I have an ER4 with QOS disabled on a gigabit connection and my Ookla test will reach 900+ Mbps from time to time. I believe I've tested it with QOS on and the Edgerouter was able to handle the workload.
Thank you for the video! If I want to priortize a port, eg for my gaming whilst there are streaming video on another. Should I add another queue and lower the amount of bandwidth for the port that is deprioritized?
I really like your tutorials - they are really easy to understand! 😊 I need to get ready for a FTTH connection and I tried to prepare the router config for that. I have the ER-X. I tried enabling HW offloading and I noticed that the traffic that goes through NAT is not counted on the Dashboard (it simply shows speeds as if the NAT traffic didn't exist). I'm not gonna lie - I was sad when I noticed that I won't be able to monitor usage with HW offloading enabled 😟 Also, in preparation for FTTH I moved the config for the current connection from eth1 to eth2 (eth1 will be fiber) and after I get the fiber I would want them to be configured in failover. I saw your video on the topic but you used the wizard to configure the failover there. I don't want to lose my current config (vlans, etc.), however I'm also afraid to use commands from the Ubiquiti's website because I'm not sure if I understand which ones are needed for me. Would you be able to make a video explaining the process of setting up failover with command line - preferably with explanation of functions of specific commands so that they can be adapted based on needs? And a question about configuring firewall - when moving WAN from eth1 to eth2 I just added eth2 to the interfaces list on the firewall rules that were assigned to eth1. I did not delete eth1 from the firewall rules because it will become the main WAN connection. Is that enough or should I do some additional configuration? To be more specific - the new ISP apparently uses pppoe with packets tagged with vlan so I also added vlan subinterface on eth1, then I added pppoe on that subinterface and I assigned all of them as interfaces on my WAN_IN and WAN_LOCAL firewall rules.
People wont believe but sqm is the strongest part of that router not saying qos doesnt work but sqm is actually stupid strong id even use it over cake qos its so strong
Hi, do you have some good info o how to setup Edgerouter with Iptv, having huge issues with lagging and freezing, have a 500mbit fiber up and down but doesnt help. Using offloading.
Hello. I have a problem with packet loss, it is up to 100% if I turn on a game online and type ping in CLI. Does anyone know the cause and can help? thank you in advance for your answer. Regards :)
If you have 100% packet loss then there is a very serious connection issue somewhere. Try stepping it out and pinging the router, then the router's WAN interface, then your ISP's gateway. See where the disconnect is.
if i have a 100mb download isp connection, would it be advantageous to set port speed on the edgerouter x and my edgeswitch to 100Mb? since pretty much all traffic is going to internet, and throttling traffic at end user device is preferrable? also, my ISP provides 100Mb download but if you dont limit, i can get slightly higher, most likely sucking hard on a straw, which adds latency.
What people usually told me you need to configure the QoS for your worst case scenario to actually make a difference. Never try it my self, but that's the standard answers I hear usually.
Hey toasty, If you throw streaming into the mix on here, 1000/30 cable internet connection . . . Would your recommendation still be to just stick with hardware offload?
For your connection speed, I would definitely recommend sticking with hardware offloading. The device is capable of 1Gbps (TOTAL) with hardware offloading enabled. Check out my Edgerouter speedtest video for specific information, but enabling any service such as QoS will limit the speed significantly. For streaming, you want the most bandwidth possible.
@@ToastyAnswers The ERT-4 actual handles gigabit without hardware offload with no issue. Buffer bloat was just too bad with it enabled. This is purely based on synthetics, so I really don't know if the stream would suffer in any way. I appreciate the reply, though. I'm also using OBS teleport to stream to my laptop which then uses NVENC encoding, so I should have added that is a variable.
The internet speeds here dropped by 50% on my download rate (300 -> 150Mb) after I enable the QOS (D set to 300Mb and U set to 150). Is something to do to improve the download speed? The upload speeds does not changed significantly (set 150Mb and received 140Mb after the QOS)...
The upload speeds don't change very drastically with QoS. Unfortunately, there isn't a lot you can do to increase the speed while running QoS. It is more of a hardware limitation of the Edgerouter itself. You would need to upgrade to a more powerful unit to process QoS at higher speeds. See my Edgerouter vs USG video for more information. I speedtest various edgerouters against Unifi gateways in various configurations.
Not exactly. If your connection is a speed the Edgerouter can handle with QoS then it is definitely beneficial to turn it on. There are just cases where it can cause more harm than good. As long as you know how it will affect things you can run with or without QoS.
It's the built-in Windows 10 Whiteboard. A part of windows Ink... or whatever they're calling it this week. Don't get me started on what they've done to it.
I have a EdgeRouter 10X... Is there a firmware upgrade for these routers? Been using it for around 2 years.. Like the Router set it up according to your video when I first got it. Do you think you could do a video on how to do a firmware update and then resetting up the router? Thanks!
I think a video on firmware updates has been on my list for awhile. I'm hoping to get around to it soon. The latest firmware for any of the Edgerouters is 2.0.9-hotfix.2 which was released almost a year ago in June 2021. Seems to be a lapse in updates recently.
Is this product eol? Do u still recommend this for symmetrical 1gig up and down connections? Or has something else came out that’s better for gig speeds?
The ER-X is not yet end of life, but I would not necessarily recommend one for a symmetrical 1Gbps connection. I go over this in my Edgerouter vs. Security Gateway video as well as my speed test videos. The ER-X is capable of 1gig in a single direction. I would look at the ER-4 for these speeds instead.
Which model of Edgerouter do you have? The offload commands differ depending on the specific model of Edgerouter (some have a switch chip, and others do not). Commands for ER-X, ER-10X, and similar devices (MediaTek-based) set system offload hwnat enable set system offload ipsec enable Commands for ER-4, ER-Lite, and other similar devices (Cavium-based) set system offload ipv4 forwarding enable set system offload ipv4 vlan enable set system offload ipv4 gre enable set system offload ipsec enable
Hi, i have edgerouter x with firmware 2.09. I use wan 1 and wan 2. Wan 2 is starlink. Normal speed in wan 2 is 200mbit of download and 20 of upload. With my ubiquiti router the speed came limited to 60/70 mbit in download, why ? I have enabled/disabled ipsec and hwnat but the problem is always the same. Thanks a lot for the help.
Bro if you are here please help. If I have a large "latency unloaded" (50) during the day, and at night it is small "latency Unloaded" (23), with this switch the latency Unloaded will decrease or the switch only affects "download Active" and bufferfloat. The answer depends on whether I will buy a switch for fiber optic where there is a high latency or whether I will switch to twisted pair where there is a small latency and therefore buy a cheaper switch without optical fiber. ty very much bro u give me chance for good gaming
Whether it’s relevant or not, the x has a great price point of entry for the features it has. It’s not enterprise, but for a home user it’s not a bad piece of kit. I have one for a few years without any issues and it does what I need. If I ever needed improved features, I would consider something else, and I would imagine a lot of other people are in the same boat as me.
ER4 is great for home users. I've used two for two+ years now, VRRP for VIP on two ISP connections. Works great for firewall rules for locking down VLANs, like security cams, or IOT devices. Two cost me less than $350 USD. The alternative is two pfSense boxes from Netgate... you're looking at much more money.
I bought one 1 year ago for a 50/50 4g connection. The sqm qos is one of the main reasons for going with this model. Size (behind sofa in living room) and price was also a factor. I would still buy it today for the connection I'm using it with. For a high speed fiber connection I would probably consider something else.
Thanks for your series on Edgerouter, very informative and great to learn it from you!
could you do a video setting up IPV6 support?
great video.. it greatly improved my latency!
I have an ER4 with QOS disabled on a gigabit connection and my Ookla test will reach 900+ Mbps from time to time. I believe I've tested it with QOS on and the Edgerouter was able to handle the workload.
Thank you for the video! If I want to priortize a port, eg for my gaming whilst there are streaming video on another. Should I add another queue and lower the amount of bandwidth for the port that is deprioritized?
This is how I would accomplish it. If I have a known bandwidth hog, I just hard limit the bandwidth for that device.
Great content as usual!
I really like your tutorials - they are really easy to understand! 😊
I need to get ready for a FTTH connection and I tried to prepare the router config for that. I have the ER-X. I tried enabling HW offloading and I noticed that the traffic that goes through NAT is not counted on the Dashboard (it simply shows speeds as if the NAT traffic didn't exist). I'm not gonna lie - I was sad when I noticed that I won't be able to monitor usage with HW offloading enabled 😟
Also, in preparation for FTTH I moved the config for the current connection from eth1 to eth2 (eth1 will be fiber) and after I get the fiber I would want them to be configured in failover. I saw your video on the topic but you used the wizard to configure the failover there. I don't want to lose my current config (vlans, etc.), however I'm also afraid to use commands from the Ubiquiti's website because I'm not sure if I understand which ones are needed for me. Would you be able to make a video explaining the process of setting up failover with command line - preferably with explanation of functions of specific commands so that they can be adapted based on needs?
And a question about configuring firewall - when moving WAN from eth1 to eth2 I just added eth2 to the interfaces list on the firewall rules that were assigned to eth1. I did not delete eth1 from the firewall rules because it will become the main WAN connection. Is that enough or should I do some additional configuration?
To be more specific - the new ISP apparently uses pppoe with packets tagged with vlan so I also added vlan subinterface on eth1, then I added pppoe on that subinterface and I assigned all of them as interfaces on my WAN_IN and WAN_LOCAL firewall rules.
Some copper connections via CATV Broadband can easily get them symmetrical speeds.
what command for edgemax?
Anyone have any other settings to suggest to change? Love from England
People wont believe but sqm is the strongest part of that router not saying qos doesnt work but sqm is actually stupid strong id even use it over cake qos its so strong
Hi, do you have some good info o how to setup Edgerouter with Iptv, having huge issues with lagging and freezing, have a 500mbit fiber up and down but doesnt help. Using offloading.
I haven't had to set one of these up with iptv.
Hello. I have a problem with packet loss, it is up to 100% if I turn on a game online and type ping in CLI. Does anyone know the cause and can help? thank you in advance for your answer. Regards :)
If you have 100% packet loss then there is a very serious connection issue somewhere. Try stepping it out and pinging the router, then the router's WAN interface, then your ISP's gateway. See where the disconnect is.
if i have a 100mb download isp connection, would it be advantageous to set port speed on the edgerouter x and my edgeswitch to 100Mb? since pretty much all traffic is going to internet, and throttling traffic at end user device is preferrable? also, my ISP provides 100Mb download but if you dont limit, i can get slightly higher, most likely sucking hard on a straw, which adds latency.
What people usually told me you need to configure the QoS for your worst case scenario to actually make a difference. Never try it my self, but that's the standard answers I hear usually.
Hey toasty, If you throw streaming into the mix on here, 1000/30 cable internet connection . . . Would your recommendation still be to just stick with hardware offload?
For your connection speed, I would definitely recommend sticking with hardware offloading. The device is capable of 1Gbps (TOTAL) with hardware offloading enabled. Check out my Edgerouter speedtest video for specific information, but enabling any service such as QoS will limit the speed significantly. For streaming, you want the most bandwidth possible.
@@ToastyAnswers The ERT-4 actual handles gigabit without hardware offload with no issue. Buffer bloat was just too bad with it enabled. This is purely based on synthetics, so I really don't know if the stream would suffer in any way. I appreciate the reply, though. I'm also using OBS teleport to stream to my laptop which then uses NVENC encoding, so I should have added that is a variable.
The internet speeds here dropped by 50% on my download rate (300 -> 150Mb) after I enable the QOS (D set to 300Mb and U set to 150). Is something to do to improve the download speed? The upload speeds does not changed significantly (set 150Mb and received 140Mb after the QOS)...
The upload speeds don't change very drastically with QoS. Unfortunately, there isn't a lot you can do to increase the speed while running QoS. It is more of a hardware limitation of the Edgerouter itself. You would need to upgrade to a more powerful unit to process QoS at higher speeds.
See my Edgerouter vs USG video for more information. I speedtest various edgerouters against Unifi gateways in various configurations.
So for gaming no QOS even though DSL Report reports C in bufferbloat vs A+with QOS?
Not exactly. If your connection is a speed the Edgerouter can handle with QoS then it is definitely beneficial to turn it on. There are just cases where it can cause more harm than good. As long as you know how it will affect things you can run with or without QoS.
Which drawing app did you use at the beginning of the video ?
It's the built-in Windows 10 Whiteboard. A part of windows Ink... or whatever they're calling it this week. Don't get me started on what they've done to it.
Lol who cares
I have a EdgeRouter 10X... Is there a firmware upgrade for these routers? Been using it for around 2 years.. Like the Router set it up according to your video when I first got it. Do you think you could do a video on how to do a firmware update and then resetting up the router? Thanks!
I think a video on firmware updates has been on my list for awhile. I'm hoping to get around to it soon.
The latest firmware for any of the Edgerouters is 2.0.9-hotfix.2 which was released almost a year ago in June 2021. Seems to be a lapse in updates recently.
@@ToastyAnswers Yes I downloaded the update so I at least have it ready to install when you get around to the video. Thanks much appreciated.
THANK YOU SO MUCH
Is this product eol? Do u still recommend this for symmetrical 1gig up and down connections? Or has something else came out that’s better for gig speeds?
The ER-X is not yet end of life, but I would not necessarily recommend one for a symmetrical 1Gbps connection. I go over this in my Edgerouter vs. Security Gateway video as well as my speed test videos. The ER-X is capable of 1gig in a single direction. I would look at the ER-4 for these speeds instead.
@@ToastyAnswers appreciate your reply helped me out alot i will check out that other video as well
@@ToastyAnswers one last question. So if one was to go with a regular consumer grade router what brand or brands are the best?
@@DexsoCurry asus is by far the best consumer grade router in terms of performance. "The rog strix line"
When typing in
set system offload ipv4 forwarding enable
i get an error saying value validation failed.
Which model of Edgerouter do you have? The offload commands differ depending on the specific model of Edgerouter (some have a switch chip, and others do not).
Commands for ER-X, ER-10X, and similar devices (MediaTek-based)
set system offload hwnat enable
set system offload ipsec enable
Commands for ER-4, ER-Lite, and other similar devices (Cavium-based)
set system offload ipv4 forwarding enable
set system offload ipv4 vlan enable
set system offload ipv4 gre enable
set system offload ipsec enable
Hi, i have edgerouter x with firmware 2.09. I use wan 1 and wan 2. Wan 2 is starlink. Normal speed in wan 2 is 200mbit of download and 20 of upload. With my ubiquiti router the speed came limited to 60/70 mbit in download, why ?
I have enabled/disabled ipsec and hwnat but the problem is always the same.
Thanks a lot for the help.
Disable the QoS if its enabled.
Bro if you are here please help. If I have a large "latency unloaded" (50) during the day, and at night it is small "latency Unloaded" (23), with this switch the latency Unloaded will decrease or the switch only affects "download Active" and bufferfloat. The answer depends on whether I will buy a switch for fiber optic where there is a high latency or whether I will switch to twisted pair where there is a small latency and therefore buy a cheaper switch without optical fiber. ty very much bro u give me chance for good gaming
fq codel quantum 300?
Question: Is this router still relevant in 2022?
Whether it’s relevant or not, the x has a great price point of entry for the features it has. It’s not enterprise, but for a home user it’s not a bad piece of kit. I have one for a few years without any issues and it does what I need. If I ever needed improved features, I would consider something else, and I would imagine a lot of other people are in the same boat as me.
Yes
ER4 is great for home users. I've used two for two+ years now, VRRP for VIP on two ISP connections. Works great for firewall rules for locking down VLANs, like security cams, or IOT devices. Two cost me less than $350 USD. The alternative is two pfSense boxes from Netgate... you're looking at much more money.
@@DarthBobo Ahhhh cool. I may just pull mine back out the box then lol.
I bought one 1 year ago for a 50/50 4g connection. The sqm qos is one of the main reasons for going with this model. Size (behind sofa in living room) and price was also a factor. I would still buy it today for the connection I'm using it with.
For a high speed fiber connection I would probably consider something else.