Raspberry Pi beehive scale: hardware presentation

Beehive stand loadcell implementation, the beehive is connected to the internet, all readings can be found here: thingspeak.com...
The sensor is compiled from a group of a full-bridge strain gauge, and an HX711 load cell amplifier, measuring range for the sum of four sensors: 50kg*4 = 200kg

[@vojtakliner7605]

Hi, I just started similar project with these weight sensor. But I´m kinda worried about the lifespan of these sensors because they are not designed for a permanent load. Can I ask you, how it works or how long they work fine or in the better case do they still work? Have nice day.
Btw... I really like your design of this project.

[@rayjay43333]

Are you still working on this project. I am very interested in building my own. But I am not a programer

[@icXu]

Hi, there are few tutorials on the internet, basically is a weather station; but if you don't know how to install the software to the Raspberry Pi will be very difficult to have a positive outcome.

[@icXu]

Try this : honey-pi.de/en/

[@shahidgulzar7907]

Hi. Can you please share the wiring diagram. Because in my case it is working on Arduino but shows Random values on Raspberry pi

[@icXu]

Had the same problems, in my case was the pcb

[@shahidgulzar7907]

But same pcb is working with Arduino

[@shahidgulzar7907]

th-cam.com/video/hSHSIkVnewY/w-d-xo.html

[@shahidgulzar7907]

I used the wiring as per this tutorial.th-cam.com/video/LIuf2egMioA/w-d-xo.html And which code did you use. Can you share the repository

[@icXu]

www.instructables.com/Arduino-Bathroom-Scale-With-50-Kg-Load-Cells-and-H/

[@alanalanov4125]

Raspberry Pi for scale ???
))))
who not Mac Pro ))

[@icXu]

It is basically a weather station with scale, which is monitoring the humidity, temperature, and barometric pressure, inside and outside of the beehive; being connected to the thingspeak servers.