Keep pushing Matco Scope training classes. The more people jump ship from the Zues the sooner Snap-On will figure out they need to increase the capture rate of their scope. I'm very impressed with the scope and hope ThinkCar keeps up the support. We need more competitors on the market
Great video Brian. I have the Thinktool version of this scope and have only played around with it a little. This video really gives some direction on what the different functions do and what the buttons do.
I really did not understand how the scope worked the other night for the meeting. Now that I played with it I actually like it. It is very powerful as far as sampling and buffer compared to the snappy product. I may make a part 2 and cover what people are saying in the comments of this video.
@@MechanicMindset I did not have any luck, will post a video later. I was not able to get the time rulers to measure in degrees. I may be missing something.
@@BrianMann216 Ah ok, he mentioned something about a math channel which is odd. I do think it’s strange there not being a feature for degree measurement; but this was my conclusion
@@MechanicMindset My Miscig interface looks the same. The math channel wants to pick two channels automatically and I have to deselect the one, I tap on the red symbol and then the cursers read in deg. Also you don't have to bring up the floating box to select the channel, just tap on the colored arrow or touch the wave form and it should switch the cursors to be used on that one.
i have often wondered why other scope manufacturers don't build their scopes like Snapon and ATS where you don't need attenuators? it would make life easier for new ones
What's a good (easy) way to induce a bad CAN signal on an actual car? I've been messing with the one we have at work and demonstrating it to the other techs
I have introduced faults onto live vehicles, but I really don't like to. Just use a low Ohm resistor to ground or positive, AT Your own risk of course, CAN seems to be very forgiving. Just don't want to mess up a car
QUICK-WITTED Hand On Auto Training Brian Mann Happy Easter 🐣 enjoy with all your family around you Hands On Auto Training Brian Mann Tutorial loved it from the start to finish 👍 From Nick Ayivor from London England UK 🇬🇧 ⏰️ 10:09am
Hey Brian! It’s a MicSig scope 😁 Someone pointed this out to me when I did the ThinkTool scope video (so same as TopDon too). Is the Matco diag tool also Launch based then? Cheers
Keep pushing Matco Scope training classes. The more people jump ship from the Zues the sooner Snap-On will figure out they need to increase the capture rate of their scope.
I'm very impressed with the scope and hope ThinkCar keeps up the support. We need more competitors on the market
Yes besides no frequency math channel pretty solid scope. Snappy lagging behind the times for sure.
Great video Brian. I have the Thinktool version of this scope and have only played around with it a little. This video really gives some direction on what the different functions do and what the buttons do.
Your the man Brian.. Thanks for all you are doing with your channel
I appreciate that
great video , same scope as thinktool and topdon.. thanks
I wasn't sure about which one it actually was!
great informative video. guess I should of watched part 1 before commenting on part 2. Oh well thats the way it goes. Have a great weekend 😊
Thanks for the detailed review, Brian. Have a great Easter!
I really did not understand how the scope worked the other night for the meeting. Now that I played with it I actually like it. It is very powerful as far as sampling and buffer compared to the snappy product. I may make a part 2 and cover what people are saying in the comments of this video.
I used multiple setups to make this happen, what particular part? Where are you located?
Thank you
When using the 360/720 deg cursers turn on math. It should bring up an additional curser in deg.
I will try that!!
I noticed this with the ThinkTool version of this scope. I am gonna try too 👍
@@MechanicMindset I did not have any luck, will post a video later. I was not able to get the time rulers to measure in degrees. I may be missing something.
@@BrianMann216 Ah ok, he mentioned something about a math channel which is odd. I do think it’s strange there not being a feature for degree measurement; but this was my conclusion
@@MechanicMindset My Miscig interface looks the same. The math channel wants to pick two channels automatically and I have to deselect the one, I tap on the red symbol and then the cursers read in deg. Also you don't have to bring up the floating box to select the channel, just tap on the colored arrow or touch the wave form and it should switch the cursors to be used on that one.
i have often wondered why other scope manufacturers don't build their scopes like Snapon and ATS where you don't need attenuators? it would make life easier for new ones
Thanks! do you know if this is the same on the Launch Throttle III?
I am not 100% sure but I hear it's a launch
I’m having a hard time connecting the lab scope, is there and manuals or quick set up guides you know about?
What's a good (easy) way to induce a bad CAN signal on an actual car? I've been messing with the one we have at work and demonstrating it to the other techs
I have introduced faults onto live vehicles, but I really don't like to. Just use a low Ohm resistor to ground or positive, AT Your own risk of course, CAN seems to be very forgiving. Just don't want to mess up a car
QUICK-WITTED Hand On Auto Training Brian Mann
Happy Easter 🐣 enjoy with all your family around you Hands On Auto Training Brian Mann
Tutorial loved it from the start to finish
👍
From Nick Ayivor from London England UK 🇬🇧 ⏰️ 10:09am
HAPPY Easter
To the author of this video: can you send me the schematics of your breadboard?
Hey Brian! It’s a MicSig scope 😁 Someone pointed this out to me when I did the ThinkTool scope video (so same as TopDon too).
Is the Matco diag tool also Launch based then? Cheers
Thanks I am about to make up a part 2 follow for all the info that people are showing me in the comments.
@@BrianMann216 Some good info. The degree ruler is a good one!
Looks like a micsig scope
+1 for MigSig Screen Setup - just small differences like start/stop location and such
+1 Micsig scope function🤔
I have been looking around a bit and found the the micsig scope that has a very similar screen. Does Miscig supply them for topdon and thinktool?
THIS TOOLS SCOPE FUNCTION SEEMS TO BE MORE CAPABLE THEN THE SNAP-ON SCOPES EASILY ,,,,,,,,,,,,,,,,,,,,👀👀👀👀👀👀👀👀👀👀👀👀👀👀👀👀👀👀
Yes , only thing I want to see added is to make a frequency math channel, way more powerful than snap on scope other wise