Testing Different Burr Sets with the Varia VS3 2nd Gen | Coffee with April
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- This week, we’re testing out different burr sets available for the Varia VS3 Grinder, 2nd generation.
We were lucky enough to have the chance to try out multiple different variants, and we measured their performance when grinding the same coffee on the same grind setting multiple times. Below, you can see the average particle size distribution for each burr set we used:
Hypernova Iridescent Burr Set - D50= 798
Hypernova Ultra Burr Set - D50 = 796
Supernova Burr Set - D50 = 821
We found the Hypernova Iridescent to best fit the April Brewer, and in this video we show you our recommended recipe when using this grinder along side our brewing equipment.
Thank you to BeanBros for providing the VS3 and burr sets we tested in this video. If you are curious about learning more about this grinder, you can find more information here: beanbros.dk/en...
If you're especially curious about the content that we produce, make sure to check out our Patreon as we have several different ways that you can join our community: / patrikrolf
We're always interested in hearing what topics you're most curious to hear us discuss, and Patreon is a great way of reaching out to us if you would like to make a request.
We welcome your thoughts and feelings on the topics raised in this week's video, as well as other ideas you would like to see us discuss in the future. We really appreciate your feedback and support.
You can contact us or our collaborators using any of the channels below:
***********************************
Instagram: / aprilcoffeecph
Webshop: aprilcoffeeroa...
TH-cam: / @coffeewithapril
Podcast: / coffee-with-april
Email: patrikrolf@aprilcoffeeroastery.com / josephfisher@aprilcoffeeroastery.com
Music by Andrew Blumhagen
andrew.blumhagen@gmail.com
/ andrew-blumhagen
andrewblumhage...
Graphics by Chloé Shephard
chloeshephard@hotmail.com
/ chloephotoandbooks
***********************************
Produced by April Media - 2023
I would like to see an indepth review, including blind taste testing, that compares Hypernova Ultra to Hypernova to a control grinder. The control grinder should be a popular and well known grinder. I want to buy either a HNU or HN burr upgrade for VS3G2, but first I need to see performance testing & review.
Thank you for watching. We are sure Lance or James have made something similar on their channels. They are more extensive on their reviews.
Not demanding at all, are you. I want, I I need... lol check yourself
Video looked, and sounded good, but it seemed the presenter wasn't familiar enough with the Varia grinder, and there wasn't a sufficient description of the various coffee notes that the new burrs produced, especially from the other tasters.
Also, it wasn't clear, to me, whether or not you were suggesting adjusting the grinder with or without beans while the grinder was running.
Last, I am new to electric grinders - used hand grinders for years with my moka pot - and currently using an inexpensive electric Oster / Mr Coffee, but in the dozens and dozens of electric grinder reviews / tutorials that I've watched in the last few months, you are the first person that I recall mentioning that you must adjust the grind size while the grinder is running. So that's very interesting to me.
We only aim to show the compatibility between the grinder and the April Brewer. More in-depth reviews you can easily find elsewhere on TH-cam.
Before I finish the video. Welcome to Korea! Hope to see you tomorrow.
EDIT: Im stupid. Hope to see you day after tomorrow.
My varia gen 1 just died, so i asked for a gen 2 replacement… and it died in a week, after stalling of and on for the week. 😢
That's a challenge. Perhaps, look into Timemore Sculptor or the Option-o mini.
Damn your Gen 2 died as well?? Makes me not want to get one.
I’m saving for a weber hg-2, tired of electric for now, back to the hand grinder until then.
@@christophergreen2106 what hand grinder are you using now?
A peugot
Right?! 😅
Every post from Varia & Baristas saying this is espresso focused grinder, not designed for filter coffee.
Thank you for watching.
No here in germany I read it's good for filter too. I want to buy it for using it with filter and espresso
👍👍👍🎉
Can it make coarse grind for cold brew? I’m interested in getting this grinder and their scale for espresso but also cold brew.
I’ve been using this for both Cold Brew and Espresso with no problem
@@lamhoman Great to hear, thanks for info 👍🏽
The inhale sounds OMFG
Thank you for watching.
Do you really need to turn on the grinder in order to change grind size? I never did that...
That's pretty much standard practice on all electrical grinders.
Many grinder manufacturers specifically tell you to never adjust the grind setting whilst it is on.
If you go tighter you could smash the burs together and end your grinder.
The only reason you would turn the grinder on to change the grind size would be if you were going smaller in grind you might catch a bean you didn't know was in there.
But catching a bean is nothing compared to the burs smashing into each other.
@@mansonitefirefox thank you for your input. Our experience is different and we would always recommend it.
@@coffeewithaprilonly if you have a full hopper