Shur-Line Paint Edger - Cut in Trim Quickly - Does it WORK?
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Is this a useful tool or just a gimmick? For me, I find it useful and takes some of the headache away (and hand cramps) from cutting in trim the old way....with a paintbrush. Everyone has their own opinion, but for me, I like having this tool around to speed up my paint jobs around the house!
--
Don't forget to SUBSCRIBE to see videos first, and LIKE this video if you found it helpful!
Questions? Comments? Throw them in the comments below...let's chat!
--
"If it wasn't hard, everyone would do it. It's the hard that makes it great." ~ Tom Hanks
I really like this tool, have been using it for many years. I have found the best way to put paint on the pad is to put paint in a condiment bottle and squirt the paint on the pad. You can now walk all around the room without the need for a pan.
I had never thought of that! Thanks for the tip!
You mean like a plastic squeeze bottle? That's a great idea. Thanks!
Had the other guy on the ladder to do the high cut ins. Now because of you. I'm going to do the rest today. On a stick.
I didn't have the tine or patience to figure it out and your right. The paint on the wheels to the trim, had me back to the brush in a few secs.
Thanks!
A very lovely "After" job from what I could see.!👍
Great vid with a great smile, cnt wait for mines to come through the post!!
Great helpful video, bought this used it once for primer , Now we should be more comfortable using it on the finish coat in the corners I hate using a brush my hands are all messed up from holding a brush
I used to paint professionally, and was taught how to use a brush to trim, but this is actually a pretty good tool. You have to just keep a few things in mind with this tool. Do not overload it with paint, and definitely brush the excess off like he did prior to placing it on the wall. Do not put too much pressure on it either, just enough to get a clean solid line application. Too much pressure will push the paint out into the guide wheels. Your line is only going to be as straight as the wall you’re against too. Some ceilings can have texture straight to the wall line. This will sometimes be an obstacle, and if you’re not careful, any debris falling from the ceiling edge can end up in your paint line, and don’t rush it either. The tool saves time, but if you’re applying it too fast, it’s easy to get the guide wheels off the line.
Thanks for the tips
Big help. Have used this before and had trouble figuring out what I was doing that got the paint on the wheels.
Thank you.
I bought one, and I wasn't satisfied with it not getting all the way to the edge.
So instead, I went "freestyle" with a 3" brush to cut the edges.
It's honestly simpler and cleaner.
Good vid tho
I had the same experience.
This is good if you can get to the edge. I have an edge I simply can't get to any other way...I need a telescoping rod and edge with threaded base.
It definitely worked for me. As long as you don't overload the paint on it, it works great.
I’m buying one right now.
Very informative and answered all my questions!!! Thanks so much!! (:
Thanks!
I tried this tool recently and I didn’t like it all. I don’t like how it drags across the wall and can still slip and touch the ceiling. I just taped it everything then used the roller as far as it would go in the corner and then did the small edge with a brush.
Thank you so much for this video!
Thank you
I've had these laying around but always do cut in with brush. Tape ALWAYS fails for me...even high dollar tape. Tape seems to pull off paint you were guarding. Thanks. L try all these I have put. Wife loves to buy them at yard sales
low tack tape on say white skirting then paint along the edge next to the wall with the white skirting paint allow to dry the white will bleed under the tape onto the white skirting and seal the tape edge then paint the same edge with your wall colour then peal the tape and you have razor sharp lines
@luc1ferblack Thanks. I'll try it this fall...going to be doing a lot of painting then
Thanks man
Were do u buy this as would like to try it out
Problem is it’s impossible not to get paint on the rollers they them make up the ceiling
good video , Thanks
is this tool available in the uk.?
I just want to know Do you cut in twice once with each coat of paint? I am a new homeowner and want to do it myself to save some money
Yes! Each coat gets cut in.
If you're looking for the how to use, skip to 2:37.
At the end you said to press harder so does that make the lines closer and crisper
Job, sorry.
I’ve used this tool but prefer an angled brush. The Edger tool leaves a strip of old paint between the wall and the trim (or the wall and the ceiling).
Ive been a painter for 42 years. This the best tool ever invented for painter's. I use this to cut ALL my ceilings in, and have for 10 years. It takes time to learn and get a feel for it. But once you do you can cut your cut in time by 3/4.
Even popcorn ceilings?!
I'm a painting contractor too. I use this pad for a lot of my cut ins. I think it actually puts on more paint than a brush does. You just have to watch the hard edge. So I use a whiz to brush it rolled out
@@AWAKENDUSK i don't think i would use it for corners where the paint is matching i could definitely brush a normal corner out quicker by brush. i do plan to try this around window frames and wall/ceiling/baseboard on the project im starting
How’s this for cutting in a long the skirting?
35+ yrs just use a brush.
Easy way to load with paint... use a squeeze bottle filled with paint... squeeze some paint onto the pad, and you're good to go... no constant dipping (or overdipping) in the pan.... easy and clean.
You don't have to refill it often if you brush the paint on. I love it! :)
Great tip, thanks Amanda!
I use a brush or a 4in roller to fill it. And it works way better than dipping it.
I just used again, a couple of days ago. Accent walls, cut in inset curved windows and ceilings. Works well and it’s a lot quicker and easier. I just had a problem with the pad sliding off. Mine is getting old. Fixed that with a piece of sandpaper slid under the edges of the pad holders. Worked great.
Though for £8 worth a try was well worth it with practice
It's a lot quicker if you just lightly roll the paint on the applicator pad instead of dipping it in the paint pan.
I can say honestly, this is the greatest thing ever made for quick cut in. Hands down .
It’s rubbish
To each his own.
Super helpful! I have some wall edges I need to paint and there's no way to get close, but I have a super long telescoping extension rod I can use with the usual threaded end. I need to find these edgers with threads and I'll be in business. Thanks so much!
U were very helpful. Bought the same edger doing it the way you were by dragging the excess paint off really helped me alot.
Been painting for years and I've tried using this thing before. The problem is it leaves a 1-2mm line where the rollers are so I think they're absolutely useless. I can actually see that fine line where you demonstrated in the video. Can you explain how you get rid of that?
So the obvious line where it doesn’t reach the actual edge of the wall, I’m guessing you went back in and used a brush to fix that.
Use your brush to load the pad brushing off the edge. Don’t dip it. You need a brush anyway to get the inside corners. Don’t try to go too far with a load or it will apply too thinly. I use the tilted front edge to swipe down the ridge that tends to squeeze out of the back edge especially if rolling the field is lagging behind.
Don't waste money and time.
Just buy a decent brush.
Have used it on flat walls on our sons place and was very pleased with it. Have yet to try it on our knock down texture walls. Have a whole house to paint so will get a good work out. Have the usual olde guy trembling hands and cutting in is a challenge. That was a reassuring video.
I’m not sure how it will do on textured walls, but unfortunately you’d probably have similar issues regardless of your edging/cut-in method. For the price though, can’t beat saving a little time cutting in around windows, door jams, etc. the only time I’ve run into issues is on thinner baseboard or crown molding where the lip isn’t thick enough to run the edger up against.
Not good for skip troweled walls.
Please do we have this tool available in Ghana?
It seems to leave a slight amount of the wall unpainted
Correct what do in that case?
I got very good edges using this tool but I am also exploring the roller that can do the same. Its still some effort getting it properly soaked and it does'nt move as smooth as roller.
I’ll have to give the roller one a try!
35+ yrs just use a brush.
The better way is to paint in a U shape every time you touch the wall. I'm only painting that way for 10 years now and it always done real good job. Try it! Easy and fast!
Let me explain:
1. Dip the Shure-line pad just a little down the tray;
2. Rub the edge of the tray to remove excess (this will produce uniformity to the pad);
3. Do not apply paint directly to the border;
4. Instead, apply further from the border;
5. Slide to the curb and slide 4 feet along it.
6. To remove the pad, slide away from the edge.
This results in a U shape, where application and removal is done away from the edge. This prevents staining from application/removal.
Have a easy and fast outline painting!
I see that you're using the pads sometimes badly. Surely you do a good job, but with the pads you have the wrong technique. That said without taking anything away from your good work.
Here's how to use the pads properly. Painting by making an inverted U. Let me explain.
FOR A WALL ADJACENT TO A CEILING:
1. Before going against the border, apply the pad on the wall far from the border, then slide it towards the border. It will make an inverted L..
2. Glide the pad evenly with even pressure, you can go either way.
3. To remove the pad, slide it down. This will complete the inverted U. Remove by sliding and not directly as you do, because it produces peaks!!!
TO SOAK PAINT WITH PAINT:
Just immerse the hairs and rub the pad on the edge of the tray, it removes the excess and evens out the paint on the pad.
TO REMOVE EXCESS PAINT ON CASTERS:
Before repeating steps 1 to 3, rub the small rollers on a wall to be painted. It's a good precaution, because sometimes they get dirty. Wipe this part of the wall.
Repeat steps 1 to 3 carefully. I am able to paint a very far wall with pads that fit long sleeves!
FOR CORNERS (junction of 2 walls and a ceiling):
We have no choice but to use the brush, which is the only one going into the nooks and crannies.
FOR ADJACENT WALLS PAINTED THE SAME COLOUR:
Use a roller with one end "closed" completely hairy.
Never again will I make borders with a brush, it's too long and risky.
You need to do a better job explaining what you are saying.
Paint in a U shape every time you touch the wall.
Let me explain:
1. Dip the Shure-line pad just a little down the tray;
2. Rub the edge of the tray to remove excess (this will produce uniformity to the pad);
3. Do not apply paint directly to the border;
4. Instead, apply further from the border;
5. Slide to the curb and slide 4 feet along it.
6. To remove the pad, slide away from the edge.
This results in a U shape, where application and removal is done away from the edge. This prevents staining from application/removal.@@dreid4760
Easiest way is to use a 3 inch roller to roll the paint on the edger instead of dipping it. You're bound to dip it way to far after doing it 700 times.. Lol.. All I take is one oops, and then... F#@&!!!
Thanks for the demo! Just what I needed to see. I've been carefully, slowly painting around the bathroom door jamb with a cotton swab, and it's not very straight (not surprisingly)! I found one of these edgers in the garage with a pack of new pads, so here goes nothing!
I just finished using this tool and it works. Pretty much take your time. It definitely lets you skip prepping. I washed it after use to save it for the next home project.
This video does total justice to this edger... making easy for newbies... other are just paint snobs whobdetest this product ... good job
Bro, you don't need the edger for corners. You need an edger for EDGES, ex: door trim, molding trims....
For me the number one thing is to keep it off the wheels. I do everything like you do except I put more paint on it.
Looks like it still leavees a little gap between the edger and the wall though. How do you get around that?
A lot of painters don't like,I found it to speed up the job in my opinion ...nice video
Pro tip for this tool , apply with brush either on the wall or directly
I can see a space where that junk didn’t cover…..lol.
Where I can get it I'm from Pakistan any online link??
All the walls I paint are textured…so it’s a no go.
How much shur line paint edger
I actually use my brush to coat the pad. My Father used to have me use it that way back when I was a young teenager in the 1980's...That way he could trust me not to screw up!! I still do it that way.Just a thought.
Good thought! Thanks!
Use a paint roller to apply to edger
Does it always leave a small gap?
Cool. I'll try it :) thanks
Just get on with it.
I painted for 2nd home back in 2002 since the walls were all white. This helped me to successfully cut in with great success. I feel like this tool helped me to paint near the ceiling better or as good as a professional painter.
Question: when he cut in I could see 1 or 2 mill of the old light blue colour showing.
I can’t see how even getting the second colour in it would change that as that colour would also be 1 or 2 mill from the edge
Very helpful!! Thanks!!
Hi there amigos l have the best system on the market today the faster sistem ever is backpack paint roller and the edger thanks
Try Using your paint brush and brush it on
Good idea! I’ll give that a try next time!
I use a paint brush as well and it keeps me from accidentally getting paint on the rollers.
ABSOLUTELY L O V E THIS LITTLE GIZMO! Just make sure that you clean it immediately after you are done, or drop it in a bucket of soapy water. So very easy!
I do NOT dip it, I dip a brush in the paint and then spread like that over the edger; more control. Also if you feel you are not close enough to the edge - right after you use it, cut it a little higher with a brush. Terrific little tool. Just keep the rollers clean!!!
Also a great idea!
Helpful ideas. Also please throw away the sleeve less shirts you wore. .
Haha thanks Craig!
Nice shirt
If u ain’t got a steady hand and ur using a dark colour to a white ceiling then cutting in can b a nightmare so if this tools solves that problem what’s not to like
Holy fuck no floor covering...
Modern interior paint comes off extremely easily from everything except carpet
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂brush mate
Could you use it on a long handle to cut in a high wall?