Hey, Amazing tutorial!!! Very detailed and helpful. But does Turbogrid generate a full mesh (of a turbine for example) or just the mesh of one passage? In addition, is it possible to create an animated solution of a transient simulation of 2 different components using CFX (compressor + estator for example), where the mesh files were created in turbogrid?
Turbogrid meshes one airfoil passage at a time. For a single-stage turbine with a stator and rotor, two Turbogrid blocks are required to mesh the entire machine (one for each airfoil row). I have no knowledge on your second question, unfortunately.
How I can make a hub fillet in ANSYS Turbogrid 19.0. I know that it's possible. Where I could have found that option. I looked through and read all of these documentations and wasn't be able to find.
no. But you can mesh internal blade in icem cfd or ansys meshing and import it to CFX Pre. Non con-formal mesh is recommend for heat transfer application.
Thanks for your reply but is it possible to couple one periodic segment of the turbine or the compressor to a full 360 deg housing.. for solid-fluid , fluid,fluid and solid-solid interface in CFX ?? If the entire geometry is used my mesh exceeds 40 million cells .. and your tutorials on ICEM Periodicity is very helpful .. Thank you again
Thank you very much for showing how to adjust control points to remove topology errors! This makes my job much simpler!
happy to hear that
i get this error when transfer date from design modeler to turbo grid how can i fix it
" Application error in turbogrid :curve is empty "
Thanks friend. I have a question
How to get Turbogrid in toolbox for ansys 16.2
Hey,
Amazing tutorial!!! Very detailed and helpful.
But does Turbogrid generate a full mesh (of a turbine for example) or just the mesh of one passage? In addition, is it possible to create an animated solution of a transient simulation of 2 different components using CFX (compressor + estator for example), where the mesh files were created in turbogrid?
Turbogrid meshes one airfoil passage at a time. For a single-stage turbine with a stator and rotor, two Turbogrid blocks are required to mesh the entire machine (one for each airfoil row). I have no knowledge on your second question, unfortunately.
How I can make a hub fillet in ANSYS Turbogrid 19.0. I know that it's possible. Where I could have found that option. I looked through and read all of these documentations and wasn't be able to find.
You can add them in blade editor
hi,where can i find Prat 1?
th-cam.com/video/0Qmm9sKQaFc/w-d-xo.html
@farcfd how we can analyse the performance of axial compressor with modifying the blade
+aditya singh yes sure you can do it
Sir, for my mesh, an error is coming. It says "elements with negative volume detected in domain passage". How to overcome this, please help!!
Go to Blocking > Check/Fix Blocks. Run 'Fix Inverted Blocks' then run 'Check/Fix
There doesn't seem to be any audio at all in this tutorial. It would be much more useful if there were! Can we get some sound?
+Dave Mohr Yes. I will
thanks a lot
Can we mesh the solid blade ?? In turbogrid ?? For Heat transfer ??
no. But you can mesh internal blade in icem cfd or ansys meshing and import it to CFX Pre. Non con-formal mesh is recommend for heat transfer application.
Thanks for your reply but is it possible to couple one periodic segment of the turbine or the compressor to a full 360 deg housing.. for solid-fluid , fluid,fluid and solid-solid interface in CFX ?? If the entire geometry is used my mesh exceeds 40 million cells .. and your tutorials on ICEM Periodicity is very helpful .. Thank you again
Can we do for radial turbine blades?
yes
Can we use turbogrid only for axial turbines analysis? can't it be used for radial turbines?
Hello sir...can u plz send me your blade mesh file?
cannot find it now.
How to reduce maximum aspect ratio in the hub???layers (hub)