Using some of the commercial drones with a tablet a second controller may be required to allow the drone pilot to see the on screen flight information and the production to receive a clean video feed.
Thank you for this video. This is very helpfull. I would like to ask you about your experience with reach and stability of the signal. How far and how stable? Thanks for your trouble. Rinse
Hi i find this quite useful. Thankyou. Could you please tell me why my output becomes pixelated or blurry when streaming but the recorded footages give good quality
You say streaming so I am a bit confused. The HDMI output from the controller should be as good as you are seeing on the controllers screen. Keep in mind that you need the controller you are pulling HDMI from to be line of sight with the drone. You can move around to maintain the line of sight with a second controller to maintain signal but how I often do this is just leave the HDMI connected controller sitting there so it may become obstructed. I always try to get some height out of it by attaching it to a C-Stand. Hope this helps.
@@BaliDroneServices I haven't used the Hollyland but the only thing I would slightly be concerned about is latency of the wireless. Otherwise I don't know why it would not work.
@Bali Drone Services I haven't used the Hollyland but the only thing I would slightly be concerned about is latency of the wireless. Otherwise I don't know why it would not work.
@@smfmediadesign well, that's true. Since I am doing it for live streaming to big scteen (like wedding reception and on stage performances), do you think it is worth to try to buy a 100 yards SDI cable amd try in out of the SDI out port of the TX to the RX at the switcher desk? That is the normal/max distance the shooting object to the A/V controller desk. But surely I need to use HDMI-to-SDI converter since my remote controller doesn't have SDI out port. Please kindly advise.
From the DJI website: "The DJI Smart Controller is compatible with DJI Mini 2, Mavic Air 2，Mavic 2 and Mavic 2 Enterprise Series, Phantm 4 Pro V2.0. To ensure compatibility, always make sure your aircraft is updated with the latest firmware."
Love the idea of splitting out the controller to 2 people. Also nice for a clean video feed.
Using some of the commercial drones with a tablet a second controller may be required to allow the drone pilot to see the on screen flight information and the production to receive a clean video feed.
You should go back and show each controller device and how to get them sync'd up so one is mirrored, aka how its configured.
Thank you for this video. This is very helpfull. I would like to ask you about your experience with reach and stability of the signal. How far and how stable? Thanks for your trouble. Rinse
How do you connect two controllers to the mavic pro 2
Which dji drone did you use with the smart controller
That was the Mavic 2 Zoom.
@@smfmediadesign thank you
how do we link secondary controller
Hi i find this quite useful. Thankyou. Could you please tell me why my output becomes pixelated or blurry when streaming but the recorded footages give good quality
You say streaming so I am a bit confused. The HDMI output from the controller should be as good as you are seeing on the controllers screen. Keep in mind that you need the controller you are pulling HDMI from to be line of sight with the drone. You can move around to maintain the line of sight with a second controller to maintain signal but how I often do this is just leave the HDMI connected controller sitting there so it may become obstructed. I always try to get some height out of it by attaching it to a C-Stand. Hope this helps.
Can I just use the smart controller as a drone remote and as well as the camera operator?? So I dont need to buy the DJI normal remote again.
Yes you can. You just end up limited by the HDMI cable.
@@smfmediadesign if I use Hollyland Cosmo C1, I might be walking around to get the best sight of my drone position. What do you think??? 😯🤔
@@BaliDroneServices I haven't used the Hollyland but the only thing I would slightly be concerned about is latency of the wireless. Otherwise I don't know why it would not work.
@Bali Drone Services I haven't used the Hollyland but the only thing I would slightly be concerned about is latency of the wireless. Otherwise I don't know why it would not work.
@@smfmediadesign well, that's true. Since I am doing it for live streaming to big scteen (like wedding reception and on stage performances), do you think it is worth to try to buy a 100 yards SDI cable amd try in out of the SDI out port of the TX to the RX at the switcher desk? That is the normal/max distance the shooting object to the A/V controller desk. But surely I need to use HDMI-to-SDI converter since my remote controller doesn't have SDI out port. Please kindly advise.
Nice
Scusa ma non ho capito come fai funzionare due controller... Puoi spiegare meglio grazie
Can it work with. Mavic air 2
From the DJI website: "The DJI Smart Controller is compatible with DJI Mini 2, Mavic Air 2，Mavic 2 and Mavic 2 Enterprise Series, Phantm 4 Pro V2.0. To ensure compatibility, always make sure your aircraft is updated with the latest firmware."