As much as I very much enjoy watching the exciting builds/ dyno vids etc, I even more enjoy when you guys make a point to teach or pass on helpful information to your viewers like explaining the importance of grounds and things like that! Keep doing what you're doing!!
Thnk you for motivational massage “Whoever you surround yourself with you become” for some of us is just what we needed to hear. Btw good video as always!!
Good advice! I ran into same issue when painted engine bay on base map would barely start and run. Took die grinder to trans and thermostat ground and fired right up and ran great. It was quite hard to take die grinder to fresh paint though. 😂
I don't know why people don't just put in a ground bolt or 2 onto anything that's going to be painted. That way when it's done being painted it looks good and there isn't any paint under the bolt head. That way there's still a good connection between the frame/motor and the negative terminal on the battery. You just need to mark around the edges of the grounded bolts and then grind off the paint under it with a dermal and you'd be good to go and it would be hidden under the bolt mostly if you did a good job coloring inside the lines lol.
One thing that works well for painting and keeping grounds: At walmart in the stationary section are colored dot stickers that work very well to cover your bolt holes before you paint. They cost like a dollar for a full pack and they clean release. Also using a grinding stone to prepare the surface and coating the parts of the ground in OEM honda lithium dielectric grease to prevent corrosion afterwards. Great video guys yea that car needs one of your modern turbos for sure.
Kenny_Fa5 😣😖 i may wait lil more and get pistons and rods so i dont have to take everything out twice 🤦🏽♂️ thanks bro! I was gonna try to with could head i make better decisions 🙂 gonna make the tsx cu2 k24z3 turbo
I have one of those catch cans on my car when T1 race development was down the street from me were my car was at Phillip Wong Intercrew Auto Salon the first H2B DelSol look him up Kenny. DALLAS TEXAS your not old school if you dont know about those catch cans LOL.
Why don’t you guys Dyno Sauce the Tires with Spray Adhesive Like Brent from PFI Speed Does when a car has too much power? It’s alot safer than having 3 people on top of a car like that. If you break a strap it could turn Dangerous.
My guess is their dyno is above ground and its alot easier to pull straight down and the nurrling on the rollers isn't wore out... My tuner went from in ground to above ground and i never spun again
Mitchell Rodriguez i doubt they leave it outside during the rain. But yes if it’s sitting and not running water will get into the hot side of the turbo and shoot out when you start it up. Leaves shit all over the windshield too lol
These videos are fucking dope. Y'all have great content. Always looking forward to Humble Performance videos. I swear if I was closer, I'd def have y'all help me with my upcoming build. Keep up the content. 👍🏽Huge fan! 🇵🇷
Hey humble performance I have a 94 Acura Integra that was running, I replaced the head gasket and now it has no spark to the engine. Any tips would be helpful.
Yes and i've used a friends off his running integra. Still nothing. I have impedence in the plug wires so they don't need replaced. no spark to the brand new spark plugs
Isn't Copper Better Than Iridium When It Comes To Conducting Power ? I Know Iridium Lasts Longer But Performance Wise Isnt Copper Way Better ? I Remember Nology Used To Make Plugs With Real Solid Silver Cores
I am such a chicken shit, lol. My entire bottom is built and assembled by CSS. I had my head fully built. Ferrara 6000 valve, springs, retainers, valve guids. Bought top of the line everything. I.D. 1700X injectors, on C16, 6266 turbo, 1320 top mount, big fuel system...everything! When the tuner gets to 500 I'm screaming stop and just clean it up. Am I the only one that does this????
I get the vibe you can genuinely tell Alex wants the best for his clients. Seems frustrated that he knows this car has more potential but lack of some minor prepping can really effect the outcome . Great info always great content 👍🏽
How do you guys not carry plugs to sell a customer ? Especially if it’s that common. While it is the customers responsibility, customers are customers... meaning they don’t always know the right thing to do even if it’s in writing. There was a whole lot of frustration that could’ve been saved and not documented to the public had $30 worth of plugs been on hand
funny how those customers that complain... all of a sudden knows it was due to you yet i bet that they cant explain why... if they actually knew the cause and how to fix it.. they wouldnt be bringing their car to you.. theyd be doin it themselves.... i hate those customers...
WHO EVER YOU SURROUND YOURSELF WITH.. THAT'S WHO YOU BECOME!..
Wise Words there Sir!
As much as I very much enjoy watching the exciting builds/ dyno vids etc, I even more enjoy when you guys make a point to teach or pass on helpful information to your viewers like explaining the importance of grounds and things like that! Keep doing what you're doing!!
The intro song is 🔥🔥🔥
FRIDAY THE 13TH TUNE
STILL KILLED IT 700+💪🏾💪🏾💪🏾
That is one gorgeous build! Truly amazing work. I’m jealous. Never thought I’d say this but I want a civic to play with.
They become apart of you
Big up to humble all the time
Great content great advice and great advice and motivation at the very end about what you said about having people around you
Holding it down OG hometown car
Things a beast without a doubt! Good work fellas..i been puttin in work on my race car getting it ready for the season
Humble performance all the way💯🙌🙌
I wish i had people like you guys close to me to help me with my car man
Foreal
Nice civic awesome video! #1 Team!!! Humble Performance work hard stay Humble!!!
Dam that was deep bro... keep your heads up cuz the work u do is top notch
Thnk you for motivational massage “Whoever you surround yourself with you become” for some of us is just what we needed to hear. Btw good video as always!!
Thanks for another video. Now we will take major precaution on making sure all of our grounds are located where they need to be.
Good advice! I ran into same issue when painted engine bay on base map would barely start and run. Took die grinder to trans and thermostat ground and fired right up and ran great. It was quite hard to take die grinder to fresh paint though. 😂
I don't know why people don't just put in a ground bolt or 2 onto anything that's going to be painted. That way when it's done being painted it looks good and there isn't any paint under the bolt head. That way there's still a good connection between the frame/motor and the negative terminal on the battery. You just need to mark around the edges of the grounded bolts and then grind off the paint under it with a dermal and you'd be good to go and it would be hidden under the bolt mostly if you did a good job coloring inside the lines lol.
Nice car.. Keep up the good work. Making me want to get back into the Honda game
One thing that works well for painting and keeping grounds: At walmart in the stationary section are colored dot stickers that work very well to cover your bolt holes before you paint. They cost like a dollar for a full pack and they clean release. Also using a grinding stone to prepare the surface and coating the parts of the ground in OEM honda lithium dielectric grease to prevent corrosion afterwards. Great video guys yea that car needs one of your modern turbos for sure.
Best team out there hands down always making dreams come true #humble performance 🙏🏽
Perfect way to start the day🙏🏽
Looks freaking awesome
Espiritismo Alex. They come for all of us good and bad.
You guys give great info! Always enjoy your vids.
What kind of paint did you use for the interior of that civic homes?
Still missing the 99-00 Iced Teal Pearl K-AWD Turbo Honda CIvic Sedan.. that was amazingly clean
Ordered my flywheel to finish my h2b ! Thanks to everyone at humble performance my integra will be Mobbing the streets again!
great job u guys. keep up the good work love what ya'll are doing
Here from Master Thumbnails. That Civic is super clean!!
I wish alex or you wpuld explain what changes are made in between pulls. What little things u are working through..more explanation would be awesome
Hit us with the intro quick time, I wasnt ready :)
What the coupe fuel set up? Keep up the great work
Good advise more please 🙏.
Great advice
Another dope video thanks for the inperatio words Alex🙏🏼
can you change the oil pomp upgrade type s to a k24z without take the engine out?
Yeah its uncomfortable but it's been done.
Kenny_Fa5 😣😖 i may wait lil more and get pistons and rods so i dont have to take everything out twice 🤦🏽♂️ thanks bro! I was gonna try to with could head i make better decisions 🙂 gonna make the tsx cu2 k24z3 turbo
I have one of those catch cans on my car when T1 race development was down the street from me were my car was at Phillip Wong Intercrew Auto Salon the first H2B DelSol look him up Kenny. DALLAS TEXAS your not old school if you dont know about those catch cans LOL.
Stay grounded boys
Why don’t you guys Dyno Sauce the Tires with Spray Adhesive Like Brent from PFI Speed Does when a car has too much power? It’s alot safer than having 3 people on top of a car like that. If you break a strap it could turn Dangerous.
Devinenyc if you can listen carefully the car had ground issues for which it didn’t have any ground connections....
Dyno sauce only to help get traction if the strap break car still running away
Dib Lauj what does that have anything to do with what I said? Cars still spinning tires
BAJAN RELL thats truee
My guess is their dyno is above ground and its alot easier to pull straight down and the nurrling on the rollers isn't wore out... My tuner went from in ground to above ground and i never spun again
Honda Gang
Love the begining banging
Wow. It just looks so right
LET’S GET IT!!!!
Lookin Good 😱🔥
I'm running a demon Neptune should I run radium plugs also
what plugs do u recommend for a 4-500 hp on s300?
T1 release that catch can when you was in diapers! 🤣😂😂
😂👏🤭
I have a chipped ecu as of right now, does it have to be a virgin ecu? For s300
Yes it does
wouldn't rain get inside that integra engine since the exhaust is upwards?
Mitchell Rodriguez i doubt they leave it outside during the rain. But yes if it’s sitting and not running water will get into the hot side of the turbo and shoot out when you start it up. Leaves shit all over the windshield too lol
What size turbo is on the vehicle?
Whats a good responsive turbo kit for around 500whp? I wanted to SC my FG2, but turbo seems a lot better.
These videos are fucking dope. Y'all have great content. Always looking forward to Humble Performance videos. I swear if I was closer, I'd def have y'all help me with my upcoming build. Keep up the content. 👍🏽Huge fan! 🇵🇷
When your only boost controller is the turbo itself
Just found out why my Hondata was twitching out and why my AFR's weren't reading. I had bkr7e's, Switching to iridium plugs!
I am running NGK 4644/BKR7E with hondata s300, are these ok, I have been having problems with my car dropping out of closed loop
Wiper blade delete must suck in the rain
Hope you all are good, alex seems a bit pissed 🤯 ... keep them coming guys 👊
So sick
Birds of a feather flock together
Hey humble performance I have a 94 Acura Integra that was running, I replaced the head gasket and now it has no spark to the engine. Any tips would be helpful.
Nathan Haynes - Have you checked your distributor ?
Yes and i've used a friends off his running integra. Still nothing. I have impedence in the plug wires so they don't need replaced. no spark to the brand new spark plugs
best ending ever right there
😜🤙
Love from #LOU2U2 💜💙
this inspirational speeches getting good
Isn't Copper Better Than Iridium When It Comes To Conducting Power ? I Know Iridium Lasts Longer But Performance Wise Isnt Copper Way Better ? I Remember Nology Used To Make Plugs With Real Solid Silver Cores
I could watch the first minute for 20 minutes.
What turbo is it? S366?
Anthony Billings looks like some old school Turbonetics turbo
Devinenyc when he said wicked wheel referring to the compressor it lead me to believe it’s a BW. Hmm
Bullseye 62mm TCT "BatMoWheel"
Nice vid ! Why do you guys have to be so far from me...I would love for you guys to build me a humble fast car...
I am such a chicken shit, lol. My entire bottom is built and assembled by CSS. I had my head fully built. Ferrara 6000 valve, springs, retainers, valve guids. Bought top of the line everything. I.D. 1700X injectors, on C16, 6266 turbo, 1320 top mount, big fuel system...everything! When the tuner gets to 500 I'm screaming stop and just clean it up. Am I the only one that does this????
Damn i wanted to see more juice ....nice advice
I get the vibe you can genuinely tell Alex wants the best for his clients. Seems frustrated that he knows this car has more potential but lack of some minor prepping can really effect the outcome . Great info always great content 👍🏽
One bad turn n he’s kissing the camera 😂😂😂😂 you od close bro
That is true ALEX 100000000000%%%%%%%%%%%%%
nothing to do with iridium, its non-resistor plugs
EJ not an EK!
How do you guys not carry plugs to sell a customer ? Especially if it’s that common. While it is the customers responsibility, customers are customers... meaning they don’t always know the right thing to do even if it’s in writing. There was a whole lot of frustration that could’ve been saved and not documented to the public had $30 worth of plugs been on hand
We have plugs in stock ... Spark Plugs were switched ...
Why not just sand down some of the paint ,simplicity people , electrical issues are not something to play with .
BighomieJ5x - they cant take that liberty with a customers bay of this condition
@@PolishedMobileDetailing503 oh not humble nah nah, I'm talking bout the owner or the builder who wants electrical gremlins .
Wat is happening over there? you guys are not doing any video!
funny how those customers that complain... all of a sudden knows it was due to you yet i bet that they cant explain why... if they actually knew the cause and how to fix it.. they wouldnt be bringing their car to you.. theyd be doin it themselves.... i hate those customers...
same customers that usually have "their mechanic friend" and dont want to pay you to fix it. shoulda bring it to their friend to tune it then.
when u run with dogs u catch fleas bruuuuuuuh
0.000 ohms on the grounds, anything higher, do it again.
Yeet 1st like