Classic Mini Cooper RSP Renovation Ep8 -Engine start up attempt

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ต.ค. 2024
  • After a cylinder head rebuild and carb rebuild on my Classic mini RSP mini I attempt a start up.

ความคิดเห็น • 13

  • @JPMergens
    @JPMergens 3 หลายเดือนก่อน

    So glad to see such detailed info as you're working through this. I'd recommend moving the fuel filter before the pump, and also not using a plastic filter in the engine bay. I've done that and had the filter soften and detach while headed down the freeway at 65MPH...Fun times!

    • @MiniJay250
      @MiniJay250  2 หลายเดือนก่อน +1

      Thanks @JPMergens for the comment. My thinking was that as I bungle my way through the renovation work if and when things go wrong if I have covered in enough details I can backtrack and see where things went wrong!

    • @MiniJay250
      @MiniJay250  2 หลายเดือนก่อน

      Will move the filter tho. Thanks

  • @martincunnington2154
    @martincunnington2154 3 หลายเดือนก่อน +1

    Nice one good to hear it running

    • @MiniJay250
      @MiniJay250  3 หลายเดือนก่อน +1

      I really did expect the engine to be dead! So very happy I managed to resurrect it!

    • @martincunnington2154
      @martincunnington2154 3 หลายเดือนก่อน

      @MiniJay250 worth all the work when you hear them start

    • @samday2585
      @samday2585 3 หลายเดือนก่อน

      Nice one Jay 👍🏼

    • @MiniJay250
      @MiniJay250  3 หลายเดือนก่อน

      Cheers I did shock myself!

    • @MiniJay250
      @MiniJay250  3 หลายเดือนก่อน +1

      @@samday2585cheers I was surprised I had convinced myself I was in for an engine rebore!

  • @Polecat54941
    @Polecat54941 2 หลายเดือนก่อน

    Good news, Hard to kill an A series but I can't wait to see this tried with a Tesla sat 20 years in the future!

    • @MiniJay250
      @MiniJay250  2 หลายเดือนก่อน

      Yes given the dire state of the mini after sitting so long it’s a wonder it started again. Today’s cars with their tech will never last as long as period classics. As soon as they stop software updates they will be useless.🤷‍♂️

  • @royjennison3916
    @royjennison3916 3 หลายเดือนก่อน

    WAY too much oil put in that dash pot on the carb , oil pressure , you should have cranked it longer . would have made sense when the head was off , to check crank bearings and big end shells . also check piston ring gap . i would have fitted a new oil pump as they dont cost much if i had stripped it that far . I suspect you are a hobbyist mechanic by your odd tool board behind you . but at least it running in a fashion .

    • @MiniJay250
      @MiniJay250  3 หลายเดือนก่อน

      Cheers, yes just a tinkerer, learning stuff by doing and hoping for the best. Thanks for the advice.