Virtual PortChannel (vPC) Configuration
ฝัง
- เผยแพร่เมื่อ 6 พ.ย. 2023
- Join this channel to get access to perks:
/ @pmnetworking
Hello, Welcome to PM Networking...
My name is Praphul Mishra. I am a Network Security Engineer by profession and a Certified Cisco trainer by passion.
About this video:-
Virtual PortChannel (vPC) Configuration
CCNA Configuration Playlist:-
• Basic Network Configur...
1. Basic Routers and Switches Configuration
/ playlist. .
2. Packet Flow
/ playlist. .
3. Real Devices Configuration
/ playlist. .
4. EIGRP A-to-Z
/ playlist. .
5. VPN
/ playlist. .
6. Subnetting
/ playlist. .
7. OSPF A-to-Z
/ playlist. .
8. FHRP
/ playlist. .
9. STP
/ playlist. .
10. Voice over IP
/ playlist. .
11. Troubleshooting
/ playlist. .
12. ASA
/ playlist. .
13. EtherChannel
/ playlist. .
14. BGP
/ playlist. .
15. Policy-Based Routing
/ playlist. .
16. IPv6
/ playlist. .
17. VRF
/ playlist. .
18. MPLS
/ playlist. .
Our Social links:-
TH-cam:- / pmnetworking
Facebook:- / pm.netwoking
Instagram:- / pm.networking
LinkedIn: / 1-pm-networking
Telegram:- t.me/p_m_networking
Whatsapp:- wa.me/918511826341
#ccna #ccnp #ccie #network_troubleshooting #networking_interview #network_configuration #network_engineer #network_engineer_training #cisco_network_configuration #router_configuration #switch_configuration #firewall_configuration #interview_questions_network_engineer #real-time_network_configuration #scenario-based_network #network_troubleshooting #network_troubleshooting_network_engineer #cisco_network_configuration #basic_network
![[TH] 2024 PMWC x EWC Group Stage Day 2 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/vwIQyCmNIBU/mqdefault.jpg)
Sir you are the very dedicated person for doing hardwork on networking, Just because of your hardwork somany students earned good knowledge on networking ......thank you my real hero .....hats of...
So nice of you
It's Great tutorial keep it up !
Thanks a lot!
Great explaination, please make more videos on nexus switch
great help for nexus switch newbie like me, thanks mate.
Glad it helped
Hello Sir, First of all thanks for making a video on Nexus.... I request you to make VPC Complex topology for better understanding of this concept
Sure I will
Great explaination, thank you very much
You are welcome!
After vpc domain config sw1 &2 are act as a single logical switch? Like stacked or vss...
Show vpc 20 comand, it should show members of both switches like te 1/0/3, te 2/0/3 right?
Sir can you do one video acl in and outbound direction how its matches with packet source ip
Nice video sir..if possible please upload a lab with two isp with two different setup eg. Two routers , two firewall, two nexus switch, multilayered switch and access switch
Noted
Good Explanation
Keep watching
Sir , if both peer link and uplink of primary goes down in VPC , what will happen as uplink failure will suspend secondary member ports
Hi sir- can u pls explain and do the configuration below topic- Please
IDP
websense
how to apply pbf
QOS creation on router
Hello sir, I would like to know when will you broadcast live?
Hello,
Please resolve below query.
I have 2 nexus 9k in vpc and operating as L2 switch..above that I have fire eye device as upstream and above that I have. Fortigate firewall as gateway for down stream...My requirement is I have to add 2 another switches in downstream how will I add
Noted
To add two additional switches in your downstream setup, you should ensure they integrate smoothly into your existing network while maintaining redundancy and avoiding any potential loops. To add two additional switches in your downstream setup, you should ensure they integrate smoothly into your existing network while maintaining redundancy and avoiding any potential loops. Here’s a step-by-step guide:
### Step 1: Preparation
1. **Ensure VLAN Consistency**: Ensure the VLANs configured on your existing Nexus 9k switches are propagated to the new switches.
2. **Check VPC Configuration**: Confirm the VPC configuration between the two Nexus 9k switches is healthy and stable.
3. **Plan the Connections**: Decide how you'll physically connect the new switches to your existing network. Typically, you would connect each new switch to both Nexus 9k switches for redundancy.
### Step 2: Connect the New Switches
1. **Connect Switch 1 to Nexus 9k Pair**:
- Connect an uplink from the new Switch 1 to Nexus 9k Switch A.
- Connect another uplink from the new Switch 1 to Nexus 9k Switch B.
2. **Connect Switch 2 to Nexus 9k Pair**:
- Connect an uplink from the new Switch 2 to Nexus 9k Switch A.
- Connect another uplink from the new Switch 2 to Nexus 9k Switch B.
### Step 3: Configure the Nexus 9k Switches
1. **Configure Interfaces**:
- Configure the interfaces on both Nexus 9k switches that will connect to the new switches. For example, if you are using Ethernet1/10 and Ethernet1/11 on both Nexus 9k switches, you would configure them as trunk ports and include the necessary VLANs.
```shell
interface Ethernet1/10
switchport mode trunk
switchport trunk allowed vlan
channel-group 10 mode active
interface Ethernet1/11
switchport mode trunk
switchport trunk allowed vlan
channel-group 11 mode active
```
2. **Configure Port Channels**:
- Create port channels on the Nexus 9k switches for the connections to the new switches.
```shell
interface port-channel 10
switchport mode trunk
switchport trunk allowed vlan
vpc 10
interface port-channel 11
switchport mode trunk
switchport trunk allowed vlan
vpc 11
```
3. **Add Port Channels to VPC**:
- Ensure the port channels are added to the VPC domain. This step is crucial for redundancy and load balancing.
```shell
vpc domain 1
peer-keepalive destination
interface port-channel 10
interface port-channel 11
```
### Step 4: Configure the New Switches
1. **Trunk Ports Configuration**:
- Configure the uplink ports on the new switches to connect to the Nexus 9k switches. Ensure they match the trunk settings.
```shell
interface Ethernet1/1
switchport mode trunk
switchport trunk allowed vlan
channel-group 10 mode active
interface Ethernet1/2
switchport mode trunk
switchport trunk allowed vlan
channel-group 11 mode active
```
2. **Configure Port Channels on New Switches**:
- Create corresponding port channels on the new switches.
```shell
interface port-channel 10
switchport mode trunk
switchport trunk allowed vlan
interface port-channel 11
switchport mode trunk
switchport trunk allowed vlan
```
### Step 5: Verification
1. **Verify VPC Status**:
- Check the VPC status on the Nexus 9k switches to ensure the new port channels are up and part of the VPC.
```shell
show vpc brief
```
2. **Verify Connectivity**:
- Test connectivity from devices connected to the new switches to ensure they can reach upstream devices and the Fortigate firewall.
3. **Monitor the Network**:
- Monitor the network for any potential issues such as loops or misconfigurations.
By following these steps, you will have successfully added two new switches to your existing Nexus 9k VPC setup, maintaining redundancy and optimal network performance.
1. Ensure VLAN Consistency: Ensure the VLANs configured on your existing Nexus 9k switches are propagated to the new switches.
2. Check VPC Configuration: Confirm the VPC configuration between the two Nexus 9k switches is healthy and stable.
3. Plan the Connections: Decide how you'll physically connect the new switches to your existing network. Typically, you would connect each new switch to both Nexus 9k switches.
@@PMNetworkingHello,
In this Back to back VPC all 4 switches are acting as Layer 2 only...Is there any chance of loop happen?
As servers are connected on upper side (existing switches) vpc switches also??
What is the maximum ports that can be assigned to lacp?
16
can we configure vpc on router ?
Yes
Port channel 20 member port was down.
Thanks for sharing
Hi sir- can u pls explain and do the configuration below topic- Please
IDP
websense
how to apply pbf
QOS creation on router
Sure