Nice job mate . This may help or may not . Center line radius times 2 times pie divided by 360 gives you a mm measurement for how pipe to allow per degree of bend . Example my CLR is 165 and it works out to be 2.88 mm of pipe per degree of bend . Or sometimes when it draw it in fusion I draw it as square tube and put a radius on one corner then that will give you a line in the center of your bend to measure. 🤟🏽🤟🏽
That came out mint mate.
Well done 👍🏽
Nice job mate .
This may help or may not .
Center line radius times 2 times pie divided by 360 gives you a mm measurement for how pipe to allow per degree of bend .
Example my CLR is 165 and it works out to be 2.88 mm of pipe per degree of bend .
Or sometimes when it draw it in fusion I draw it as square tube and put a radius on one corner then that will give you a line in the center of your bend to measure.
🤟🏽🤟🏽
Cheers brother. Will try that out.
Good job man!! Thought I'd drop you a message.
Hey good to hear from ya brother. Thanks for that. Appreciate it