Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t facebook.com/how.to.repair.appliances/
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video, thanks. You managed to make the belt location look effortless, but I struggled a bit even with the pipe. As a few have said, aligning the front panel and vent pipe on re-assembly was quite tricky and needed extra hands. Got the job done though and working perfectly so, thank you very much.
The video was excellent, took it apart in the same order as the video, simples! After putting on the belt, which i have to admit nearly gave me a hernia the next bit was extremely intricate and probably needed to show more detail, as the drum locates onto 3 pads just beneath the drum rim whilst putting the the felt part of the door into the drum at the same time as locating the front panel into the 2 slots at the bottom and also locating the vent tube. WOW it was pretty difficult to line everything up in one go. But could never have achieved it without watching this so thanks.
Excellent instructional video. The step by step process was a great help. I have saved several pounds by following the video. Many thanks. One small tip. The belt was very difficult to stretch over the motor spindle, even using a length of 15mm copper pipe. Finally managed it after warming the belt, in situ, with a hair dryer for several minutes whilst rotating the drum and belt by hand. Mind you I was enacting the repair in a cold utility room. Thanks again guys.
+Derek Stephens I am glad I could help you Derek with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/TH-cam. th-cam.com/users/Apart4uFacebook. facebook.com/how.to.repair.appliances
Thanks for the video. I just repaired mine and the two difficulties I had was getting the new belt onto the motor (even with a tube) and lining up the vent tunnel. I had to remove the other panel to help align it. Took me about an hour to do. You professionals make it look so easy!
Thanks for this tutorial. You saved me a lot of money, time and effort. Your trick with the tube and taking the side off was the winner. I'd managed just about everything else but stretching the belt over the motor had defeated me.
*****Hi stev not easy unless you know how but I am glad I could help you with this problem. Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Followed your instructions and swapped the belt thank you. Was a bit stiff getting belt on the motor. Swapped the bearing at the same time and it's like new. Had to run it a while empty to get the drum to spin.
check pipe work for blockages and pump filter Iam Glad we could help you Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Excellent tutorial. Just done this. Only downside is that I didn't have a piece of metal tube, but I found a 1/2" socket extension worked just as well.
Excellent video - especially the trick using the pipe to locate the belt onto the motor spindle; that really helped! Just finished replacing my tumble dryer belt - thank you!
Glad you managed to get the dryer sorted, no skin off your hands I hope @glidecam40 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Followed these fantastic tutorials as best I could. Took all the screws out and all the sides fell off so it's been sitting in the hallway for 2 days, looking like something out of Wall-E. Now my wife tells me it's a new tumble drier or she walks.
Fantastic tutorial, so easy to follow, the step by step was so simple and as mentioned before, saved a fortune. Many thanks and keep up the great guides. The belt does take a few minutes to get right and the grooves correspond to the drive, so really obvious.
Thanks mate, great video! I have an Indesit IDVA 735, and it looks similar enough (apart from the front panel buttons). I didn't get hold of the new belt yet so I don't know how hard it is to put in place. I gathered from various forums that it was very hard. I'll definitely use the tube trick. Thanks again from France!
Thank you so much. It now works. Took me some time as it was very difficult to put the belt as I do not have much strength. Finally managed by removing the front entirely so I could bend the drum, and removing entirely the big exhaust. It was quite a job to put it all back together but required less strength than your method. Still, I'm very grateful. Thanks again.
+No Name I am glad I could help you with this problem. Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Fantastic video! Saved us a load of money. The new belt went on quite easily using the method demonstrated. Definitely easier as a two person job though, particularly locating the air vent when replacing the front panel. Thank you for posting this!
Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t facebook.com/how.to.repair.appliances/ Stay safe
hi thankyou you saved me £200 it took me 15 mins thanks to your pipe trick (my belt was 6mm smaller than it should have been but still worked) clothes drying as i type. thanks.
glad we could help robert penland this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thanks for the video. A big help. I’ve managed to swap a belt on mine but it really is quite tight on the drum. When I turn the machine on the drum doesn’t turn. Same codes on both of the belts. Any ideas? Thanks.
Great video, very well done. I learned a lot just by watching. My question is that I have an older model, around 2000-2001, cant read any of the numbers on the unit to be more specific for you. I'm praying that the belt will have readable numbers, but do you have a video for the older models of Hotpoint.
excellent video, very simple to follow thankyou so much. I was able to order a new belt and a new heater element (it looked to be in need of replacing too) .. all for £30.
Many thanks for your video! Have managed to get the belt back on but when reassembling it looks like the drum is sitting towards the back and doesn't spin easily? What have I done wrong? Thanks.
We managed to put belt on and it was making a noise but not turning drum then realized looking at video again that it had to go on that spindle which was hard work for us ladies grandson managed it in the end and now it wont turn at all. Also smells like burning. Why would that be?
Thanks so much mate! Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
followed this video step by step and managed to change the belt on my TVM570 dryer, working well but next day the drum started squeaking, only happens once the dryer has heated up, any suggestions would be great?? keep up the good work cheers :)
Hi have followed all instructions and manage to fit new belt and put back together but when I came to test it it just bleeped at me when I pressed the start button. All the lights are on but just will not start. It was definitely the belt as it had snapped, so was not turning but was heating up and the fan was going so I have obviously done something to it when putting it back together? Help!!!
Very good video really usefull however you stated that its a good idea to check the rear bearing at the same time which I agree with seeing as this is also a major cause of the belt snapping due to drum jamming but you didn't show this in the video
the main reason the bearing and the belt goes is that the design has to much drum tension on them. any way we are not the builders of this appliance only the repairers so here is a video on how to rebuild the drum How to rebuild a tumble dryer that’s not turning or noisy Hotpoint, Indesit, Creda, Ariston etc
Excellent! But now that I am into it, does the groove side of the belt go on the drum? There are two sides - one smooth and the other with ridges. It appears from the video that the ridges go down, but...? Also, my belt is a good 3 cm shorter than the broken used belt. I do hope it stretches the 7-8 cm to the motor spindle and that it does not wreck the machine if it is too tight. Yes, I verified the codes and models. We shall see. Thanks for everything.
It is the groove side down according to another site. But it does seem to want to be on the spindle groove and a little bit of the smooth part in order to remain on the drum marking. I suppose machinery is not perfect like people are, right? lol
oh man I forgot how the face plate was attached and I have the two pieces I never had to dismount. All errors pre video and pre photo of the things in place and during acting out children. It seems to work though. We shall see after a few rolls.
+MrCharliie10 I am glad I could help you with this problem. Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
hi,i own a hotpoint dryer and when in use it smells like something is burning ,also when i open the door on it i can see its getting red like fire in the back,and the if i feel the top its hot also.can anyone tell me what is my problem besides getting another one.
+Rosie Garrett this is either overheating or you may have a problem with the back bearing contact us at site on monday for help. we will need full model number
Would love to see you take a crack at the indesit etc condenser dryer belt. One of the worst Jobs ever I think. The latest one took me nearly 90 minutes today. What a heap!!
How do you stretch the belt ,I have been trying for 3 days with different tools to get the belt over the Moto and I still can't get it anywhere near it.😭
I always thought a facial was something you found on Pornhub or what the beauty therapist gives. Always called it a fascia myself, and you should vacuum, not Hoover, since Hoover is just a brand name even if it has entered the consciousness as a verb too. Apart from that, excellent how to instructions indeed :)
they will go on there just very hard I am glad I could help you with this problem. if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256 Google plus. plus.google.com/+How-2-repair/posts
Struggled with the belt but kept trying and it finally fitted! Many thanks for the phone call !
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
facebook.com/how.to.repair.appliances/
I had the basic idea on how to replace the belt but this video made it a lot easier! Thanks big time!
Glad it helped! Thanks We now have Live Q@A's weekly on our live Show , see our home page th-cam.com/users/How-2-repair for the next date
Great tutorial took us a little longer to connect the belt to the connector but eventually it works
Thanks
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video, thanks. You managed to make the belt location look effortless, but I struggled a bit even with the pipe. As a few have said, aligning the front panel and vent pipe on re-assembly was quite tricky and needed extra hands. Got the job done though and working perfectly so, thank you very much.
The video was excellent, took it apart in the same order as the video, simples! After putting on the belt, which i have to admit nearly gave me a hernia the next bit was extremely intricate and probably needed to show more detail, as the drum locates onto 3 pads just beneath the drum rim whilst putting the the felt part of the door into the drum at the same time as locating the front panel into the 2 slots at the bottom and also locating the vent tube. WOW it was pretty difficult to line everything up in one go. But could never have achieved it without watching this so thanks.
Excellent instructional video. The step by step process was a great help. I have saved several pounds by following the video. Many thanks. One small tip. The belt was very difficult to stretch over the motor spindle, even using a length of 15mm copper pipe. Finally managed it after warming the belt, in situ, with a hair dryer for several minutes whilst rotating the drum and belt by hand. Mind you I was enacting the repair in a cold utility room. Thanks again guys.
+Derek Stephens I am glad I could help you Derek with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/TH-cam. th-cam.com/users/Apart4uFacebook.
facebook.com/how.to.repair.appliances
Thanks for the video. I just repaired mine and the two difficulties I had was getting the new belt onto the motor (even with a tube) and lining up the vent tunnel. I had to remove the other panel to help align it. Took me about an hour to do. You professionals make it look so easy!
Thanks for this tutorial. You saved me a lot of money, time and effort. Your trick with the tube and taking the side off was the winner. I'd managed just about everything else but stretching the belt over the motor had defeated me.
*****Hi stev not easy unless you know how but I am glad I could help you with this problem.
Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
excellent video its going to save me a load of time trying to work out how to get to the belt/motor, they don't make it easy
Followed your instructions and swapped the belt thank you. Was a bit stiff getting belt on the motor. Swapped the bearing at the same time and it's like new. Had to run it a while empty to get the drum to spin.
check pipe work for blockages and pump filter
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Excellent tutorial. Just done this. Only downside is that I didn't have a piece of metal tube, but I found a 1/2" socket extension worked just as well.
Excellent video - especially the trick using the pipe to locate the belt onto the motor spindle; that really helped! Just finished replacing my tumble dryer belt - thank you!
Glad you managed to get the dryer sorted, no skin off your hands I hope @glidecam40 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Followed these fantastic tutorials as best I could. Took all the screws out and all the sides fell off so it's been sitting in the hallway for 2 days, looking like something out of Wall-E. Now my wife tells me it's a new tumble drier or she walks.
Get a new wife
Fantastic tutorial, so easy to follow, the step by step was so simple and as mentioned before, saved a fortune. Many thanks and keep up the great guides.
The belt does take a few minutes to get right and the grooves correspond to the drive, so really obvious.
Thanks mate, great video!
I have an Indesit IDVA 735, and it looks similar enough (apart from the front panel buttons).
I didn't get hold of the new belt yet so I don't know how hard it is to put in place. I gathered from various forums that it was very hard. I'll definitely use the tube trick.
Thanks again from France!
Couldn't get belt on drive shaft, trick with the metal pipe worked. Thanks
Brilliant video. I've never tried anything like this before.... I now have a working drier again 😀👍🏻
Excellent video and very well explained. I never did anything like this before and I changed the belt just by watching this video. 👍👍
Fantastic ! Brilliant instructions, fan belt replaced and tumbler working ! Thanks a million from Argentina
Excellent video, saved me a fortune, hard work gettin belt on motor, but once on works perfect.. Thanks alot guys
Thank you so much. It now works. Took me some time as it was very difficult to put the belt as I do not have much strength. Finally managed by removing the front entirely so I could bend the drum, and removing entirely the big exhaust. It was quite a job to put it all back together but required less strength than your method. Still, I'm very grateful. Thanks again.
+No Name I am glad I could help you with this problem.
Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Fantastic video! Saved us a load of money. The new belt went on quite easily using the method demonstrated. Definitely easier as a two person job though, particularly locating the air vent when replacing the front panel. Thank you for posting this!
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
facebook.com/how.to.repair.appliances/
Stay safe
Thanks saved me a few quid . The belt on mine was a little tighter than the one shown but managed to do it the way you showed.
Cheers.
hi thankyou you saved me £200 it took me 15 mins thanks to your pipe trick (my belt was 6mm smaller than it should have been but still worked) clothes drying as i type. thanks.
Great video - concise, easy to follow, got my dryer repaired repaired quickly following advice on this video. Thank you very much :)
Thank you so much. Totally saved a fortune and just fit new belt myself. No more over loading for me.😆
Made that way easier thank you
glad we could help robert penland this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thanks for the video. A big help. I’ve managed to swap a belt on mine but it really is quite tight on the drum. When I turn the machine on the drum doesn’t turn. Same codes on both of the belts. Any ideas? Thanks.
Great video, very well done. I learned a lot just by watching. My question is that I have an older model, around 2000-2001, cant read any of the numbers on the unit to be more specific for you. I'm praying that the belt will have readable numbers, but do you have a video for the older models of Hotpoint.
Excellent tutorial. Same model as mine so a broken belt can be replaced now, cheers. Subbed.
I'm very glad we could help you remember we always have a show once a week life and if you ever need further assistance just feel free to contact us
Thank you very much for the video, saved alot of money on an engineer fitting for me.
+Frankie BP i am glad we could help you
excellent video, very simple to follow thankyou so much. I was able to order a new belt and a new heater element (it looked to be in need of replacing too) .. all for £30.
Love the pipe trick! The last belt I fitted almost amputated a finger putting it on the motor spindle.
Brilliant video! Shown me exactly how to change my dryers belt! Very educational. Thank you!
Many thanks for your video! Have managed to get the belt back on but when reassembling it looks like the drum is sitting towards the back and doesn't spin easily? What have I done wrong? Thanks.
I want to change my ariston dryers belt the model is A111V but i dont know which belt is going to fix my dryer can u plz telll???
Thanks, this is a great video on how to replace the belt.
We managed to put belt on and it was making a noise but not turning drum then realized looking at video again that it had to go on that spindle which was hard work for us ladies grandson managed it in the end and now it wont turn at all. Also smells like burning. Why would that be?
hi Joe it sounds like you have not got the drum on the front bearings or felt correctly
fairplay buddy great demo our dryer is back in the game.. happy days thanx again..
Great video just changed the snapped belt on my dryer 🎉
Brilliant video and tips, every credit!
Thanks so much mate! Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/
Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Very helpful! thanks for sharing your knowledge.
That was so helpful other videos told me to un screw all the screws
Thank you. Confidently demonstrated.
8:54 my favorite song
glad you like
Thanks guys what a great help this was .
Thanks for the tutorial but what do you do if you don't have that little steel rod you used to attach the belt to the motor
I used a small piece of 15mm copper pipe
followed this video step by step and managed to change the belt on my TVM570 dryer, working well but next day the drum started squeaking, only happens once the dryer has heated up, any suggestions would be great?? keep up the good work cheers :)
I've done all these steps but when our dryers switched on it makes a horrid screeching noise and still wont turn! Help :(
Hi have followed all instructions and manage to fit new belt and put back together but when I came to test it it just bleeped at me when I pressed the start button. All the lights are on but just will not start. It was definitely the belt as it had snapped, so was not turning but was heating up and the fan was going so I have obviously done something to it when putting it back together? Help!!!
Excellent video. Job Done.
Great video... now have a working dryer again :) thanks
Very good video really usefull however you stated that its a good idea to check the rear bearing at the same time which I agree with seeing as this is also a major cause of the belt snapping due to drum jamming but you didn't show this in the video
the main reason the bearing and the belt goes is that the design has to much drum tension on them. any way we are not the builders of this appliance only the repairers so here is a video on how to rebuild the drum How to rebuild a tumble dryer that’s not turning or noisy Hotpoint, Indesit, Creda, Ariston etc
Excellent! But now that I am into it, does the groove side of the belt go on the drum? There are two sides - one smooth and the other with ridges. It appears from the video that the ridges go down, but...? Also, my belt is a good 3 cm shorter than the broken used belt. I do hope it stretches the 7-8 cm to the motor spindle and that it does not wreck the machine if it is too tight. Yes, I verified the codes and models. We shall see. Thanks for everything.
It is the groove side down according to another site. But it does seem to want to be on the spindle groove and a little bit of the smooth part in order to remain on the drum marking. I suppose machinery is not perfect like people are, right? lol
I had to use a screwdriver. No tube available. It did pull on the motor assembly a bit. I will reassemble and fire it up. Boom!
oh man I forgot how the face plate was attached and I have the two pieces I never had to dismount. All errors pre video and pre photo of the things in place and during acting out children. It seems to work though. We shall see after a few rolls.
I just cannot get the belt over the motor spindle it's impossible I tell you
another perfect tutorial cheers guys
thank allways a lot of work hope it helped how-2-repair.com/buy-paul-a-beer/
Uhv
Very good tutorial, thanks.
where can i get an engineer to do this for me in the croydon area?
Unbelievably hard to stretch the belt on !!! Make it look so easy IT'S NOT !!!
Thanks great help
Whats the belt part number for Ariston model 30616?
nice dryer
Hi sir plzz reply i need a helpppp?????
hi !
super video excellent pour remettre la courroie (belt) thank you
christian
nice one paul !
+MrCharliie10 I am glad I could help you with this problem.
Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
thanks guys that was perfect
hi,i own a hotpoint dryer and when in use it smells like something is burning ,also when i open the door on it i can see its getting red like fire in the back,and the if i feel the top its hot also.can anyone tell me what is my problem besides getting another one.
+Rosie Garrett this is either overheating or you may have a problem with the back bearing contact us at site on monday for help. we will need full model number
Would love to see you take a crack at the indesit etc condenser dryer belt. One of the worst Jobs ever I think. The latest one took me nearly 90 minutes today. What a heap!!
Sir i need a help??
this dryer is a recalled fire risk one
this video can also work for the splendide tvm63x dryer
Nobody on these videos ever explains that you NEED to stretch the belt before installation or you are likely to never get it to fit round the motor
How do you stretch the belt ,I have been trying for 3 days with different tools to get the belt over the Moto and I still can't get it anywhere near it.😭
same to same mashin belt price
I always thought a facial was something you found on Pornhub or what the beauty therapist gives. Always called it a fascia myself, and you should vacuum, not Hoover, since Hoover is just a brand name even if it has entered the consciousness as a verb too. Apart from that, excellent how to instructions indeed :)
My belt won't stretch far
they will go on there just very hard
I am glad I could help you with this problem. if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
😐
Thanks great help