70inch Outerlimits RC Offshore Racing Boat ~ GTX Hull ~ RC Boat ~ RC Speedboat
ฝัง
- เผยแพร่เมื่อ 22 ก.พ. 2017
- This is one of the first test runs of my GTX hull, which is airbrushed to look like Nigel Hooks 2014 winning World Championship boat "Outerlimits".
This is running with the RMCK Inline Twin S520.
Unfortunately towards the end of this video, because of a sharp turn I perform, the flexi-drive snaps, all part of testing I guess! It was replaced.
Ricks-RC-Powerboats.com
Best hull RC Boat Outerlimits 👍🏻
It turns so realistic. If it were me I'd run a 12s setup. Gas is awesome too but that's me.
Thats looks pretty good.I think you have made a perfekt job.Well done
Cheers :)
WOW, i thought my boat was big! WOW.
out drive has to be set lower in the hull
Have you still got the boat? Would really like to see another video of it!
Remko Jerphanion yes I still have this boat converted to fast electric now will post a video soon
Wry nice, but I think I would have gone with a submerged prop since it’s scale, not a race hull.
hi, what is the range that so a boot can rich? i mean that still can control the boot?
It goes out of sight (a really long way) I’ve never tested how far, because it’s not something I want to risk cheers for your comment
As far as you can see it
Nice hull; where can I get this hull?
Hi Michael, Thanks, im not sure if you can still get this hull now, I got mine through a third party via someone who ran a boat parts website in the UK, the website has been taken down now. However you can get a similar hull, from MHZ in Germany, hope this helps :)
I used to love to run rd boats but was ran off from every place that was big enough to run them so I give it up and I had 6 boats and some of them were really fast and I do miss it cause it was a lot of fun
Nobody owns the water they can go fuck themselves get back into it man and tell people to get fucked
Im interested in building a gas powered boat using a weed eater engine. do you know where I can source a bare hull the size of yours for my project?
Drago the only place I know for a hull this size is Bonzi boats or MHz in Germany as my hull is not available anymore I wouldn’t use a weed eater engine as they are not water cooled go for a zenoah
Bonzi boats are very nice & very expensive! I like to build big gas boats for cheep! I just finished one with a air cooled $45 new 47cc scooter 2 stroke engine, I put it in a plastic toboggan I got from Walmart for $20! It works great!! Mount the engine in the middle of the 50” toboggan to keep porpoising down. See you at the lake!
Ricks rc powerboats where are you based im looking for something similar to this please help
matib1298 hi I got this hull from millpond models that has now close down
If you ever think of selling it let me know. I cant find anywhere in the uk thay sell hulls like this
matib1298 get in touch with Jack hull on Facebook he knows who makes this boat he might be able to help
I have a king of shave p1 56"' V hull rc boat that i bought from someone but it's missing some parts was wondering if u had an idea of what size strut and rudder, trimms, turning blade etc. does it carry and what site i can buy it from ???
Sorry Tony I have not owned the king of shave or seen one so I wouldn’t be any help 👍
In fact, you want somebody for transfering his knowledge for free!
Best would be to join à local club
Where you could share with others
Man you need a four cylinder to push that boat
This boat is now twin fast electric and is very fast so that blows your theory Arnold 👍
@@ricksrcpowerboats5663 glad you got it together a beautiful boat though
Did you lose the prop
Martin Neps no this is a old video the boat is now fast electric with twin motors !!
Something wrong!!
Running way to wet. My guess is the ride pads are hooked. Common problem on fiberglass hulls. Put a straight edge on the ride pads. From the transom forward. If you can see the light between the hull and the straight edge you’ve got hook in your hull. Do you want your serves be perfectly flat. If you have hook fill it & sand it out with body filler. Hook will rob you of so much speed & power it’s ridiculous! Turn the sink water on and gently hold a spoon between your fingers so It can rock back in forth up to the water. Notice how the back of the spoon pushes away from the water that’s called rocker and the front of the spoon sucks the spoon into the water that’s the hook affect. Some boat hulls have rocker which is bad as well and will make your boat run to light on the water..you want flat that’s the goal. See you at the lake!!
This video is over 5years old when I first built it since then the engine was removed and now has a twin prop fast electric set up and runs great thanks for your comment tho 👍
something wrong with that setup
HTJEH this video is a few years old the boat has now got a twin brushless set up
Sounds like you are dragging a weight behind it.. Engine revs don't match the speed. Maybe your prop needs to be lowered. You don't seem to be lacking power
My Buisness this boat is now twin fast electric got rid of the engine !!
Sounds like a weed whip
Weed wacker,dang
It’s a inline twin zenoah engine 57cc not a weed wacker
That's it?? Brushless go brushless man....
I have now 👌🙃
Do you have Video?
No not yet waiting for my custom twin esc to be delivered
So you couldnt properly setup the gas engine so you went Electric and still you make things complicated with a dual ESC...? Ever heard of the KISS method? Sometimes all you need is the right person to accomplish greatness... good luck
No me gustan con motores de combustión son demasiado lentos
Sorry I only speak English this video was taken when I first got the boat since then I have changed it from gas powered to twin fast electric runs 8s on each motor and goes great now 👍
Your rooster tail doesn't match your speed.It looked like I was watching a slow motion video. Lower your propeller.
Since this video was taken this boat was converted to twin fast electric