Hi, very informative; is their such a thing as a combined logic analyser/generator for pc use? In the old days you could use a hp 16500b and have generator modules that could be programmed via gpib. This was extremely useful but obviously even now those devices are big and expensive, any thoughts?
Nice overview of a decent little device. What are the triggering options like? I’ve always thought that the Saleae is rather limited in this regard. I keep sticking with my Open Logic Sniffer, which has great triggering for capturing the specific conditions you’re looking for. (It would be useless otherwise, given its tiny 24K capture buffer.)
There is the usual falling edge, rising edge, high and low-level trigger methods. You can also combine multiple triggers in a logic AND condition, wherein sampling starts when all conditions are met.
Thank you sir! I just ordered one from Amazon for $70. I found this quite helpful.
does this work with the pulsview software?
Flying leads rather than shielded micro-coax at those frequencies doesn't really make much sense. Have you tested it at the faster sample rates?
cat: hey hooman what u doin with my stuff?
Hi, very informative; is their such a thing as a combined logic analyser/generator for pc use? In the old days you could use a hp 16500b and have generator modules that could be programmed via gpib. This was extremely useful but obviously even now those devices are big and expensive, any thoughts?
Are you limited to select a specific logic level on >all< pins for a given work case, or can you mix e.g. 3.3V and 5V levels at random??
How well does the 100mhz actually work across USB 2?
Странно, у меня нет настроек PWM. По умолчанию на одном 1кГц 50%, а на другом 100 кГц 50%. Надо покопаться
Very helpful. Thanks 👍
16 channel mode and 16MHz. For 4.608MHz on all channels its bad choice. Glitchs. If on all channels signal frequency
Thanks Steve.
Merhaba. Video için çok teşekkür ederim. Bu cihazdan ben de aldım. CAN Bus nasıl izleyebilirim?
Nice overview of a decent little device. What are the triggering options like? I’ve always thought that the Saleae is rather limited in this regard.
I keep sticking with my Open Logic Sniffer, which has great triggering for capturing the specific conditions you’re looking for. (It would be useless otherwise, given its tiny 24K capture buffer.)
Unfortunately triggers are weak, just like the Saleae.
There is the usual falling edge, rising edge, high and low-level trigger methods. You can also combine multiple triggers in a logic AND condition, wherein sampling starts when all conditions are met.
Sweet! Triggering options?
Could it be used to make cyclic voltammetry experiment?
Chances of getting 100MHz out of this thing with flying leads like these are really close to zero
worthless how do you get this to work software cannot be installed
is this better than the cheap saleae clone? The PWM outputs sum like they would be handy