min translation and lip sync) it’s perfect
cool bro
What would be the best platform to Showcase my AI videos for monetization?
hey im not that technical person so please can you tell how to open and work with that json workflow file. steps from 2:56
Hey can somebody help me. I cannot install the lykosai custom node or the core interference node
hello ur videos are just awesome, you may shorten your channel's pic ears! 🤣
impressive!
🚀🚀🙏
Now my issue is which laptot can be used for this ?
nice work!! congrats!!
Great workflow. I also use Digital Anarchy Deflicker to help with smoothing.
Does it usually take time within the Face Restore Lips Section? I think it might be stuck for me. It just shows "Loading CodeFormer: codeformer.pth
Starting restore_face with codeformer_fidelity: 0.7000000000000001" and then nothing happens for quite some time.
nvm its because my video was 45 seconds long so there is not enough ram to to execute the prompt. looks like I have to cut the video in quarters and then stitch them together again in one file
are people contacting you for work on ai films?
It was great, until the end of the procedure, where It could not complete the process , because of Nvidia related issues. I don't have Nvidia hardware, I have AMD. Good tutorial anyway.
same here.
Daaaaanke King! Neuen Subscriber, klasse Arbeit! 🤝💖
Hi! thanks for your vids! is it possilbe to run SD ComfyUI in a M1 mac? and if it is, how could I install it? Thanks again!
i hope johny sells his game console and buys a PC like normal people. hype \:D/
3:00
where is that user interface ?
Woot! Looking forward to the next short.
Can it be done to a picture
Amazing! Thank you!
Gpu? 😮
Hey Mickmumpitz, are you related to Samson AI by any chance?
All Germans are related to one another 😂❤
@@theGreatQAwakening dude they both look SIMILAR.
Easy wav2lip 8.1 colab is even better.
That's true. It already uses GFPGAN build-in when syncing the lips.
please share it
@@leemark7739 Just google: Easy_Wav2Lip_v8.1.ipynb
@@leemark7739 Jst google it. Its the one by easymartz.
666
Hi, your video is very helpful! can you tell me from which custom nodes did you take the width and height nodes ? I didn't find them with the 'install missing custom nodes' button! thanks in advance 🙂
Oh they changed that. These are integer nodes. You can add “primitive” nodes instead or create new “integer” ones. But I’m planning on revising this whole workflow very soon because it can be even better now!
@@mickmumpitz thank's a lot for your answer 😀i resolved
@@mickmumpitzcan you give a step by step to do this? I’m having this problem as well
Hey, can you please share this solution? I need this very much!
@@lauraarcangeli2353 What did you do to resolve it?
👍👍
There is a better lipsinc software available.
Which are u talking about??
@@navedbhati9260don’t just say that and not say what it is
Oh please tell us, mysterious one
hmmm I thought I posted it. Let me go get the link. @@AINIMANIA-3D
Sync Ai
aint no one someone is proud of creating nothing
how many vram do i need