Either nobody elses camera/mic does the n54 justice or budget bimmers have the best sounding 335s on the planet. Either way these guys have the absolute best 335 content on the internet and the best n54 sounds you will find!
Picking up my first n54 powered car next week and im also an exhaust fabricator soooooo... I’m gonna experiment till it sounds like the best one around lol
I just installed this clutch (SST) with jack stands by myself, took me about 16 hours :P. Make sure you replace the Aluminum E18 Bolts if you have them (2007 335i coupe), they will brake if you try to re torque them to 53 f/t. When mounting the trans back taike off the trans mount bracket, it will make it a lot easier to slide the trans into the flywheel ( I had to tilt the trans from the back of it ) !!!!
47 minute video! fucking KILLING it content wise! I was literally rewatching your long videos again the other day hoping for another! I will always majorly appreciate as long a video as possible, as with a channel like you guys where you're not fake and have such good banter you kinda never want it to end. I'd legit watch a 2-5 hour raw video of the fuckery/banter between you two haha. nice one and thanks again from the UK. One day I shall have to come out there and buy a beater to skid or summit and crash/donate to you when I leave!
Hey guys I am building a n54 currently. I am looking for a complete part list of everything I need to do this build. I am going to be building an auto with paddle Shift though is only difference. There is a shop near me that’s cracked the code and builds a killer auto for the n54 that picks up serious time compared to manual. Can anyone link me to a full build list?
You guys are the best. Always having good time watching man. I am jealous of Canadian brother. I am thinking about same setup but mine n54 is XI. Please can you guys make me a list of all the parts I need to build setup like in this video? You guys are the best 100% real DIY guys . I would love to hang out with u guys one day man. You guys are Mintttt.
That turbo is fucking monstrous, was that a n54 twin turbo before? I just got a n55 335xi and blew up the stock charge pipe (noob) did the stage 1 mhd, I'm kinda nervous cause I can't find o ring and hope it didn't get sucked up throttle body, new pipe should be here in a few days hoping to find o ring when I drop the engine tray. Sick what you guys did to this car.
It seems there’s not a lot of people going 64+ on this car. I saw doc race offers a 67 and a 68 but can’t find anyone who’s actually installed one. Would it just be way too much lag?
I think DA BOYS have been watch some "ZIP TIES N PIAS PLIES". LOL. "MINT", "PUT ER IN THE KETCHUP", "REV ER UP N DUMP ER". But I guess as another Canadian watching other Canadians go to USA as a Canadian makes almost all Canadian Content. EH?
Hey guys how much does it cost for a good shop in parts and labor to do a single turbo N54? I'd do the labor myself but I neither have the space or time
@@heatchamps2011 the doc kit alone is 5k so with all the other supporting mods it's probably at least 10k alone in parts, I have no idea how much the labor would be
@@AquaStevae its not about budget. the content they are creating is superior to every other youtuber out there. they should call themselves premium bimmers.
Nice! I plan on single swapping my N54 tomorrow afternoon between 4 & 5PM heard its a DIY job that you dont even need tools for
Glue ons
Press fit
Benji Da Velcro strap ons
Slip on, w one zip tie i heard idk
lego
Either nobody elses camera/mic does the n54 justice or budget bimmers have the best sounding 335s on the planet. Either way these guys have the absolute best 335 content on the internet and the best n54 sounds you will find!
Picking up my first n54 powered car next week and im also an exhaust fabricator soooooo... I’m gonna experiment till it sounds like the best one around lol
@@LuisGarcia-vs7zd God help you lol
Luis Garcia what did you settle on?
@@LuisGarcia-vs7zd yea g update
Zachary Wright I could give you one in a couple days, I have the exact same setup except upgraded twins. Should sound similar tho
Bro open a single turbo install garage. We all need it it for this platform.
Bro I can’t wait for you guys to get big, this shit is hilarious and informative
You guys should do a meet-up somewhere. I'm in CT and would definitely show up but I'm sure others who are further away would as well. Top notch work!
Great job guys. 4 days and running, is very fast💪
Sweet! Took me almost 3 days to just do inlets, outlets and 3” intercooler piping on my 135i...never again. 😂
It’s not a FBO lol
Ok
man its so nice of you to help him with his single turbo. so when we upgrading mine?
Such a sick car, he gave me a ride not to long ago and it's such a mean car, Yous did great!!
Awesome work fellas that's a shit ton of work in 4 days
37:44 sure hope those zipties didnt get sucked up when yall did some test revs haha
Fantastic video you guys are BMW gurus 4 days to do all that work amazing 😉
dope vid... should've split it in 2 videos so your channel can keep pouring out the content. keep up the good work fellas
That's insane lol nice work! Not something I'd ever do but it's fun to watch ☺️👍👍
I just installed this clutch (SST) with jack stands by myself, took me about 16 hours :P. Make sure you replace the Aluminum E18 Bolts if you have them (2007 335i coupe), they will brake if you try to re torque them to 53 f/t. When mounting the trans back taike off the trans mount bracket, it will make it a lot easier to slide the trans into the flywheel ( I had to tilt the trans from the back of it ) !!!!
E90 lci M sport is the king
47 minute video! fucking KILLING it content wise! I was literally rewatching your long videos again the other day hoping for another! I will always majorly appreciate as long a video as possible, as with a channel like you guys where you're not fake and have such good banter you kinda never want it to end. I'd legit watch a 2-5 hour raw video of the fuckery/banter between you two haha. nice one and thanks again from the UK. One day I shall have to come out there and buy a beater to skid or summit and crash/donate to you when I leave!
That pimped out 70's music was my fav part 😍
When you were talking about the "time warp" at around 9 minutes, the term you are looking for is a "speed ramp"
Great job guys !!!
so sick nice build!
Favorite Bimmer bro’s 👌🏼
I’m stoke for you guys nice work!
That car hauls ass
Dude,..if you ever get a proper shop,...you're going to be doing quite well! Keep doing the damn thing!
Nice project congratulations
AWESOME WORK GUYS!!!! Hey... What Diagnostic app tool are you using for live boost info toward the end??
We’re stuck at a point where we need to relocate the coolant reservoir. Any advice?
sick, ill roll down from canada to get wild on mine. get it mint
I swear the street exhuast sounds so good single turbo. Oem its quiet af.
How much is this setup I'm interested in the same kit for my 335i. I'm in boston.. let me kno if I can pay you for the install
LOL that intro
YOOU BETCHA GOONA POOT THE TUR-BOH ON THAT CAAR BUDDAY.
Could you test Holset HX40 twin scroll setup?
Smashed it boys well done but 1 question please I need like This but automatic please any help e90! Lci!!!
As far as the n54 goes and single turbo, what’s your thoughts on the 535i? The 2007-2010 have the same n54 as the e9X correct?
God I love that intro 🤤
Boom boom boom boom.. I want you in my room! Love that song
Saw this car at mpac sounds soo good
Thanks!! Mpact was a lot of fun!
Hey bros I have a 2007 335i coupe, N54. I'm turning this buld to be strictly drift missile. Cant seem to finde an angle kit for this car, any advise??
Reppin that HP Logic
do you have all the parts listed anywhere, looking to do the same
1) how much was all this upgrading?
2) how much would you charge me to do this to my 2011 335is from NJ?
christian poz dm him on instagram or facebook
Hey guys I am building a n54 currently. I am looking for a complete part list of everything I need to do this build. I am going to be building an auto with paddle
Shift though is only difference. There is a shop near me that’s cracked the code and builds a killer auto for the n54 that picks up serious time compared to manual. Can anyone link me to a full build list?
You guys are the best.
Always having good time watching man.
I am jealous of Canadian brother.
I am thinking about same setup but mine n54 is XI. Please can you guys make me a list of all the parts I need to build setup like in this video?
You guys are the best 100% real DIY guys .
I would love to hang out with u guys one day man.
You guys are Mintttt.
Following
You can please write or link all parts that I need for same uprage..
19:30 Best music right there.
VengaBoys - boom boom boom
37:47 is the part where they cut out the scene where the turbo ate the zipties sitting inches away from the impeller
Lmao
Can i buy the stock twins?
Good job
Do you have a link for that vargas pcv kit?
GJ Boyz !!
can i hit the red line on stock internals on n54?
That turbo is fucking monstrous, was that a n54 twin turbo before? I just got a n55 335xi and blew up the stock charge pipe (noob) did the stage 1 mhd, I'm kinda nervous cause I can't find o ring and hope it didn't get sucked up throttle body, new pipe should be here in a few days hoping to find o ring when I drop the engine tray. Sick what you guys did to this car.
Dont want to look through 200+ comments lol. What exhaust is on the bmw in the start of the video? Mine has to sound like that!!!
Hey guys I’m from Ontario as well. Looking to turbo my 335I. Could you guys help me with that
did you guys install a LSD yet?
Mannn how much would I have to pay you guys to install ps2 on mines I’m in the Bronx ny
Where r u guys located i saw that HPlogic shirt and was like oh wat
Wish I could do this to my 750i....
It seems there’s not a lot of people going 64+ on this car. I saw doc race offers a 67 and a 68 but can’t find anyone who’s actually installed one. Would it just be way too much lag?
There's a few out there, but I don't think anyone is maxing out the 6466
I will drive all the way from the Netherlands to get a single.
Pure turbos in bels helpt je ook wel
Will this work for a 328i ?
Awesome
What is this song at the end of the video
@38:57 let’s see him stall it. “What?” Pull it out.
😂😂
That clutch SuCkS to drive at first.
Only problem with is after extensive tuning it'll be over $12k. And internals need to be done if your over 550whp.
oil filler cap looks abit burried in the engine cover
Just wondering if this can be done to the M57 Diesel
The engine wouldn't withstand that much pressure.
N54 was literally made for this.
Hi. Are additional fuel injectors additionally installed in this modification? Or is it only powerful with direct injection?
yes - for full E85 we installed a BMP port injection kit that has bosch 750cc injectors.
HEY LISTEN HERE ITS BEEN 4 WEEKS ISNCE U UPLOADED IM NOT ABOUT TO WATCH U GUYS DIE OUT KEEP GOING KEEP TRYING!!!!!
Great job!!!! Wow!! Did you use a specific map after installing everything?
Simone Lorenzo In the video he mentions that the JB4 is on map 1
Your from RI WTF?! dope I just bought my e92 335 can’t wait to start modding it 😩😩
Chlamydia Boi jus bought my e92 335 in all black last Saturday! such fun cars
What management?
can you link the pcv setup(fittings/etc)? also, how is the car holding up?
vargasturbo.com/product/vtt-modular-pcv-catch-can-ready-to-install-kits/ - car is good, stored for the winter and waiting for spring!
Lol it took me 27 days to do mine in the evening by myself. I'm too picky
I think DA BOYS have been watch some "ZIP TIES N PIAS PLIES". LOL. "MINT", "PUT ER IN THE KETCHUP", "REV ER UP N DUMP ER". But I guess as another Canadian watching other Canadians go to USA as a Canadian makes almost all Canadian Content. EH?
How much did it all cost?
Intro Soundtrack?
Hey guys how much does it cost for a good shop in parts and labor to do a single turbo N54? I'd do the labor myself but I neither have the space or time
That's why we were born with two kidneys my son.
About 5-6k
U will spend 10 k . Around there . Everything done
@@heatchamps2011 the doc kit alone is 5k so with all the other supporting mods it's probably at least 10k alone in parts, I have no idea how much the labor would be
What’s the outro song
Big Budget Bimmers...
what exhaust does he have on the car?
its a vrsf 3.5 inch street exhaust :)
I wish this video was longer. I had an hour break. WTF am I supposed to do for 12 mins?
What state are you guys in?
3:00 10 thousand dollars later
its around 15k to do everything the way they did
@@Matty7x Nothing budget about that...
@@AquaStevae its not about budget. the content they are creating is superior to every other youtuber out there. they should call themselves premium bimmers.
@@Matty7x 15 stop smoking it's about 5k 4k or 3k no more
Can you post a link or part number for the NTK oxygen sensors you guys used in the build?
www.amazon.com/gp/product/B001UCF4UI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
@@csmitas Awesome, thank you!
You guys are the shit, at 19:50 I heard vengaboys in the background
Nice work. What tune are you running in the video? Your friend in the Toronto or Ottawa Area?
tune during the first drive/break in was an OTS map - the clips at the end and beginning were on a tune by Ken Atkinson from Wedge
Brad Irons what area of the GTA. I’m in caledon. Gonna keep my eyes peeled for this car. Won’t race it though ;)
I'm up in the Ottawa Area, building an N54. In the process of a motor swap and Pure 600's.
Link to the ntk o2s please!
www.amazon.com/gp/product/B001UCF4UI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
What types of lifts were those you used to jack the car? Also can I bring you out to Reno to help do mine? I got you on a room downtown! Haha
bit.ly/Quickjack
How bad is the turbo lag on a setup like that for like a daily
Full boost around 3500
i fucking love you guys
You guys should install my single turbo kit 🌚❤️
12:07 dat fart
How is this video only 2100 likes? Shows how hateful and fake people are... great work brother!!!
Can we get a new upload for the brooosss
Fu**k guys You are awesome! I have a e90 with a n54 and you are a inspiration for me! keep on!
What exhaust is on that e90?
Vrsf street
Sooooooo can I drive my e61 over your way to have the same thing done to my N54, too??? Lol #But4RealTho 🙏