Great video, thanks for posting it. It is so sad to read that the bike was stolen. I had two bikes stolen so I know what it feels. I hope you manage to find it or buy another TMax. Good luck mate.
It's a pity I hadn't seen something like this a few years ago. I sold my 13 reg 530 after a year because it seemed too expensive for dealer servicing and too complicated for diy. I still like my mk2 but may be tempted by a 2nd hand 530 in the future. Thanks for the video,, keep them coming!
Hello i have yamaha tmax 530 2014 model i have problem i listen a sound from drive pulley like a chirp (whistle) you know the reason ? I put lithium grease and i set my belt in the right number.
The 'V-belt' is the belt that runs between the variator and the driven pulley to constantly change the gear ratio on a scooter. It is different from this final drive belt. It is behind engine cover on the right side of the bike.
hi , I have tmax 530 and I want to remove the belt plastic cover and I want to ask you to top plastic from belt If I want to take it out do I need to remove the weel I mean inside part of plastic?
You need to remove the 'Front Cover'. That's the panel underneath the windshield, above the headlights. You pull the top corner edges towards you to unclip, but there is also one small plastic bullet connector going vertically to pin the bottom (above the front mudguard, look up in between the headlights). With panel removed you can reach through and to the bulbs.
Great video, thanks for posting it. It is so sad to read that the bike was stolen. I had two bikes stolen so I know what it feels. I hope you manage to find it or buy another TMax. Good luck mate.
Great Video's . Many thanks for posting . very well demonstrated and good explanation of just how to do these tasks
I ride the same motorcycle. I love your video clip. You seem to have changed your bike. I love Tmax530
Fantastic how to video, great job, keep um coming, maybe a malossi variator and weights installation
It's a pity I hadn't seen something like this a few years ago. I sold my 13 reg 530 after a year because it seemed too expensive for dealer servicing and too complicated for diy. I still like my mk2 but may be tempted by a 2nd hand 530 in the future.
Thanks for the video,, keep them coming!
Thanks for the info
Hello i have yamaha tmax 530 2014 model i have problem i listen a sound from drive pulley like a chirp (whistle) you know the reason ? I put lithium grease and i set my belt in the right number.
4:50 I think that brown stuff is copper grease?? You usually use that on spline shafts like that to reduce wear and keep them from seizing together.
Thanks so much for posting. 😊
The 'V-belt' is the belt that runs between the variator and the driven pulley to constantly change the gear ratio on a scooter. It is different from this final drive belt. It is behind engine cover on the right side of the bike.
Thank you for learning that up. 👍🏻
Clearing
really good
do one exchanging the spark plugs
Please show how to renew rear brake pads on a 2017 TMax DX thanks
does the tmax 530 have a drive belt and a variator belt or just one?
There are 2 belts. The drive belt you see here, and the variator belt which is on the other size of the engine.
hi , I have tmax 530 and I want to remove the belt plastic cover and I want to ask you to top plastic from belt If I want to take it out do I need to remove the weel I mean inside part of plastic?
Yes, you need to take wheel out first, to remove the inner shield.
Tmax thanks....
What Milage do you have to change the belt?
40 k
Nice vidéo.
Could you make one showing how to change the v-belt please??
No as the Tmax was stolen! No more vids.
very sorry to hear that. good luck sir...
Okay, I thought this was the v belt? There's two belts?
still waiting
The bike is stolen, so no new videos
don't suppose you know how to replace a headlight bulb ?????? :-/
You need to remove the 'Front Cover'. That's the panel underneath the windshield, above the headlights. You pull the top corner edges towards you to unclip, but there is also one small plastic bullet connector going vertically to pin the bottom (above the front mudguard, look up in between the headlights). With panel removed you can reach through and to the bulbs.
Tmax top man. Thanks very much 👍🏻👍🏻
Thanks so much .... All done this morning!! :)