You can start timing either if you know about how long it takes you to put it on. The timing is from completely applied to one eye but if it takes a minute to apply the second eye and a minute to remove the second eye you can start timing from first eye - I hope that makes sense.
Great question! You need to wait at least two weeks so you dont over process. If you want to add more curl, you can use a smaller rod and "bump" the base in two weeks, For less curl use a larger rod and "reperm" but only 3 minutes~
Thanks Kelsey! Will have an updated video shortly with our new lift! its a 5-8minute instead of 12-15 and avail on www.lashx.pro I hope to have this video up in the next couple of weeks!
I was always taught to not get lashes wet after lash lift but when doing a lift and a tint how do I remove the tint without using water? Can I use water? Or will just the nourishing oil be fine?
Thank u for the great tips 💗 I clicked on the links provided but didn't see the kit you used with individual small containment. Do you know if it was discontinued? Is there another similar kit u can recommend?
Hi we have since updated our video (link in description) and made our own kit that it healthier for the hair! You can find it on www.LAshX.pro under lash lift kit
Hi Karla - you can put glue on clean silicone pads before the service. Once doing the service if you need to add adhesive they touches client at all you can use disposable micro swabs or lip brushes( don’t double dip). Or i sometimes have one glue per client if they are regulars and do more than one lift service. Xx
Hello! I have a question about the nourishing oil.. Is it okay to use a castor or coconut oil substitute? I have looked online and it says the applying oiles can straighten the lashes back out . So I am curious to know the difference between nourishing oil and your typical castor/coconut oil...
The nourishing gel is a specific formula for the lift. It will not straighten the lashes and contains keratin to help lash health. I wouldn’t try to make my own.
No you need to use the nourishing oils specifically because it’s formulated to rebalance the hair PH. It’s a chemical process so you need to follow exactly. Other oils are too heavy and will weigh down lashes too. You will notice this oil is very light weight
Reflectocil says to use water to remove the tint after you've applied it. And some say oil wil remove the tint. But you've had no trouble with only removing with dry Qtips? I've never used tint in between the lift because I didn't want to use water
great video! thank you. I've just taken the Yumi lash course, and for step one, we need to apply heat to the lashes while it is being activated. We were taught to boil water and dip some cotton round in the water, let cool slightly and apply. But I am looking for a better method for applying the heat. I cant seem to find one online. Any ideas?
Interesting, one our team members here did the Yumi training as well. I dont use heat for any of my lifting methods. I actually just made my own product...video coming in a few weeks but you can check it out on www.lashx.pro!
Hi Jordan, In some cases we need to do lifts in order to apply lash extensions! That being said, you cannot apply the extensions for 24hours after treatment because you want to wash the oil off. Also be cautious not to over curl or application of extensions will be more challenging. You can see an update of this video here: th-cam.com/video/e7qz4WhQoDk/w-d-xo.html We also offer online certifications if you are interested. they come with the product: lashacademy.teachable.com/
make sure you cleanse with the right cleanser to remove any natural oils on hair or skin. Let the glue get tacky before applying and then it will grab quick. If you apply too soon before it gets tacky it won’t hold yet
Rosy Red usually the longer the lashes the larger the rod. Smaller rods will provide more lift! We also offer an online certification course for a more in depth explication along with a lot more education on the service. You may find it here: lashacademy.teachable.com
Hi Lisa, Yes, I usually use both sides of the qtips. haha when filming and trying to think of what to do, and say and make sure the service is great I sometimes just try and make things simple! xx thanks for watching
I have only one problem with this video. Why didn't you zoom in? Everything is so far. How are we supposed to see the whole process and the difference between the before and after pics?
Sorry it is hard to see! Watch our newest version! th-cam.com/video/e7qz4WhQoDk/w-d-xo.html and for a full course that has close ups we have a lash academy lashacademy.teachable.com
i could tell she has gentle hands towards the client. like how she asked and communicate with the client. beautiful result.
Thank you! :)
This video really helped me! Thank you!
I'm so glad!
Yay!!
do you start counting the minutes right when you apply the steps or when you´re done putting them on?
As soon as I finish the first brow or lash!
You can start timing either if you know about how long it takes you to put it on. The timing is from completely applied to one eye but if it takes a minute to apply the second eye and a minute to remove the second eye you can start timing from first eye - I hope that makes sense.
You can start timing as soon as you are done applying.
If the lashes don't turn out as expected, how soon can you use the kit again to try and correct them?
Great question! You need to wait at least two weeks so you dont over process. If you want to add more curl, you can use a smaller rod and "bump" the base in two weeks, For less curl use a larger rod and "reperm" but only 3 minutes~
Best to wait 2 weeks before reprocessing. I’m some cases you can do a small
Short bump. Call me :)
Awesome video very helpful, thank you
Thanks Kelsey! Will have an updated video shortly with our new lift! its a 5-8minute instead of 12-15 and avail on www.lashx.pro I hope to have this video up in the next couple of weeks!
I was always taught to not get lashes wet after lash lift but when doing a lift and a tint how do I remove the tint without using water? Can I use water? Or will just the nourishing oil be fine?
Remove dry and then with nourishing oil! ;)
Thank u for the great tips 💗 I clicked on the links provided but didn't see the kit you used with individual small containment. Do you know if it was discontinued? Is there another similar kit u can recommend?
Hi we have since updated our video (link in description) and made our own kit that it healthier for the hair! You can find it on www.LAshX.pro under lash lift kit
Yes we replaced it with a faster lift kit called LAshX lift kit! Check our channel for the newest videos
Getting this done tomorrow. Fingers crossed it turns out this nice :)
Post your results!
How does it look?
Hi great video! Btw what kind of under eye gel patch do you use? Where can I buy them and what is called, thank you!
Hi thanks for watching we distribute these gel pads they are the best I have found and you can get them at www.lashx.pro
www.LAshX.pro
I have found this video very helpful but Is it sanitary to use the same glue brush on multiple people?
Hi Karla - you can put glue on clean silicone pads before the service. Once doing the service if you need to add adhesive they touches client at all you can use disposable micro swabs or lip brushes( don’t double dip). Or i sometimes have one glue per client if they are regulars and do more than one lift service. Xx
Also we have a newer updated video in the show notes
No I use disposable when not filming or some clients have their own bottle each. They are pretty cheap
Hello! I have a question about the nourishing oil.. Is it okay to use a castor or coconut oil substitute? I have looked online and it says the applying oiles can straighten the lashes back out . So I am curious to know the difference between nourishing oil and your typical castor/coconut oil...
The nourishing gel is a specific formula for the lift. It will not straighten the lashes and contains keratin to help lash health. I wouldn’t try to make my own.
No you need to use the nourishing oils specifically because it’s formulated to rebalance the hair PH. It’s a chemical process so you need to follow exactly. Other oils are too heavy and will weigh down lashes too. You will notice this oil is very light weight
Can you tag/list all the products that are used for this procedure?
Hi Jordan! Of course I used the LAshX Pro Lift Kit and Reflectocils tint. Both are available at www.lashx.pro
Reflectocil says to use water to remove the tint after you've applied it. And some say oil wil remove the tint. But you've had no trouble with only removing with dry Qtips? I've never used tint in between the lift because I didn't want to use water
I remove the product dry then use the special nourishing oil. Never any issues! I use reflectocils brand
@@LAshXLA thank you for answering 😊
Remove dry and then with nourishing oil! You will be golden
Great video wish the camera was a little bit closer
That’s our old video. Newer version here th-cam.com/video/e7qz4WhQoDk/w-d-xo.html
Where did you get this kit?
The kit can be found www.lashx.pro under lash lift kits
Does the oil take away front the tint because if had that issue with other kits completely disregards my tint treating
Katlin Crocker hi no you would tint and then use the special oil. It’s a special nourishing treatment made to go after tints and lifts.
This oil works
Great with reflectocils or intensives. Make sure to only leave tint 3 minutes when doing with lift or lam!
Nope!
I've had experience with the tint burning the eyes while being removed. What is the fix for this?
Being really careful with removal. If they do sting flush with saline drops or water.
We will be coming out with an online training shortly
Our tint certification launches on Monday!! You can get on the list by texting 1310-855-3305 or calling!
Does is matter which activator you use? The liquid or cream?
I like cream because it’s less likely to drip in eye. Here is the full tint video th-cam.com/video/5LIapkiZTQY/w-d-xo.html
Great video thank you!
What product did u use for tinting?
Thanks for watching I usually use Reflectocil or Intensive
We use reflectocils and you can find it here www.LAshX.pro under tint kits
great video! thank you. I've just taken the Yumi lash course, and for step one, we need to apply heat to the lashes while it is being activated. We were taught to boil water and dip some cotton round in the water, let cool slightly and apply. But I am looking for a better method for applying the heat. I cant seem to find one online. Any ideas?
Interesting, one our team members here did the Yumi training as well. I dont use heat for any of my lifting methods. I actually just made my own product...video coming in a few weeks but you can check it out on www.lashx.pro!
@kellinahorgan here is the updated video th-cam.com/video/e7qz4WhQoDk/w-d-xo.html
Can you please tell me how to clean the shield from the lash tint? Mine gets slightly tinted every time I do it!
I throw mine out! I don’t think there is a great way to clean and sterilize then
@@LAshXLA sorry I meant the rod 😂
Rachele Mellai I understood! Yes I toss em!
I Toss em!
I was taught that you can’t apply eyelash extensions atop of a lash lift? And also, how much time do you leave the products on the lashes?
Hi Jordan, In some cases we need to do lifts in order to apply lash extensions! That being said, you cannot apply the extensions for 24hours after treatment because you want to wash the oil off. Also be cautious not to over curl or application of extensions will be more challenging. You can see an update of this video here: th-cam.com/video/e7qz4WhQoDk/w-d-xo.html
We also offer online certifications if you are interested. they come with the product: lashacademy.teachable.com/
You need to wait 25 hours. Be careful not to make them too curly ! Sometimes you need to lift to make lashes behave so you can extend!
For some reason I’m having trouble keeping the lashes on the shield any tips
make sure you cleanse with the right cleanser to remove any natural oils on hair or skin. Let the glue get tacky before applying and then it will grab quick. If you apply too soon before it gets tacky it won’t hold yet
LAshX LA thank you so much 😊 I appreciate your help
of course!
How to select the rod i hv thick long lashes
Rosy Red usually the longer the lashes the larger the rod. Smaller rods will provide more lift! We also offer an online certification course for a more in depth explication along with a lot more education on the service. You may find it here: lashacademy.teachable.com
um btw the q tips are double sided which allows you to use it twice rather than once which is less efficient
Hi Lisa, Yes, I usually use both sides of the qtips. haha when filming and trying to think of what to do, and say and make sure the service is great I sometimes just try and make things simple! xx thanks for watching
How long it work this product after applying?
zed ream you leave each step 3-8 minutes. Results lasts up to 3 months
How to buy this product? I want to try this product because my previous use is almost weeks and they back to normal, thank you
zed ream are you a pro? We sell professional products here www.lashx.pro and also offer courses if you need to get trained. Lashacademy.teachable.com
Could you please let me know what kind of lash tint did you used?
I usually use Reflectocil and or Intensive
I have only one problem with this video. Why didn't you zoom in? Everything is so far. How are we supposed to see the whole process and the difference between the before and after pics?
Sorry it is hard to see! Watch our newest version! th-cam.com/video/e7qz4WhQoDk/w-d-xo.html and for a full course that has close ups we have a lash academy lashacademy.teachable.com
Hello friend together we are strong
YES! xx
Or what is its name
The kit is called Dolly Lash and it’s from www.lashx.pro our new kit is called the Lashx Pro lift kit and it’s just faster!