How to Replace Electric Fuel Pump 97-06 Toyota Camry
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/65/h/fuel-pump
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn out, faulty or shorted out fuel pump sending unit. This video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, 06 Toyota Camry
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oMN/1AXAA00013
• 8mm Socket 1aau.to/oAT/1AXAA00017
• Ratchet 1aau.to/oNu/1AXAA00016
• Socket Extensions 1aau.to/oFq/1AXAA00015
For More Info visit us at 1aau.to/h/aqD/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
How you know that the fuel pressure regulator mounted in the fuel pump assembly is working properly
I had to watch this video before I replaced my fuel pump in my '98 Camry. I work for an auto parts store out west and a few mechanics I trust said the job would be easy. Your video made the job easier than I thought. Much appreciated from a no-wrench turning guy.
What an awesome design! It is about time someone designed an easy access to a part you know you will eventually need to replace. Thanks for this excellent video. I have purchased several parts for my 1999 Toyota from you and they are very good quality and work well.
Better than any other video I've seen on doing this operation. Thank you
Great! A really really a professional job. Thank you 1A, THE BEST!
The day you can remove & reinstall a fuel pump in under 10 mins litterally wow just wow
If you don't have to remove the tank you can.
Thank you for this Video, I have a 2003 Toyota Camry, engine light is on, Code is for O2 sensor 1 bank 1.. i replaced it, but the light remains on. I replaced the mass air flow sensor, and PCV valve, plugs, air filter, and oil, and Cat. Light remains on, with the same code. So It was suggested I may have LOW fuel pressure. At 225k miles... this video, made my life a lot easier.
Was that the problem?
I just replaced my fuel pump on my 2003 Camry LE. Bought an OEM Denso fuel pump. Done in about hour. Well worth it.
+Leo Thanks for checking us out! 1AAuto.com
@@1AAuto How you know that the fuel pressure regulator mounted in the fuel pump assembly is working properly
They shipped me a part of Christmas eve, how awesome is that. Best company ever.
Excellent video! Helpful and informative.
AND, echoing others, I believe this video should be prefaced with the import and need to depressurize the fuel system first! A noob could follow this video and potentially end up with a horrific spray of gas in the backseat...
When I work on our family's vehicles, I depressurize the line by (1) removing the EFI/fuel pump fuse, then cranking the ignition for about 5-10 seconds, and then (2) cracking open the fuel rail banjo bolt to release any further pressure.
Then, when you disconnect the fuel line at the access port, at the start of this video, only a tiny bit of gas will escape. With gloved hands and paper towels at the ready, you'll be all set.
+@prdr01 Thanks for the tip! We'll pass this info along to our production team.
That was great to know,I have a 1996 Two door Toyota Camry and im changing that exact thing today thanks a million my friend.........
My comments are years late but this is very informative and helpful, I have a '99 Camry ce and until now I had no idea that the feul filter housing was under the back seat, seeing your videos it makes sense now!! Well my Camry was manufactured in Kentucky. I would say that when I put gas in, I notice that the gauge reads slow and after a few minutes then it starts to rise, my question is should I just replace everything instead of just the floater?? You see it 358 thousand plus miles.
Nice video instructions.
Always great training videos the best that I've found keep up the great work.
excellent video. thanks from Sydney
I like the way he explained whith all details.
Thanks for the video
excellent video
+MyHonestOpinion Thank you for your positive feedback! We are happy we could help.
They say Never run gas empty and Never below a 1/4 of a tank. Fuel pump should be emerged in gasoline and not running dry. This will make it wear out quicker. Also when filling tank and gas pump kicks off don't keep filling. Both makes pump wear out quicker.
Is there any way that you can give me a link or list of makes/models that have this pump junkyard doesnt have my exact car & doesnt know which others would have my pump......
Watch for bad crankshaft sensors on this model one way to tell is check engine light wont go out during cranking you wont hear power up buzz on these cars the power up during cranking so be careful diag a bad crank sensor will shut pump off
crank sensor is in distributor on '95 camry, so i got a new distributor. Engine fired right up..
Great video! Perhaps change out the black round filter on the sending unit too.
+Joe T Thanks for checking us out. 1aauto.com
+Joe T Thanks for the great feedback!
What is the torque setting on sending unit screws?
I cannot get my unit to sit flush when I go to re install ? Any tips to get correct assembly ?
I have a V6 01 Camry wagon, but when I pull the seats off its all covered by carpet instead of being open like this. Is it under the carpet or somewhere different?
Awesome video, would of liked to see where the fuse and relay are. Where are they? Thanks.
+c p Refer to your owners manual or a haynes manual and you'll be able to find the fuse box
Hi team, I'm desperate to find more info about the fuel filter that sits near the fuel pump in the fuel sending unit. Can you help? Thanks
There's a leak between the fuel supply tube to the fuel pump (when starting the car). How can I fix this?
I have a 06 Toyota Avalon, the fuel filter says non serviceable. people are saying the fuel filter is in the fuel tank. can you please explain where? or is it part of the fuel pump assembly?
Do u need to drain the fuel if u already have a half a tank
Replaced pump, filters and pressure regulator. Fuel pressure drops, which makes the first start after parking difficult. After reassembly (without replacing anything), the problem goes away for about a year, then returns again. I can't figure out where the leak might be occurring.
I need a routing DIAGRAM for spark plug wires to the two coil packs on my 1997 Toyota Camry 4 cylinder 2.2L motor. Didn't label wires before replacing. Thank you!
Thanks for the video. I have a 96 toyota camry and I cannot find a video for this year. Can you direct me to a video or give me some kind of information on how the fuel sending unit may be different in a 1996?
Alaina H Como Remplazar un Vapor Caniper de un Toyota Camry Le 1997
similar model years..
Overall Good video but he's not using a factory fuel sending unit when he shows you how to remove the pump. Luckily my pump came with instructions with diagrams depicting an OEM fuel sending unit and how to remove it.
Hi I want to know about the filter in the fuel pump
Sir I just bought a new fuel pump and install it after some weeks sitting idol and started again but it's not working what's the problem please
I have a 1997 v6 will this video be the same
+king rush 187 WEST It may be the same or a similar procedure. Here is a link to the fuel pumps that we carry for your vehicle. Hope this helps you out goo.gl/MiDX48
What is the round, black part of this assembly? I am looking for the fuel pressure regulator and am wondering if this is it
Where is the fuel pressure regulator located on a 2000 4 cyl camry?
My camry has leather seats. Do they come off the same way as the ones you did?
+Dave Crupel We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Thanks for the video, I went to your website to buy a fuel pump, but your website has issues went I was checking out, your website doesn't past thru the check out page, so I couldn't complete the transaction. my computer keeps displaying a 1aauto problem in your end.
can you please fix it so I can go and buy the part I need. thanks
+hellanger1 If you experience issues with the website I recommend you call our service department to try and get the order in. 888-844-3393
Great video. What is the life of a fuel pump?. I have a 2006 Camry, I purchased it in 2017 with over 197000 miles on it, and I'm at 204000. It's my wife's work car. I like to replace parts before they give up the ghost.
+Bobby Benn There isn't a set time that parts will last for. Fuel pumps may last the life of the vehicle. Thanks for checking us out! 1AAuto.com
In my personal experience, 200,000 miles or 20 years is when I would replace the fuel pump. Doesn't matter the make or model. I have noticed this over the years with many cars.
If I buy a fuel pump off your website will it still fit even if my cars made in japan?
+Monty Isaac We will have specifications listed on our site so if the vehicles country of origin matters it will have it listed.
The fuel gauge is really slow to correspond after filling the tank. What do you have to replace?
+Zach Marshall The sending unit may be going bad if the fuel gauge has been slowing down during fill-ups. The fuel gauge level sends a signal to the gauge as to how much fuel is in the tank. Hope this helps you out. 1aauto.com
1A Auto Parts thank you very much
by strainer is that the same as a fuel filter i live In Australia maybe we just say it differently? :)
No the strainer connects to the fuel pump assembly
No, the strainer and filter are different. The fuel filter should be in the engine bay under the air box. At least it is on my 2001 V6 Camry
Strainer and fuel filter is different. .. my 2005 Toyota Camry fuel filter in the fuel tank
Where can we buy the adapters?
+Jeremy Harnage You can call 888-844-3393 and our reps can see if we have what fix your vehical
I broke the little cap that goes on the fuel pump itself and I’m having a hard time trying to find out what it’s called. Does anyone know?
Why there is less explanation on how to do things? Like when he put the unit back into the tank, he didn't say be careful or don't worry about the lining up and so....But overall, appreciated for the video.
+Chris Samurai Thank you for watching. We apologize for the minimal explanation on some pieces of the replacement. We will forward this to our Studio in attempt to have this updated. 1aauto.com
Chris Samurai Why u make a video and us how to do it?
Will this work on a 2007
Yes Michelle. It certainly will.
theres two types of fuel pumps, a and b
can i fit that on my 1998 camry ?
+Traw Wilson Thanks for checking us out! If you have the narrow connector on your fuel pump, we do have a replacement for your 98 Camry, the part number is 1AFPU00345. 1aau.to/m/Shop-1AAuto-c
Really good vid! Gas tank and gasoline right under seat and close to my passengers. Scary.
That's in all cars
Before doing anything please check relays and fuses 🤦🏽♂️🤦🏽♂️ I learned the hard way
Before doing this do you need to unplug the battery first ?
+papi kei Yes. It's always best to be safe and disconnect the battery first
@@1AAuto thank you
You should also de-pressurise the system first before opening anything up. To do that you need to unplug the electric cable from the top of the pump, then start the car. It will stall after a second. After that, take the key out, disconnect the negative battery terminal, and then open your fuel filler cap. Then it will be safe to open the fuel pump.
@@anthonygardner9851 thanks
HAHA that connector sure came off easily
Nothing about the rubber seal?
Full instructions can be found on our website, 1A Auto. Thanks for watching. +Zach Vqn
You didn't change out the fuel filter
Thanks for watching out video! +aly 884
Hello
Easy to install but the car would smell like gasoline for months.
I think buddy must have been siphoning his gas out of old farm tractors or something.
That was supposed to be posted on the last video of fuel pump filter plugged. Sorry.
Sorry, but this video is seriously lacking in information. Where’s the instructions to depressurize the system? How about the instruction to disconnect the negative battery terminal? Since you’re teaching noobs, how about safety instructions as you’re letting gas fumes into the vehicle?
How about instructions on alignment of the various parts? And remembering orientation? Remember, you’re teaching guys with limited experience. These things take just seconds but they can make the difference between success and failure, and they will ensure the safety of those who try this replacement.
2:04 bro how do you that Fast