How to flash a Naze32 with cleanflight for noobs😉
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Purposely left my mistakes in as learning lessons, this video is for a 15 year old fpv lover and MQC1 Pilot. sent free to a friend in need. Pay it forward someday Jeremy and enjoy. MQC4LIFE
Dude I learned more by watching you in this video than i ever did at my local Hobbytown. Thank you.
MrDevilFlash you don't have to jump the bootloader anymore on either naze. Just make sure the three boxes below the firmware are not checked. Load firmware on line and flash
Sounds like you need the latest drivers. There's a link on the front page of the GUI when you open it
What do I do if I tried bootloading but it still doesn't work? Or is it a specific pin I need to use? I just took some from an old battery
Hello DnaFpv Fpv RC,
Please help, after flashing Naze32 to Cleanflight and calibrating Accelerometer and Magnetometer, the red led light is flashing(blinking). The naze32 is not mounted on the frame and does not have any pins soldered to it yet, What does that red led blinking means ? thanks
Not sure this is really old and outdated but yes two drop downs the first you pick the board the bottom you pick the firmware version
Did you download the cp210x driver? The link is on the front page of the GUI when you open it
Try closing the cleanflight app and unplugging and un powering everything then try again it seems to have a hiccup sometimes First try
mine just keep flasing red and green really quickly after flashing like u did, why is that?
Just getting cleanflight yiu need 14 degrees literally ive been trying to do this for teo weeks lol still can't get on clean flight need more videos on how to get clean flight
Use betaflight now bro
hi, I have installed the same naze32 , but I can receive a D4R ii no telemetry . Do you have any idea?
Is this Cleanflight 1.2.4? I was just wondering because I'm using cleanflight 1.2.4 and the firmware flasher has 2 drop down menus instead of one, "Choose a Board" and "Choose a Firmware Version"
hello Dna Fpv,
can I re-flash naze32 board after everything is connected and soldered to it. It doesn't let me assign modes in Cleanflight, that is why i want to re-flash it ,
thanks for helping
yes, but you need to use the bootloader like he did in the vid with solder, but u dont have to use solder, you can also use pins like most folks do, just look up how to bootload naze 32 on youtube
Hey bro, I have an SpracingF3 (with Naze32 firmware) and i successfully updated it to a the latest cf, but after i followed the directions to the letter, (and I watched a ton of instructional videos b4 i attempted flashing new firmware) anyways, as i was saying after it flashed the latest stable firmware, and it read Successful.,,, i disconnected the usb from the Naze, and then removed the jumper from the boot loader , which should mean that after i insert the usb into the fc again, it should now be out of The DFU mode, but for some reason when i go ahead and try to connect to the fc and what should be the latest verison of CF,, ,but rather than successfully reconnect, instead i get the blinking blue light as if its still in dfu mode, and i didnt even use solder to jump the boot loader,, i just used a paper clip which seemed to work just fine, anyways, ive come to a point where idk what to do, and i would certainly welcome yours and/or amyones help or guidance!! i did look into more videos and I came across a video explaining and used something called a st32 link, used to reflash the firmware from the hex file?! But again,, im lost! Thankx for any help,!
K.D.R.C Kevin D. Sorry bro that sucks. Can you post a video of what your describing to the DNA Fpv page on Facebook it’s much easier to help there and to diagnose with buds but I’m certain we can get you going. This vid is sooo outdated lol start by downloading the betaflight configurator and all drivers in the links on the main page when you open up the betaflight application then it will take us minutes to help after seeing your video
I have followed the tutorial and all went fine -- the throttle is backwards. How do I reverse it?
In your radio's config. Reverse the throttle channel
@@JulienGordon go to ur channels in ur radio. and reverse the throttle channel
That's done in your radio menu on your transmitter
I know this video is old but do you sale naze32 boards flashed with cleanflight
I got one in a kit and it was flashed with cleanflight
no matter what i do i can't get my computer to recognize the exact same board. i've downloaded all the drivers, i have the right cabe, i do everything i'm supposed to. I have 6 of these boards and nothing.
Mark Scott have you downloaded both zadig and ImpulseRc driver fixer?
Hello sir I have bought my first fc naze32 now what should I do to connect to beta flight .should I first update the firmware of the fc.
Nirup MS this video is really outdated now. Most important thing is to make sure you download all the proper drivers. Links are all on the first page when you open the betaflight configurator
Dna Fpv ok after that?
That usually just means it's not getting any receiver inputs and should be normal until you connect and set up your Rx and radio
I'm
Much more available to help on Facebook at
DNA FPV
Wait my srd280 has that cc3d evo how do i flash it
romeo iracheta Cc3d must be flashed through open pilot. Just download betaflight 2.9.7 then go through the firmware tab to flash via openpilot
dude mine keeps saying failed to open serial port
same
.... be sure that you download the drivers for your computers usb port first, otherwise the computer cannot find this device ... there is a driver package on the same site as the clean flight download ... install the drivers and the Naze board, after it is flashed will connect normally.
you are a genios man.
This is outdated now you don't have to jump the bootloader anymore
+DnaFpv Fpv RC You don't have because cleanflight has been improved or because the new naze32 rev6b doesn't required it? I'll build my first quad and installing an naze32 rev5 and wondered if I still have to jump the bootloader.
i think its best to use the boot loader becuase if your using a MS 10 then drivers may be needed to be installed and that a pain in the a--, at least it was for me. Anyone knows of a better way please do tell.
Also this is way out dated you don't have to jump
The boot pins anymore 😁