Thanks for the video. Here are some tips that's may help someone... It's been said that a serpentine wrench does not work for this model year. I've had luck using a regular 14 mm flat wrench with a half inch ratchet attached to the open end. It fits perfectly and makes a good cheater bar. No other specialty wrench or hammer 😉needed.
hold the 14mm wrench on the tensioner nut keeping it loosened (or have someone else do it) while you thread the belt on with a serpentine belt kit loaned out from AutoZone/O'Reily, a or long flathead screwdriver as he used in this vid. once the belt is back on you can then let the tensioner tighten back up and the belt will "hug" back onto the pulleys. also its a good idea to spray the groove marks on the pulley with some brake cleaner to keep debris from contaminating the belt.
Turn to Jesus people, he died for your sins. Repent of what the New testament describes as sin. Believe the gospel get baptized and obey the teachings of Jesus. The gospel and the teachings of Jesus are documented in Matthew Mark Luke and John. Jesus is the only way to be saved, if you have faith in Jesus through your faith you will live by his teachings. God bless you all in Jesus name amen praise God
Thanks for the video. Here are some tips that's may help someone... It's been said that a serpentine wrench does not work for this model year. I've had luck using a regular 14 mm flat wrench with a half inch ratchet attached to the open end. It fits perfectly and makes a good cheater bar. No other specialty wrench or hammer 😉needed.
How do you get the belt back on? Its too tight for me when i tried
hold the 14mm wrench on the tensioner nut keeping it loosened (or have someone else do it) while you thread the belt on with a serpentine belt kit loaned out from AutoZone/O'Reily, a or long flathead screwdriver as he used in this vid. once the belt is back on you can then let the tensioner tighten back up and the belt will "hug" back onto the pulleys. also its a good idea to spray the groove marks on the pulley with some brake cleaner to keep debris from contaminating the belt.
Turn to Jesus people, he died for your sins. Repent of what the New testament describes as sin. Believe the gospel get baptized and obey the teachings of Jesus. The gospel and the teachings of Jesus are documented in Matthew Mark Luke and John. Jesus is the only way to be saved, if you have faith in Jesus through your faith you will live by his teachings. God bless you all in Jesus name amen praise God
Good 🤞
If you take off that
Mud shield at bottom. Can you use new clips?
Yes but I highly recommend using the existing ones and be extra careful
You wasted you time videoing this. This could have just been a picture and audio, because I couldn’t tell anything that your doing.
No good