Arduino Door Lock using I2C LCD and Keypad
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2020
- Hey guys, in this video I am going to show you how to make a door lock using Arduino.
Arduino Code :
docs.google.com/document/d/14...
Keypad Library:
www.arduinolibraries.info/lib...
I2C LCD Library:
www.arduinolibraries.info/lib...
That's it for today guys I hope you liked the video thanks for watching and don't forget to like, share and subscribe......
#ArduinoDoorLock #DoorLockUsingKeypad #ArduinoBasedDoorLock #ArduinoProjects - วิทยาศาสตร์และเทคโนโลยี
Hey guys !! Pls don't get confused about the intro....
It says Mr. Creative because earlier my channel name used to be Mr. Creative but I changed it to Vector X.
So you may see other videos with this intro.
That's great to see. Not only from a programming perspective, but from an overall engineering one.
Hi Vector X. Great manual :) i'm just a beginner. i wanted to do this project but as lock i got a electromagnet. my coding is still bad :/ could help me to replace the part of your servo for "opennig"/turn of the magnet when entering the right code? thanks a lot in advance for your help
THANK YOU
hello can i use 9v battery as a power source?
Bahut badiya video
Amazing 👍
What about servo.h library? Is it necessary?
Brilliant
Good editing
Yo! It's been while but great video 😊
THANKS BROO!!!!
Hi Armaan ,Daksh here
Do watch my channel
Super bro🔥
Can you do Horloge a base du RTC/keypad/lcd 12C plz
Can u provide the changes in code while using solenoid lock instead of servo motor
Thanks bro
hi, idk why my lcd cannot function. the first one is my keypad and then my after that my port and then now my lcd. after one things happen another things happen too lol
This is nice but can you make this with RFID and LCD.....
It would also look good!!!
Thank you....
👏👏
Hey 👋
M gonna try this after 3weeks and maybe I'll need your help, so ,if you don't mind, could u give me smthg that keeps me in touch with you?
Super... 👌👌👌👌👌
Brilliant!! How can i get in touch with you if i need assistance with mega projects
You can comment on my videos, I will try my best to resolve your problems ; )
Arduino Guru
Can you make this power a relay instead of a servo?
Yaa , I can do that..... I will just have to do some changes in the code !!
If you want the code just let me know...
@@VectorX2712 Ok,thanks!
@@VectorX2712 s bro we want
Coding kar sakate aap
Hey, this is pretty sweet. But for some reason my lcd just shows squares instead of words
Make sure to double check the connections and copy the code properly...
@@VectorX2712 i have the same problem i checked all bui it does not change
change the code at the top where it puts 0x3F and put 0x27
I liked can you make a video how to make a rader
Yes, I am planning to make a video on it too...
hi how did you solder the screen even i have done it but the screen is not responding
When I bought the LCD the I2C module was pre-soldered to the LCD......
Some of pins maybe touching each other , and make sure you double check the connections....
@@VectorX2712 i checked also
Then maybe your LCD is broken, if possible try using a different one...
what is the recommended power source?
Around 12V-2A
Bro, can we extend the wire for long distance?
Yes you can do that...
Ok bro thanks 🙏
Hey bro i need your help my lcd is not working did you use any resistor in lcd
No resister is required, make sure that ur LCD is working(Try uploading a test code and see if the LCD is working)
*This code only works for I2C LCDs
@@VectorX2712 I used the i2c module LCD but my LCD didn't work so I change LCD and I get a new one but there's the same issue as early .
Hey man can you help me out I'm trying to make it but I'm having difficulty
What issues are u facing?
Nowadays keypad door locks are not that fascinating so you try to make it using RFID scanner.....
But nice effort ; )
Hi, I can't use RFID for my project and would like to recreate your opener. Unfortunately, I cannot see the pin assignment in the video and would be happy to receive an assignment plan.
Go to 2:47 in the video,
I have shown the circuit diagram there which shows all the connections !!
Could you upload the Tinkercad link? I wanna try the code
which link are u talking about???
if u want to make circuit diagrams or want to code then you have to creat an account on tinkercad and then go to dashboard and then to circuits. You can make circuits diagram there and if u want to code you can go to code section and code using blocks.
@@VectorX2712 I want the link to the circuit diagram
@@armanpyrbot6539 ohh now i understood
@@armanpyrbot6539 www.tinkercad.com/things/3nm13jAFnES-arduino-door-lock/editel?sharecode=HtCK-6BYyMc0K2-bdU5SPYNvFA_B26kahImA_jzsTJU
Hi! If I want to change the password through the keypad, how do I change the code?
At 3:23 in the video I have shown how to change the password in the code. If you are facing any problem pls let me know in the comments....
@@VectorX2712 I mean change password from keypad not from code. For example press "*" 3 times to change password.
@@haiphamle597 No you cannot do that, btw it's possible after writing some extra code....
But I have no idea how to do that😅😅
There is no circuit diagram
can you give us the schematic diagram, thank you
Go to 2:47 in the video,
I have shown the circuit diagram there which shows all the connections !!
@@VectorX2712 the lcd part isn't very clear tho, could you please show us it would really help
@@simohamedrayeneslimani3418
Lcd Arduino
5V -> 5V
GND -> GND
SDA -> A4
SCL -> A5
@@VectorX2712 i looked it up and i was missing the I2C adapter, i just got one. Thanks a lot it was really helpful
@@simohamedrayeneslimani3418 : )
Sir code denge please
Display connections??? Not see.
Go to 2:47 in the video,
I have shown the circuit diagram there which shows all the connections !!
Tinkercad link pls
This is the link....
www.tinkercad.com/things/3nm13jAFnES-arduino-door-lock
Do watch my other videos too !!
@@VectorX2712 thank you
.
ever since i tried to upload the code my arduino can't upload anything! do you know what happened ?
What is the error that it is showing ?
@@VectorX2712 it's says uploading for like 20min and then like 20 lines of something not responding comes out, no error code tho
@@simohamedrayeneslimani3418 Make sure that your Arduino board is working. Try uploading this sample blink code:
void setup() {
pinMode(LED_BUILTIN, OUTPUT);
}
void loop() {
digitalWrite(LED_BUILTIN, HIGH);
delay(100);
digitalWrite(LED_BUILTIN, LOW);
delay(100);
}
@@VectorX2712 i tried the blink code right away, nothing happened, the arduino works fine on other pcs! the problem is just with mine. And it wasn't like that before i uploaded the code
@@simohamedrayeneslimani3418 Well, I can't do much as I have never encountered anything like this before😓, U can try uploading the code to a different board.....
Bro circuit send plzzzzzz🙏🙏🙏🙏🙏🙏
Go to 2:47 in the video,
I have shown the circuit diagram there which shows all the connections !!
@@VectorX2712 bro circuit diagram not clearly bro plzzz help me bro 🙏🙏🙏🙏🙏
please show display connection properly
Go to 2:47 in the video,
I have shown the circuit diagram there which shows all the connections !!
Can I do with my android mobile,
Yes, with an appropriate app you can!
@@VectorX2712 sir I want to do this for my mini project. There is no requirement of 9v battery
@@Navya__14 Yess you can use a 9v battery to power the system
@@VectorX2712 as per your vedio can i do with out battery...? Sir ,
@@Navya__14 Yess you can do it without battery, but you will have to use a 9v or 12v adapter to power it...
Hi can i have the code?
Code link is in the description....
Super bro, but if i want to put more than 1 password?
how can i do?
I think you can do that, but you need to make some changes to the code
Yes but how bro! 🤭
@@deividspiv6659 I tried to edit the code but it's way more harder that I thought! Maybe you could try it..
@@VectorX2712 Ok tnks bro
There is a problem in my library
What is the problem?
@@VectorX2712 the lcd can't show results while servo and matrix are working
There is no need of battery
Please tell me sir