6.Testing All the Modules - Connect All Modules on CYD
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Testing All the Modules - Connect All Modules on CYD
Schematics Link:
drive.google.c...
CYD Schematics macsbug :
macsbug.wordpr...
pr3y/Bruce is a firmware project for the ESP32 microcontroller platform. It's designed for security testing and red team operations.
Important Note:
The use of this software for any illegal or unauthorized activities is strictly prohibited.
Disclaimer: This information is for educational and informational purposes only. I do not endorse or condone any illegal or unethical activities.
Where to find more information:
You can find more details about pr3y/Bruce on its GitHub repository:
github.com/pr3...
#CYD #Bruce #esp32 #CC1101 #pn532 #gpsNeo-6M #RF433 #NRF24 #CYD Launcher - แนวปฏิบัติและการใช้ชีวิต
A small step to create a gerber for the final pcb (KiCad). Thanks for sharing your great project!
Yes, please share with me the files
Well this shows bro's hardwork 💪
😁😁😁
That nice neat box is pretty close now!
😁👍
Wow nice.. continue this project plz
Yes 👍👌
Flipper Zero's brother 😅
Sy gak punya flipper bang😭 ntar nyari dulu
Pertama dapat apa ini omm....😅😅😅😅
Di tunggu next projects nya om,...
Semangat...hehhehe
😁😁😁😁
semangat bang kontennya keren, mirip flipper zero wkwkw
Makasih bang 👍
You should use fritzing for the layout of the electronics, it is much better than photoshop
Yes i better learn fritzing now....
Can you give me the list and the price for the build? Including the screw because i dont know what type of screw is that
Each store has different prices so I didn't list the prices. These are the components needed :
1. CYD ESP32-2432S028
2.NRF24L01
3.CC1101
4. RFID PN532
5. GPS Ublox NEO-6M
6. PCB0100 IR Transmitter
7. TSOP38438 38khz IR Receiver
8. RF433 Receiver
9. RF433 Transmitter
10. 3.7v 1500Mah battery
11. LI ion BMS TP4056 charger
12.Mini boost DC to DC 3.7v to 5v
13.switch six pin (10) switch 3 pin (1)
14 spacer 0.5 cm, 1 cm, and 1,5 cm
Will an atgm336h work for gps? Accidentally ordered that one cause thats what I needed for a different build
If not I'll use it for that project and order the correct one
I haven't tried but you can try it, it have the same pin except pps pin you don't need to connect it
Is it possible to add all these features to the first design of the ESP32 Marauder?
No it cannot, i don't have any skill to change the firmware
@@ARTFOR we cant modify the hardware?
@queenofpein7111 no i can't sorry, modifying the hardware is pointless if the software doesn't support it.
@@ARTFOR sir can you help me with this. can i put a switch in this part of the schematics? The Black dot is where im going to put a switch
drive.google.com/drive/folders/1uRzQc3-qs8a7DCzgZ4HkA47dHtfvAywX
You can do Launcher, So multiple firmwares bassically
Hello, its posible put double nrf24 or double cc1101 for better range or power???
you should probably just get a longer antenna
Same question
I've never tried it but for distance it's better to modify the antenna rather than add a module
You Will get like full duplex, multiplex modulation ať samé time, And stuff, but not range... Fór that you need ideál anthena, or amplifier circuit
How many GB your SDcard bro?
I have 256MB SDCard and the CYD with 2 usb (micro/type-c) but when i restart via "restart" menu the SDcard disappears/unplugged i have to completely remove the power source and plug it again.. inorder for the SD to work again.. i also looked into bruce's source code and try some "fixes" but the problem still persists
also my firmware version is 1.8.2 does your SDCard still works even after restart on "config > restart"? on 1.8.*?
(btw if you gonna try to update it remove the batteries)
I'm using 2Gb SD card
Yes my SD card still work even after restart from config
@ARTFOR okay thank you bro, i'll buy another micro sdcard maybe it's just sdcard issue...
You mean that for update to 1.8.2 i need to disconnect the battery?
Yes, good luck 👌
@@ARTFOR nope, i mean just make sure the cyd doesn't have power from other sources cuz it might burn the board 🥲
Anyone with the cyd got the rdm6300 to work for the 125khz RFID?
🤔🤔🤔
And wifi still works after all that?
Yes still works
tutorial?
This is a tutorial.Please watch from video no.1
Or go to the playlist then select CYD Launcher, that's the complete tutorial
try using a different antenna for 433 mhz
Ok...thanks👍
wow
👋👋👋
I can't understand why in this video (th-cam.com/video/Lr_KmK9HMrw/w-d-xo.html) you use 3V3 for the IR module and in the assembly of all the modules you use 4V6 for the IR module.
Can you explain?
Sure, IR Transmitter operating voltage is 5v and IR Receiver is 3.3v to 5.5v (optional), so to increase the range i decided to use 4.6v all in IR Modules TX and RX
Yes, I saw that after reading the comments 😅
Thx ! 😊
@Thorvald38 you're welcome 👍😁
Place help me 😢
Help what?
@ARTFOR I have other products and they are not connecting
Which city are you from?
@@dilaweraali7213 what kind product?
@@dilaweraali7213 are you from India?
All ranges gue kok gak work ya,tapi kalau di set freq bisa😂
Yang sy justru kebalik, yg all range bisa scan/copy SM squarewave😁😁😁 harus nanya discord BRUCE nih
@ARTFOR berarti punya abng, gak bisa di set freq?😳🤣
@roslinda3492 iya, kaya yang divideo aja😭😭😭, Harus ada yg dioprek lagi kayanya
@@ARTFOR udah di coba di firmware 1.8.1 gak?
@roslinda3492 oh iya belum, udah update ya kelupaan ngoprek modul mulu thanks infonya bang
Hallo Sir
Yes
Can we use esp32 ?
No it can't for now
@@ARTFORFrom beginning is possible?
Its litteraly ESP32.
Yes and TFT LCD Display ILI9341
You can watch from video no.1 if you want from beginning of the project