What a fascinating device BT! 🤯 A bit above my budget for a new hobby but I can definitely see the potential benefits in havine one. Thank you for always sharing new and unique content. I learn something new and thought provoking every time! 👏
Thank you - it's always nice to find new things that can provoke and inspire. It's not "cheap" hobby - you need to add material cost and that's what also surprised me a lot - simple wood sheets - to pay few € for one thin A4 size wood plank - it adds up a lot very fast.
Hi man, great video thanks for the very good value information, just one question because I will buy this atomstak x24 laser cut , I want to make stencils with it and the material to use is Mylar, do u know if it work for it? Thanks a mill
Thank you! I think it will work, but you'll definitely have to play with settings (speed vs power) to make sure you have clean cuts as Mylar is a bit thin and looks fragile.
Hey bro I have a question, I have create the squares outline for my photo, I added a design border at the four corner, and the photo in the Centre, I give it a test run , but the border isn’t getting engraved it started engrave from tbd pic , can you please give me a tip , tell me what I’ve done wrong??thanks .much appreciated.
Nice machine. Thanks for beginner-friendly tips and recommendations and I appreciate the safety notes too.
Glad you like it!!!!
Great review! answered all of the questions I have in mind with regards to this laser engraver. Thank you! 🙏🏼
Glad it was helpful!
What a fascinating device BT! 🤯
A bit above my budget for a new hobby but I can definitely see the potential benefits in havine one.
Thank you for always sharing new and unique content. I learn something new and thought provoking every time! 👏
Thank you - it's always nice to find new things that can provoke and inspire. It's not "cheap" hobby - you need to add material cost and that's what also surprised me a lot - simple wood sheets - to pay few € for one thin A4 size wood plank - it adds up a lot very fast.
Hi man, great video thanks for the very good value information, just one question because I will buy this atomstak x24 laser cut , I want to make stencils with it and the material to use is Mylar, do u know if it work for it? Thanks a mill
Thank you! I think it will work, but you'll definitely have to play with settings (speed vs power) to make sure you have clean cuts as Mylar is a bit thin and looks fragile.
I have the 24pro. My timing belt came off. I need instructions on fixing this problem PLEASE.
I have a Two Trees TS2 laser. I really enjoy hobby lasering.
They really can be fun. Two Trees T2 is a bit larger in work area.
Hi there I need some advise , I want to know if I can engrave on surface which has cutouts holes ?? .
Yes, that shouldn't be the problem - if are thinking about same thing. Laser should just pass over the hole and continue engraving on the other side.
Hey bro I have a question, I have create the squares outline for my photo, I added a design border at the four corner, and the photo in the Centre, I give it a test run , but the border isn’t getting engraved it started engrave from tbd pic , can you please give me a tip , tell me what I’ve done wrong??thanks .much appreciated.
wheee I'm part of the 10%
And I must thank you for that :)
@@BeardedTinker Absolutely my pleasure!
Must resist another new hobby….. looks good though!
Tell me about it - I'm about to be kicked out with all of the boxes and stuff... :D