I don't think there used to be a Belanger tunnel here. I looked at this wash on street view and I couldn't find any trace of there being a conveyor at the exit. There still were Air Canons though, which could mean this replaced a Freestyler, since I saw some red brush material through one of the windows back in October of 2012.
They definitely should not have so much air pressure with the double foam (not calling it tri foam since I didn’t see three colors) application. More air pressure = harder to rinse
Y'all are gonna get hurt very bad someday soon. There are several hazards here: electric shock, entanglement in moving parts, high pressure hydraulic fluid leaks, high pressure water and chemical sprays, chemical burns, flying debris from the drying blowers, pinch points in moving parts....and to top it off, NO eye protection. You NEVER touch moving machinery, you can get a severe electrical shock from worn out equipment, wet motors, wet switches and controls in the moving gantry, step potential shock from the very wet and dirty floors. The chemicals will cause eye damage and are very harmful if they get in your mouth or lungs. Want the footage? set up cameras BEFORE the machine runs, let the cars enter and finish the cycle, THEN retrieve your cameras. And get the owner's permission to film! If you ever get hurt (which you will) or damage the equipment, you will be flat out of luck and held liable. Use your brains before you get hurt or dead. SMH.
I don't think there used to be a Belanger tunnel here. I looked at this wash on street view and I couldn't find any trace of there being a conveyor at the exit. There still were Air Canons though, which could mean this replaced a Freestyler, since I saw some red brush material through one of the windows back in October of 2012.
I just went through it, and they problem fixed, so now that it will spray water when the brushes are spinning.
Will you do the Wenatchee monarch Kirkland R-784 and Burian Voyager?
@@PNWcarwashchannel Already did the R-784 in Kirkland. I will do the Voyager.
@@PNWcarwashchannel😊😊❤😊😊😊😊 keep up the good work sir 😊🤩😊🌯💋
Yeah... that's bad. The brushes need to be dripping wet to wash the car safely.
Agreed
Well, I am soaked from this car wash. They got the water problem fixed.
Is it safe to touch the car wash brushes? I have a premonition that these can chop your fingers off.
Their safe just use caution
If it's moving and you touch it. It'll probably chop off your fingers.
@@JRBowling1997 right, maybe near those rotating lil metal parts and the place where the brushes move, connected to the machine
Yeap 4:46
They definitely should not have so much air pressure with the double foam (not calling it tri foam since I didn’t see three colors) application. More air pressure = harder to rinse
The foam bath and triple foam are now more watery.
That bay type soft touch car wash belongs to a Union 76 gas station.
It’s so sad to see these nostalgic nu-star systems get neglected
The water problem is fixed, and I just went through
That wash unit needs a lot of help..call the owner .tell him the hi pressure hose is leaking..easy fix..
They ended up getting it fixed, just went it.
Very crazy to walk in a moving car wash.
True!
However I was very careful and attentive and did it as safe as possible
I have experience doing as I’ve done it lots of times
I am to.
Y'all are gonna get hurt very bad someday soon. There are several hazards here: electric shock, entanglement in moving parts, high pressure hydraulic fluid leaks, high pressure water and chemical sprays, chemical burns, flying debris from the drying blowers, pinch points in moving parts....and to top it off, NO eye protection. You NEVER touch moving machinery, you can get a severe electrical shock from worn out equipment, wet motors, wet switches and controls in the moving gantry, step potential shock from the very wet and dirty floors. The chemicals will cause eye damage and are very harmful if they get in your mouth or lungs.
Want the footage? set up cameras BEFORE the machine runs, let the cars enter and finish the cycle, THEN retrieve your cameras.
And get the owner's permission to film! If you ever get hurt (which you will) or damage the equipment, you will be flat out of luck and held liable.
Use your brains before you get hurt or dead. SMH.
@@mxslick50someone walked through the Costco car wash
th-cam.com/video/B2t_jFIBlMo/w-d-xo.htmlsi=Me0aJ9pkK4r4Bch2
@@mxslick50especially that lady in the car wash and he’s touching the spinning brush 4:46 when it’s washing customer’s car.
That was definitely not worth the $14.
It is now, LOL! They got that water problem fixed.
l agree
Why does your video get 52k views but mine gets 1.7k? Lol
TH-cam algorithm I’m betting
ABISAI Velazquez GmeVmi