Thanks Cody, I did this and found that the audio cut out every few seconds on the NOAA freqs. You have to go into CPS>Optional Setting>STE and turn off "STE Type of CTCSS" and "STE when no signal" . Also, shouldn't bandwidth be set to 25K for analog channels? '73.
Hi! Thank you for your comment. We invite you to ask your question in our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.
I followed the video verbatim, and I do have an issue. When I change my radio to the local weather channel, 162.525, I see the green light come on but do not hear anything. The only difference from my channel setup screen from the one on the video is that my custom ctcss field on the lower right corner of the window has 251.1. I tried to delete it but it keeps popping back in. Anybody have any ideas why I can't hear the weather channel. Also I left the 12.5k in the band width, but I think this analog channel should be wide at 25k. Thanks for any suggestions.
@@BridgeComSystemsInc Woohoo! That did it. The STE was off, but the weather alert was on. Once I turned that off, I was able to hear the weather. THANK YOU FOR THE RESPONSE!
@@BridgeComSystemsInc I manually turned the weather alert of on the HT. Is there a way to program it in the CPS? I can not find the setting to add it to the code plug. Thank you again!
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
Thanks that worked!!!
Cody you make things look so easy!!!
Thanks Cody, I did this and found that the audio cut out every few seconds on the NOAA freqs. You have to go into CPS>Optional Setting>STE and turn off "STE Type of CTCSS" and "STE when no signal" . Also, shouldn't bandwidth be set to 25K for analog channels? '73.
Hi! Thank you for your comment. We invite you to ask your question in our very large Facebook group. Here's the link to join: facebook.com/groups/BridgeComSystems. Also, please check out our plug-and-play package: www.bridgecomsystems.com/pages/plug-and-play-package.
Literally just figured this out a few minutes ago. Wish I happened on this post two days ago. Thanks for posting!
Do you have the Canadian version of noaa?
We do not have the list of Canadian Weather channels.
I followed the video verbatim, and I do have an issue. When I change my radio to the local weather channel, 162.525, I see the green light come on but do not hear anything. The only difference from my channel setup screen from the one on the video is that my custom ctcss field on the lower right corner of the window has 251.1. I tried to delete it but it keeps popping back in. Anybody have any ideas why I can't hear the weather channel. Also I left the 12.5k in the band width, but I think this analog channel should be wide at 25k. Thanks for any suggestions.
Make sure STE is off and weather alert is off as well. Bandwidth should be 25K
@@BridgeComSystemsInc Woohoo! That did it. The STE was off, but the weather alert was on. Once I turned that off, I was able to hear the weather. THANK YOU FOR THE RESPONSE!
@@BridgeComSystemsInc I manually turned the weather alert of on the HT. Is there a way to program it in the CPS? I can not find the setting to add it to the code plug. Thank you again!