I know I'm late to the party and you may never see this, but beautiful work! I'm contemplating a board build out of Black Walnut, and am scarfing up anything I can find on pedalboard building. Thanks for the video, I thoroughly enjoyed it.
Came here to research ideas for building a pedalboard, I’m now officially quitting music and taking up woodworking......amazing craftsmanship, awesome video!
Very nice. The use of the sled for the angled cuts and the slots for the cross boards has been what I’ve tried to figure out how to do. Nice work with the dowels for the joints too 👌🏻
You can probably do this with less than 50 bucks in tools. Even less if you already own the basic ones like a hand saw and a drill. As I see all I really need is a hand saw, a chisel, a hammer and some sandpaper.
Yup, it will just take longer. I built a book shelf out of pine with a jigsaw, a couple of chisels, a simple right angle square and a 4 oz claw hammer.
incredible. do you have the measurements / plans for this ? what are the dimensions ? i have a friend who wants one, i'm going to try to make him one. thanks
So, no jointing at all? Lately I've seen slot of woodworkers just throw lumber thru the planer without jointing first. I'm asking because I'm debating whether I really need to buy one or not.
Love this! Have been trying to do something very similar. One question: why did you not feel the need to fasten the cross pieces with anything other than glue? Trying to decide if I should do something to make sure they are secure in place
Impressive! Glad I clicked on this and watched. Where did you get the rubber feet for the corners and handle from? Nice little detailed touch. Thanks for sharing
A beatiful work of art for sure. However, a minor criticism: that looks a bit heavy and excessively sturdy. That's not something you perhaps like to carry around small gigs all the time, at least for me. I'd probably build one from plywood, aluminum and quality veneer. Just my 2 cents. Anyway, great work, keep it up.
How heavy would you say this wound up compared to a pedaltrain of roughly the same size? I'm really wanting to build my own but want to make sure it's worth it before I get started. Also great work man that's a beautiful board.
Thanks man. I don’t know how heavy the pedal trains are but this one didn’t seem too heavy to be annoying to carry around. Dimensions were 640 x 320mm. I can’t remember how high it was or the angle, I just played around with it until I thought it looked good
David Larbey it's not bad, it's not great either. The fence has alignment issues and I always to have to re adjust it to make it parallel with the blade. But most table saws in this price range will have the same issue and will perform similarly I think.
Me too haha. I made it for a friend and I haven't actually had a good look at how he set it up. I think the music in the background is Kings of Leon? I could be wrong
Fwiw, with exotic and high oil timbers (walnut for american species), you really should be wearing breathing protection. Exotic woods can actually have non-visible spalting, and breathing that in can make you really sick. As well, many of those timbers are high irritants and can make you ill from that.
i love the straightforwardness of these videos, but i do wish there was some kind of audio, like music the way jacman works does, or maybe some commentary like diresta does, or something. idk. i like the videos though!
Thanks! I do like to add music in my videos when I can. I was listening to music while recording and working so I thought it would get annoying having that as well as other music playing over the top of the video
This "thing" is called pedalboard for guitar players. There are things called "guitar pedals" that guitar players put on top of that thing. They step on those pedal when they want to change the sound of their guitar. The benefit is to have different sounds when you play electric guitar or bass. To understand more, you may search "pedalboard" on youtube.
I know I'm late to the party and you may never see this, but beautiful work!
I'm contemplating a board build out of Black Walnut, and am scarfing up anything I can find on pedalboard building.
Thanks for the video, I thoroughly enjoyed it.
Never too late! All the best for your build! Thanks for the comment!
Best DIY board ive seen, thanks for the inspo
This is my favourite pedalboard design. Absolutely amazing. I was so inspired by it, I have created my own from kwila and pine. Outstanding work mate.
Massive respect for listening to Kings of Leon. Whether that was just the radio or you playing it. Lol. Great work
THIS IS AN ARMORED PEDALBOARD, STATE OF THE ART.... EXCELLENT..!!!
Wonderfull job! I’d stay lot of hours here seeing it!
Its so pretty I wouldn't want to step on it!
Just... wow. The craftsmanship, the attention to detail... That is beautiful work. Looking to start doing this myself, what advice can you give me?
Livingthat Twelvelife thank you! I'd say take your time to plan each step to make sure you get everything right and don't make the wrong cut
advice... get busy
Ryobi commercial
nice contrast between the red and the white,good craftsmanship too!
Came here to research ideas for building a pedalboard, I’m now officially quitting music and taking up woodworking......amazing craftsmanship, awesome video!
haha I'm sure you can do both! Thanks for the comment :D
Very nice. The use of the sled for the angled cuts and the slots for the cross boards has been what I’ve tried to figure out how to do. Nice work with the dowels for the joints too 👌🏻
Simply beautiful! Thanks for sharing
Thanks!
very well built, that will not fall apart!!!
I agree. Nice design and build.
Juicy pedalboard ! like for lo-fi radio !
I'm sure the mahogany and ash wood will improve the guitar tone! lol! Seriously, great work!
This was truly amazing to watch. You sir, are awesome.
And you are too kind!
Wow! Inspired me to make my own!
Damn, this is gorgeous man. Well done.
Thank you!
Looks great. Nice work! 🤓🤘
Its so satisfying I wish I had the tools to do stuff like this
You can probably do this with less than 50 bucks in tools. Even less if you already own the basic ones like a hand saw and a drill. As I see all I really need is a hand saw, a chisel, a hammer and some sandpaper.
Yup, it will just take longer. I built a book shelf out of pine with a jigsaw, a couple of chisels, a simple right angle square and a 4 oz claw hammer.
Spectacular!!! I want one.
Craftsmanship on fire
nice work!
incredible. do you have the measurements / plans for this ? what are the dimensions ?
i have a friend who wants one, i'm going to try to make him one. thanks
Beautiful design 👍
Your pedalboard is incredible, congratulations !!!
The farther away the better, cool.
Congratulations Bro... Very, Very good This pedalboard, I'm Brazil, good job man!
Great job! Great channel! I love it
Wowww...very, very nice work!
👏👏👏👏👏👏😎
excelente trabajo bro, tienes las medidas de la madera?
Dude, this is beautiful!!!
Is that Jazz Vibes playlist? Good job man!
Dang that came out clean! very nice!
Nicely done.
Nice job, its like a work of art and i would almost not want to put pedals on it because it looks so beautiful..
Nicely done sir and gorgeous choice of woods.. :)
beautiful
my plan is repurpose an old briefcase 😅
So, no jointing at all? Lately I've seen slot of woodworkers just throw lumber thru the planer without jointing first. I'm asking because I'm debating whether I really need to buy one or not.
Hi! Could you share the plans in the description? I went to "Get my Plans", but it was not there. Thanks!!
Nice build. Ryobi should sponsor you😏
much too nice to put on the floor at a pub gig!
Perfect!!!
Love this! Have been trying to do something very similar. One question: why did you not feel the need to fasten the cross pieces with anything other than glue? Trying to decide if I should do something to make sure they are secure in place
Thanks! Glue is more than enough to hold it together and it looks cleaner without any fasteners
Excelent!
So much beautiful
Perfection!
Impressive! Glad I clicked on this and watched. Where did you get the rubber feet for the corners and handle from? Nice little detailed touch. Thanks for sharing
Thanks! I found it at a local DIY/electronics store. But I'm sure you can find them on aliexpress
Love the pedalboard. Any chance you could let me know the basic dimensions u used?
Thanks. It was 640 x 320mm
Last Minute Thoughts awesome - bought wood today. Should be fun!
The Offcut hello sir! Very nice job. By the way you didn’t mention the thickness of each part. Around 1” or more?
Awesome
What are his measurements? height, sides, front, back?
Looks awesome, man!! Would love to see how it looks with the pedals on it and how you attached them. Great work!
Thanks! Sadly I didn't get any shots with the pedals on it as I made it for a friend who picked it up once it was finished.
cool project! what a strange way to place the step stool btw ahahha
It is?? Whats wrong with it?? haha
Beautiful! This is perhaps the best one I’ve seen of the DIY pedalboards.
What angle did you use for the rise?
Probably 28°
What an art! Do you do special orders?
Great pedalboard man. Definately one of the slickest builds on yt. Is there any chance you could provide me with rough dimensions for the pedalboard?
I am inspired by your work lol. Would you mind telling me what angle of elevation you used to get that slope?
Awesome work! Why do you not use a dado blade?
How many pedals can you put ok it? Could you write the measurement of the surface?
I think the measurement was 300mm x 600mm. Holds about 10 standard size pedals
A beatiful work of art for sure. However, a minor criticism: that looks a bit heavy and excessively sturdy. That's not something you perhaps like to carry around small gigs all the time, at least for me. I'd probably build one from plywood, aluminum and quality veneer. Just my 2 cents. Anyway, great work, keep it up.
No such thing as too sturdy :)
@@felix.delrubio Of course it does. Mount the power supply under the board, cables go through the gaps between the slats.
How heavy would you say this wound up compared to a pedaltrain of roughly the same size? I'm really wanting to build my own but want to make sure it's worth it before I get started. Also great work man that's a beautiful board.
Also do you remember the dimensions of this board? Or how you decided on an angle?
Thanks man. I don’t know how heavy the pedal trains are but this one didn’t seem too heavy to be annoying to carry around. Dimensions were 640 x 320mm. I can’t remember how high it was or the angle, I just played around with it until I thought it looked good
Just made one roughly the same size in mahogany, I’d be interested to see your solution to routing the cables.
Nice! I made this for a friend so I didn't see how he fed the cables through it.
What miter saw are you using? Thanks for another great video.
Its a Toolshed miter saw. NZ brand
I want to order exactly that one; How much? and I need that shipped to Mexico...
I'm serious.
nossa ficou top
That looks amazing I need one..
Thank you! I do make these to sell :)
Top
trabalho perfeito
Really nice job!
IM me with your price.
I'm about to go ahead with my plywood design unless you can talk me out of it.
How much practice before i can move that fast?
haha just record yourself and speed up the video. then you'll be moving fast
May I have the draft about this?
Topppp....... muito showwwww...
wow so beautiful. but so i think its so heavy
😍😍😍
Muito lindo
can you turn up the volume on those power tools a little bit though pls
What size is the pedalboard?
How do like the Ryobi table saw, looking to buy the same one would appreciate an opinion good , bad or otherwise.
David Larbey it's not bad, it's not great either. The fence has alignment issues and I always to have to re adjust it to make it parallel with the blade. But most table saws in this price range will have the same issue and will perform similarly I think.
That's what I thought when I looked at in Bunnings might have pay more and get the Dewalt
How long does a project like this normally take?
Jason Carlin I Built one and honestly it could be done in a day or maybe three depending on the glue and stain or whatever he coated it with
Dimensions??
640mm x 320mm, he wrote it in a comment awhile ago
Bro.... seriously, that's awesome. The only thing better than the board itself, is the music you had on in the background. WHAT IS THAT!?!
Hahaha Thank you! Check out Chillhop on youtube or spotify. That's what I was listening to. My go-to work music
I'd love to see what you put on it! What's the music at 2:58?
Me too haha. I made it for a friend and I haven't actually had a good look at how he set it up. I think the music in the background is Kings of Leon? I could be wrong
Anyone knows what did he use at 9:47? Please :p
Its danish oil
Does anyone know what size this one is?
it is 600 x 300mm
Fwiw, with exotic and high oil timbers (walnut for american species), you really should be wearing breathing protection. Exotic woods can actually have non-visible spalting, and breathing that in can make you really sick. As well, many of those timbers are high irritants and can make you ill from that.
what are the dimensions?
Thats not a pedalboard. Thats a work of art! So beautiful man. Absolutely stunning...
😍👍🏻😍😍😍😍😍
i love the straightforwardness of these videos, but i do wish there was some kind of audio, like music the way jacman works does, or maybe some commentary like diresta does, or something. idk. i like the videos though!
Thanks! I do like to add music in my videos when I can. I was listening to music while recording and working so I thought it would get annoying having that as well as other music playing over the top of the video
做的不错，工具比我的全。
Что это и с чем едят ???
measurements please
Для чего это ребята ?
I would like this project, in PDF format! Could you send it to my email?
Put on the peddle s. ! ???????
What is this thing
And what benefit it
This "thing" is called pedalboard for guitar players. There are things called "guitar pedals" that guitar players put on top of that thing. They step on those pedal when they want to change the sound of their guitar. The benefit is to have different sounds when you play electric guitar or bass. To understand more, you may search "pedalboard" on youtube.
Thank you very much
I took advantage of new information
Interested in making one and selling it to me ?
Seriously! if any of us could afford half the shit you have in your garage we'd just buy a pedalboard.
머하는도구인지.