Thank you for this video, I truly appreciate your process for making the speakers. I've made a few sets of speakers, I will use some of your techniques in my future builds. Thanks again!
@Matt man It's a back loaded horn utilizing one fullrange driver, depending on the measurements the speakers may not need a crossover, maybe tuning by adjusting the damping materials. For this specific build, that wire may be just fine. I don't use lamp wire, but that's my preference. Specifically what I appreciated was his use of a routing template to make the slots to insert the pieces of the neck, definitely will make the glue up process a little easier.
@Matt And what are you going to cross over? A single driver system needs no cross over. Unless one needs to roll off the lows or the highs with HPF and/or LPF. As for the cable, whole different discussion.
ну фиг его знает. Колонки из дерева это не есть гут. Даже самые дорогие колонки делают из мдф. Да и вообще... не утопить динамики это какой-то нонсенс на сегодня... и вообще даже на глазок скажу что о таких понятиях как Vas qts и тд.... автор совсем не подозревает.
Hello sir I admire your amazing work! I went to your website and you provide many speaker builds and frequency response too! Amazing. Can you recommend what is the best built for under 13" height speakers. I want to try one. Thank you!
Japan is the home of craftsmanship, experienced in manufacturing helps lots, makes the job lots easier with appropriate tools. Don't like the brown finishing, prefer the natural wood finish. Nice speakers overall.
@regalblue41 - This guy does nice cabinet work but never follows any established design principles. This project looks like a rear loaded horn until the horn exit point which is smaller than the last section of the horn. His double bass reflex enclosure has the primary chamber being smaller than the secondary chamber which I have NEVER seen done. I would suspect that this system would have several resonance peaks and would measure (and maybe in person sound) terrible. I like single driver, horn and transmission line enclosures but his designs are all odd and questionable and math is never supplied.
無垢材で製作する贅沢さが、趣味のオーディオらしくて、素敵です❣
Very nice work and design. 非常に素晴らしい仕事とデザイン。
端材でここまで隙のないものが作れるのはすごい。おれもこれ欲しいわ。
正に職人の領域ですね。素晴らしいを取り越して凄いです。BOXほしいです。
素晴らしい達成感。
Молодец !!! Я просто наслаждаюсь тем, как человек профессионально работает по дереву !
So beautiful !!! Great work 👏👏👏👏
凄い、凄いの一語、是非生で聞いてみたい。
素材取り、スタイル、仕上げ、満点素敵！
音はともかく加工も仕上げも素晴らしいですね。
👏👏👏👏👏👏👏
Excellent craftsmanship. Love the simplicity of the just five inch driver with a nice compact valve amp and pre amp.
four inch
Sounds bright and clear, nice. Now all it needs is a bass project speaker to complement those.
Something like this th-cam.com/video/0tt3QHRiaRI/w-d-xo.html
you did a wonderful job !!!!
Thank you for this video, I truly appreciate your process for making the speakers. I've made a few sets of speakers, I will use some of your techniques in my future builds. Thanks again!
@Matt man It's a back loaded horn utilizing one fullrange driver, depending on the measurements the speakers may not need a crossover, maybe tuning by adjusting the damping materials. For this specific build, that wire may be just fine. I don't use lamp wire, but that's my preference. Specifically what I appreciated was his use of a routing template to make the slots to insert the pieces of the neck, definitely will make the glue up process a little easier.
@Matt And what are you going to cross over? A single driver system needs no cross over. Unless one needs to roll off the lows or the highs with HPF and/or LPF. As for the cable, whole different discussion.
Great Build! Looks cool!
Bravissimo. Sei un vero artista. Abilità chirurgica come manualità
what a lovely build looks great thanks for posting love it
I like your skills! Good job!
It would be great if you put some captions in English about used materials. Thank you for your videos!!
Amazing work !! MASTER
やべぇ…このボックス欲しい…w
I love FX Audio! :-)
Очень классно получается. Спасибо
Lavoro di altissima qualità maestro
I like Fostex speakers, hopefully the manufacturing will come back to Japan.
Hugo Bloemers i don’t think so, now is made in china since 10 years ago ?
Gourgeous woodwork! Doomoarigato, beautiful little pair of horn speakers! Love the Tango music. ; )
Excellent! ,and so enjoyable!!
Your skill is best....
Very nice work and design.
GREAT JOB!!!
Fantastic job.
すごいっす。
one genius of the world... your talent are above. i love watching
you work beautifuly. Greetings from Spain :)
Impressive!!!:)
Amazing speaker
Beautiful 😊
ぼくはデザインに先に目がいってしまいました。砥の粉にはニスとはちがう、渋みがあって、Fostexの白も引き立ちます。アコギとかよく鳴りそうな。
Great work!
English subtitles please!
excelente trabajo!
Subtítulos en Español por favor!
Wonderful work from brazilian fan 🇧🇷🇧🇷🇧🇷🇧🇷
優れる！
the best japan wood technik
Very nice!
内部の仕切りみて、やっぱりそういうバスレフ構造あるんだ、と、思った、ある程度効果的に低音を鳴らす様に考えるとなんか仕掛けが必要だし・・。
動画の工作シーン、工具からして木工プロの人がやってる感じですね、仕上げが綺麗だし。
forse le casse piu ben suonanti fra quelle costruite nei pezzi visionati !! forse ?? anche merito degli altoparlanti !!
Отличная работа
Молодец ! Отличная работа, интерестное видео.
Thank you for this video... very nice work！！
Complimenti da costruttore veramente realizzazione di elevato preggio la mia più profonda stima
목공에 대한 기술, 실력, 장비 등등등....
모두 부럽습니다.
영상 감사합니다.
Очень хорошо делает!!!
ну фиг его знает. Колонки из дерева это не есть гут. Даже самые дорогие колонки делают из мдф. Да и вообще... не утопить динамики это какой-то нонсенс на сегодня... и вообще даже на глазок скажу что о таких понятиях как Vas qts и тд.... автор совсем не подозревает.
@@alexsemushak128 Тем не менее Японская техника одна из лучших!)
Спасибо тебе добрый человек.
Thank you master
Благодарю. Мастерски.
フルレンジは、バランスがいいですよね。昔、パイオニア使ってました。アルテックのスピーカーも、いい音しますよ。
Mis RESPETOS maestro hermoso trabajó saludos desde Villahermosa Tabasco gracias sólo una pregunta qué madera usó
Simplemente EXCELENTE
Nice sound. I am from Indonesia.
Beautiful cabinet! 👍🙏
Nice full range,would like to know how the bass sounds.
Jim Talor
10 cm ...🤔 bass ... th-cam.com/video/i4dPWIhFxTo/w-d-xo.html
you're great.
バックロードホーンの様に見えたのですが、バスレフなのですね？とても贅沢な材料の使い方と仕事の丁寧さ、素晴らしいです。
バックロードだと思いますよ
開口部が狭いので純粋なバックロードではありませんね。
Hello sir I admire your amazing work! I went to your website and you provide many speaker builds and frequency response too! Amazing. Can you recommend what is the best built for under 13" height speakers. I want to try one. Thank you!
Сделано с любовью! Звук трудно оценить!
The excellent typ.
Fui el primero en dar me gusta! Exelente video hermoso diseño y muy buena música! Saludos desde Argentina 🇦🇷
Thank for your share. May i do that with my fullrange Perrless spaeker 30w.
really nice please if you can make one for a 15" woofer if you can, of course, we need bass 🔈🔉🔊🎵🎶😄
Nice craftmanship I love it
But it seems the speakers don't macht with sucht strong boxes
長岡鉄男さんみたい〜
懐かしいですね〜
同じく思い出してw
can you please pass the measurements of the wooden pieces?
nice job do you have the drawings to build the speaker boxes
Hopefully your next project is a subwoofer.
Nice...
Perfect .
---------------------------------------------
Greeting from Hungary :)
Nice Speakers, great Job.
tHANK yOU
Звук шляпный, но как изделие конечно сделано добротно.
D-102（ブックシェルフ型BH）を作った時に開口部を板で塞いで50㎜Φパイプで出口にバスレフポートを作り実験したことがあります。ユニットはFE-108Σでした。バスレフとしては低音が伸びた感じでしたが、低音の音圧が10dBくらい下がってしまい使い物になりませんでした。M0の重いユニット向きの方式かと思います。ダンプドバスレフと音響迷路の中間みたいな感じでしょうか？
Cool song 😎👍👊✊🏼
Japan is the home of craftsmanship, experienced in manufacturing helps lots, makes the job lots easier with appropriate tools. Don't like the brown finishing, prefer the natural wood finish. Nice speakers overall.
Love to have some measurements.
좋네요 이정도 음질이면 다른 오디오가 필요없을듯 해요
SUPER👍🇵🇱
Mantap om, buatin donk..
How do we calculate this cabinet for 8 inch full range speaker
はじめまして。
大変参考になりました。
お使いのトリマーの刃と同じものを入手したいと思います。
入手先と品番を教えて下さい。
japaneze hands......long live JAPAN
Salve vorrei se possibile le misure precise delle casse e il tipo di altoparlanti usati grazie
is this computed or just random shape?
Good
Красивые.
Which speaker is the best in low frequency ?? This one has no bass at all, it sounds dry
@regalblue41 - This guy does nice cabinet work but never follows any established design principles. This project looks like a rear loaded horn until the horn exit point which is smaller than the last section of the horn. His double bass reflex enclosure has the primary chamber being smaller than the secondary chamber which I have NEVER seen done. I would suspect that this system would have several resonance peaks and would measure (and maybe in person sound) terrible. I like single driver, horn and transmission line enclosures but his designs are all odd and questionable and math is never supplied.
Как узнать,какие именно колонки,по мнению автора считаются самыми удачными в плане звука? К дизайну,исполнению и качеству вопросов конечно нет!
это если автор скажет, тогда и будем знать мнение автора)
Would this design work for 30cm subwoofer? Im just curious
With the right T/S parameters, yes. Otherwise make sure the Q is within the right range for a sub like this to work.
What is that soft material inside?
やっとまともなスピーカーユニットを使ってる自作スピーカー製作者が出た‼︎
折角立派なハウジング製作してもダイソーの300円スピーカーからユニット移行しました…てのが多くてがっかりしてました。 Fostex良い音です。
アンプはいいものを使っているの？
電動工具は便利ですね。でも昔の大工さんの手仕事での工具の使いこなしぶりは凄かったですね。
Подписался недавно. Высший класс! Яркий показатель как надо делать.
Как Не надо из незаглушенных материалов....
@@user-3alexvas3 он же не себе делает!
@@user-3alexvas3 для таких малых корпусов - тут избыточная жёсткость.
Он же не s90 из 18ки делает
@@vovan8547 Согласен, играют колонки не айс. Но, чем избыточная жёсткость ухудшает пусть и не лучший звук?
@@mrdisney6871 да ни чем, главное чтобы не было как в колонках от маяка, там где задняя стенка из говна совсем
В баночке это лыжная мазь была?
Подарок от Сталкера)
Молодец
カット済み板セットを売り出してほしいね