That blade is impressive! Especially how it went right through those nails with ease! I didn’t know about them but I will definitely be trying them out. Diablo makes great blades. Paired up with the M12 Fuel, great match! That oscillating tool is solid as well. That XC battery on there makes a nice handle. Well done! 👍🏻
This blade is what I needed 20 blades ago. Thanks for the review, keep up the awesome work you do for the viewers. It can save me alot of time and money to know these things,
Glad you got a chance to review them. I have used the nail embedded blades for a while now. The price scared me at first, but the life, quality of cut, and speed of the blades makes it worth it to me.
That's one of the very few times I've seen an oscillating tool blade cut through nails and do it multiple times. Some of the blades are finished if you hit a staple. Love all the teefes left. I will definitely be going to be stocking a few of these in my packouts
I just paused the video at three minutes and 31 seconds for just a quick mention on the curved edge blade. The reason why a curved edge blade is better than just a straight edged oscillating blade is, as the blade goes left and right (Oscillates)the center of the blade (curved edge) feathers in the location for a perfect cut rather than a straight edge blade where as it goes left and right the ends of the blade will occasionally hit & bounce off of the material which will in-turn leave you with unwanted chips and damage to the actual material and most likely you’re blade as well. Just figured I’d put that out there before I watched the end of the video to see if my knowledge of the curved edge was correct. As always thank you Vince and the crew for posting an amazing video. Big ups!!!!!!!!!!
Your an excitable professional to begin with ,that’s why I watch your channel . To finally have a multi tool blade that holds up to abuse deserves your type of presentation. 🎉🥳
Cool blades Made in Switzerland 🇨🇭 Hell yaaa !!! And as a remodeling contractor I will check out the star lock version for my Fein multi tools. Got to get some !!!!! Thanks Vince !!!!
What I use is there spaddle bits . Circular saw blades and from using the Suzanne dovetail saw I can now see that these oscillating blades are going to cut very fast and very true
Please show us the carbide multitool blade from Diablo. I had no idea they made any oscillating tool blades. I've been using the framing blades for 15 years though.
I just ruined a brand new fein blade just plunge cutting into a 2x4 of pt. I hit a hard spot in the grain and the heat mutated the leading edge of the blade from straight across into a curvy swervey line. Unbelievable. I think I paid $15+ for the thing and it didn't even make it through one cut. Glad to see you testing the Diablo blades. I'm switching over to them now!
i did not know about these surprisingly, and i will be picking up some of these for sure. almost all i use is Diablo Recip blades, Circular blades, and their spaddle bits. one of the best in the business as far as i’m concerned. Diablo and Lenox. i’ve put Diablo blades to the test and they get the job done and do it well every time for me. they also make some great SDS bits that i use too. i will give Lenox credit though, i use their stuff too. if i could never use Diablo again it would be strictly Lenox, no question. if i stop somewhere for blades and they don’t have Diablo i grab Lenox next without any hesitation. their blades have always treated me well.
Would also like to see the carbide option! I'm a flooring contractor, primarily on remodel side of things.... always burning up my OMT blades! Go thru several installing retrofit flush mount vents and outlets and cutting door jambs.
Idk how I'm only just now seeing this, but early on I was like "Oh, yeah, those are all I buy for mine...", lol. Ever since I saw my first VCG x Diablo video, it's been my #1 go-to accessory brand, hands-down. I don't wanna jinx them, but it seems like Bosch just can't seem to do anything below top-tier quality any more, and I'm more than happy about that. Oh, and I don't think I've ever said this, Vince, but THANK YOU for having introduced me to Bosch's Diablo line, cuz it's been a total game-changer.
I have a number of Diablo's oscillating tool blades, and they're geat. I never understood that "curved contact" edge though. But great blades, I have the starlock version for my Bosch and regular fit for mi Makita
I see your still wearing the Milwaukee gasketed safety glasses. Those really are comfortable glasses aren't they? I had to splurge a few months ago and get a pair. I love them.
I got 22 two packs of 6.5 circular saw blades for 1.16 per blade on HD clearance.... those are currently my favorite.... but I adore my Diablo blades .... by far better and longer lasting.
Awesome video. Used a brand new Milwaukee blade on my Dewalt multi tool today and it didn’t make it to see another day. Good thing the pack I got was on sale.
I have a Dewalt OMT and have been going through blades like crazy as a Restoration contractor. Does anyone know how long the blades actually last? I typically cut through wood paneling and drywall with my OMT. Thanks!
I've loved all of their bits& blades I've used. Thought about picking up the oscillating blades, but haven't needed the tool recently, so haven't picked those up.
I would love if you do to comparison between Diablo and Spyder. The nearest home Depot is 45 minutes away so it's not practical for me to go down there unless I buy a lot
I would like to see you test out the Diablo carbide toothed blades , maybe put them up against milwaukee or Bosch or imperial to see who makes the best blade
I saw someone else review them the other day and say them at my The Home Depot but it was like right at the end and they had a thing to separate them from the other brands which kinda hide them
Im curious to how well this set up would do with doing tight cutouts such as brands/logos in the side (flat part) of 1/8”-3/16” carbon steel sheet metal for truck bumpers, but id rather not spend the money to test it since I wouldn’t use it anywhere else other then in the welding shop if it didn’t work for that. Sometimes an angle grinder is too big, and a torch warps the sheet so I’m looking for something small and efficient, I suspect it should cut about like a reciprocating saw does on steel but I’m not sure. Thanks!
That blade is impressive! Especially how it went right through those nails with ease! I didn’t know about them but I will definitely be trying them out. Diablo makes great blades. Paired up with the M12 Fuel, great match! That oscillating tool is solid as well. That XC battery on there makes a nice handle. Well done! 👍🏻
This blade is what I needed 20 blades ago. Thanks for the review, keep up the awesome work you do for the viewers. It can save me alot of time and money to know these things,
Glad you got a chance to review them. I have used the nail embedded blades for a while now. The price scared me at first, but the life, quality of cut, and speed of the blades makes it worth it to me.
It's awesome for VCG tool expert Vince to be sending us updates of new products out there!
Diablo makes my favorite circular saw, miter saw, table Saw, recip, Jigsaw blades and there oscillating blades are very nice @vcgconstruction
Thanks for the heads up ! On account of you , I bought an M12 Fuel OMT ! Working good so far ! Diablo is a class act !
I appreciate the music edit over the tool noise, I hate having my finger on the volume all the time. Nice video!
That's one of the very few times I've seen an oscillating tool blade cut through nails and do it multiple times. Some of the blades are finished if you hit a staple. Love all the teefes left. I will definitely be going to be stocking a few of these in my packouts
I just paused the video at three minutes and 31 seconds for just a quick mention on the curved edge blade. The reason why a curved edge blade is better than just a straight edged oscillating blade is, as the blade goes left and right (Oscillates)the center of the blade (curved edge) feathers in the location for a perfect cut rather than a straight edge blade where as it goes left and right the ends of the blade will occasionally hit & bounce off of the material which will in-turn leave you with unwanted chips and damage to the actual material and most likely you’re blade as well. Just figured I’d put that out there before I watched the end of the video to see if my knowledge of the curved edge was correct. As always thank you Vince and the crew for posting an amazing video. Big ups!!!!!!!!!!
Rocket science!! 🤣🤣🤣
Wow, fantastic! Loving the slow motion, too!
I got one of the paddle bits today to drill dog holes in a bench unbelievable performance. Huge time saver
Love those blades and makes the difference in getting the job done , thank you Vince VCG.
42 tooth Diablo. PERFECT finish
Congrats on 350,000 subscribers
Thanks Charlie
@@VCGConstruction keep up the good work vince
I love the way Vince presents and educates while presenting on the channel, i just wish i can work side by side with you someday when i get to Philly
That's right! A person shouldn't be spending money on a quality oscillating tool without syncing it to an awesome blade.
Your an excitable professional to begin with ,that’s why I watch your channel . To finally have a multi tool blade that holds up to abuse deserves your type of presentation. 🎉🥳
Yes I definitely will be trying this out thanks
They do make the best tool accessories
Last month I found them at home depot and did not hesitate to buy them. They have worked out great and definitely recommend.
Good video Vin. Thanks.
I’m a “remodeler” and I will admit that Diablo is the ONLY blade I use. The carbide oscillating blade is my particular favorite.
Nice work pointing out that it has a small curve looks like a great blade for plunge cutting @vcgconstruction
Going to have to get these blades for the remodel I’m doing. The way they cut through the nails like they weren’t there was amazing
Hey VCG. I did not know about these blades but will absolutely be checking them out. Thanks for the info. GREAT STUFF!!!
Yeah got my hands on them recently and used them on a remodeling job they are awesome so far
Cool blades
Made in Switzerland 🇨🇭 Hell yaaa !!! And as a remodeling contractor I will check out the star lock version for my Fein multi tools. Got to get some !!!!! Thanks Vince !!!!
What I use is there spaddle bits . Circular saw blades and from using the Suzanne dovetail saw I can now see that these oscillating blades are going to cut very fast and very true
Please show us the carbide multitool blade from Diablo. I had no idea they made any oscillating tool blades. I've been using the framing blades for 15 years though.
Definitely going to check them out. Been a Diablo user for 10+ years, consistently, as a DYI'er.
VCG, Definitely need that carbide blade review. Hook us up
Can’t complain about them. That’s a great quality in a tool
Get the carbide blade, see how they compare to DeWalt, milwaukee
Was about to say the same thing
Lol dewalt doesnt compare to hercules. Tti doesnt make a good blade either. Fein and freud all day baby
Oops well imperial isnt bad pricey like the fein and freud.
Drywall screw test between the three, at one point or another you always seem to hit one
Great idea!
Diablo metal cutting wheel...circular saw....is awesome.
I just ruined a brand new fein blade just plunge cutting into a 2x4 of pt. I hit a hard spot in the grain and the heat mutated the leading edge of the blade from straight across into a curvy swervey line. Unbelievable. I think I paid $15+ for the thing and it didn't even make it through one cut. Glad to see you testing the Diablo blades. I'm switching over to them now!
Yeah that's a great blade. Definitely gonna have to invest in some. Great video brother!
i did not know about these surprisingly, and i will be picking up some of these for sure. almost all i use is Diablo Recip blades, Circular blades, and their spaddle bits. one of the best in the business as far as i’m concerned. Diablo and Lenox. i’ve put Diablo blades to the test and they get the job done and do it well every time for me. they also make some great SDS bits that i use too. i will give Lenox credit though, i use their stuff too. if i could never use Diablo again it would be strictly Lenox, no question. if i stop somewhere for blades and they don’t have Diablo i grab Lenox next without any hesitation. their blades have always treated me well.
Yeah Vince I got a Diablo blade for my circular saw and it cut faster in hardwood then my old blade in softwood
Would also like to see the carbide option! I'm a flooring contractor, primarily on remodel side of things.... always burning up my OMT blades! Go thru several installing retrofit flush mount vents and outlets and cutting door jambs.
Great news, great product from a great company.
Yeah we been using the Diablo multi tool blades for about a month now got em at Home Depot in central Arkansas very good blades for sure
the whoosh sound effect every time it zooms in is killing me
Very impressed with how cut through the nails. Looks alot better then my dewalt blades cut
Idk how I'm only just now seeing this, but early on I was like "Oh, yeah, those are all I buy for mine...", lol. Ever since I saw my first VCG x Diablo video, it's been my #1 go-to accessory brand, hands-down. I don't wanna jinx them, but it seems like Bosch just can't seem to do anything below top-tier quality any more, and I'm more than happy about that. Oh, and I don't think I've ever said this, Vince, but THANK YOU for having introduced me to Bosch's Diablo line, cuz it's been a total game-changer.
Thanks for the great tip on the blade. I know want to buy for replacement.
Great video.
"If you like having all your teethessis intact, smash that like" 🤣😂 busted out laughing
Can't wait to try these! Thanks for another stellar demo and recommendation!!
I do a lot of plunge cuts for cut out for fans on computer desk I build I may have to try them out
This is perfect. I was just thinking yesterday "I need new blades, I wonder if diablo makes any"
I will definitely be looking for those.
A wonderful oscillating blade works hand-in-glove with the power tool, cutting easily through wood!
I like Freud blades in the circular saw and miter saw, I’m also a big fan of Starrett blades in the recip saw
Used one of their metal cutting blades a month or so ago. It lost a bunch of teeth and never made it through. The wood blade is a beast though.
Wow impressive you could see in slow motion that you did not slow down even more when hitting the nails very nice now how much
I have a number of Diablo's oscillating tool blades, and they're geat. I never understood that "curved contact" edge though. But great blades, I have the starlock version for my Bosch and regular fit for mi Makita
Have you guys seen these in the Depot yet? Mine just started carrying the Milwaukee blades which are my go to currently
I see your still wearing the Milwaukee gasketed safety glasses. Those really are comfortable glasses aren't they? I had to splurge a few months ago and get a pair. I love them.
I got 22 two packs of 6.5 circular saw blades for 1.16 per blade on HD clearance.... those are currently my favorite.... but I adore my Diablo blades .... by far better and longer lasting.
Avant cheapos
Nice thanks for sharing!
They have been out for a while now, I bought some a few months back and they work real good .
@VCG Construction when will we see the ryobi hp 1/2” impact wrench? Looks like a beast @ 600 ft-lbs
Awesome video. Used a brand new Milwaukee blade on my Dewalt multi tool today and it didn’t make it to see another day. Good thing the pack I got was on sale.
Would lIke to see the carbide blades performance
They make quick connect holesaws and they are by far the best hole saws I've used.
Definitely got to see the carbide tooth blade, the bi-metal was very impressive, all of my blades are either milwaukee or diablo.
Everything I have for my power tools are Diablo💯 just got a router and now getting bits from Freud/diablo
I have diablo blades awesome. Never leave home with out them.
I do like all my teffisis intact so here’s my like. Lmao
Never used it but Imperial Blades makes a killer drywall oscillating blade
So glad diablo made blades for oscillating tools. The regular blades just dont last very long.
Hey you have a Spyderco PM2 Tanto! Nice!
What’s the best blades for old plaster walls? Recently destroyed some bi-metal blades cutting out outlets.
Looks like the paint and measurements came off I will defenitly be grabbing some @Vcgconstruction
Diablo ROCKS!!!!!!!!!!!!!!!
I have a Dewalt OMT and have been going through blades like crazy as a Restoration contractor. Does anyone know how long the blades actually last? I typically cut through wood paneling and drywall with my OMT. Thanks!
Use Diablo blades in my Makita circ saws and recip saws, will have to look for these in the StarLock config for my Fein oscillating tool.
Yo, Vince! Nice pinky extension while cutting to shred guitar!
I've loved all of their bits& blades I've used.
Thought about picking up the oscillating blades, but haven't needed the tool recently, so haven't picked those up.
I just bought one of these the other day.
Diablo is amazing.
Diablo is top for most of its tools
I would love if you do to comparison between Diablo and Spyder. The nearest home Depot is 45 minutes away so it's not practical for me to go down there unless I buy a lot
Amazing demonstration and nope never heard of them and have been snowed in for 2 days heading to Home Depot tomorrow
wow im gonna have to get a couple of these blades
Love there blades
Vince, you figured it out...it's slightly curved which keeps the blade from "walking" when trying to plunge.
Hey, I know they are pretty new, but they are very pricey. Any chance of "requesting" a price break?
I’ve had nothing but great success with Diablo I will continue to use it don’t see any reason to change
When I used this blade on my Dewalt Atomic, it just cuts like a hot knife through butter.
Are there any blades that will survive cutting through screws? Are know they are harden steel.
I would like to see you test out the Diablo carbide toothed blades , maybe put them up against milwaukee or Bosch or imperial to see who makes the best blade
Diablo makes great blades, but I'm also a big fan of the Spyder blades
I saw someone else review them the other day and say them at my The Home Depot but it was like right at the end and they had a thing to separate them from the other brands which kinda hide them
Yea there sawzall blades are strait nasty,-carbide tipped that is. 💥👊
Have to get one
you should make a video on the Sharp Pog by Rack a teirs. it attaches to a chucked drill and sharpens worn out multi tool blades.
It can sharpen a wood cutting blade?
@@seasgarage yep sure can
Looking at possibly getting a multi tool, found a good price on the new makita. Diablo… still a favorite I’m assuming?
I did not know. I am buying one right now.
Im curious to how well this set up would do with doing tight cutouts such as brands/logos in the side (flat part) of 1/8”-3/16” carbon steel sheet metal for truck bumpers, but id rather not spend the money to test it since I wouldn’t use it anywhere else other then in the welding shop if it didn’t work for that. Sometimes an angle grinder is too big, and a torch warps the sheet so I’m looking for something small and efficient, I suspect it should cut about like a reciprocating saw does on steel but I’m not sure. Thanks!
do these blades cut thru harder woods like oak, cherry or mahogany ? 🤔