Sick of these Temp changes.

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ต.ค. 2024

ความคิดเห็น • 45

  • @KoiEvents
    @KoiEvents 5 หลายเดือนก่อน +1

    Good job scrap, fyi if memory serves there is 4 holes underneath for 4 pipes! Mine come with the pipes in the box

    • @scrag68
      @scrag68  5 หลายเดือนก่อน +1

      Thanks I got mine used and didn't come with any 👍

  • @koicentralofficial
    @koicentralofficial 5 หลายเดือนก่อน +1

    Fair play Craig, considering getting one myself. These temperature swings are really p***ing the koi off.

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Nightmare Matt temps a up and down like a brasses draws. Hopefully this will cut some of the stress out. 👍🙏

  • @andrewjones7670
    @andrewjones7670 5 หลายเดือนก่อน +1

    Looking great 👌

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks 🙏

  • @Sharpeyskoi
    @Sharpeyskoi 4 หลายเดือนก่อน +1

    fish looking good mate

  • @TelfordKoiPond
    @TelfordKoiPond 5 หลายเดือนก่อน +2

    Super job Craig, whole setup is outstanding 👏😊👍

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks Phil 🙏

  • @westbromkoi
    @westbromkoi 5 หลายเดือนก่อน +1

    Just the job that is scrag, top job on the pipework too 👌🏼👍🏼. I've turned off my inline heater now and the temp swings are insane

    • @scrag68
      @scrag68  5 หลายเดือนก่อน +1

      Thanks Shag hope your OK mate 👍 🙏

    • @westbromkoi
      @westbromkoi 5 หลายเดือนก่อน

      All good shag 👍🏼👌🏼

  • @matproud44
    @matproud44 5 หลายเดือนก่อน +2

    I can honestly say ive never seen anything like you set up outside of a commercial operation! I lot of time love effort and money gone in there pal , you must be very proud it is amazing

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thank you always a boost when you get nice comments of appreciation 🙏

  • @adethekoikeeper6505
    @adethekoikeeper6505 5 หลายเดือนก่อน +1

    Looking good and that

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Banging AND THAT

  • @edenkoipond
    @edenkoipond 5 หลายเดือนก่อน +1

    Nice install scrag! Nice and tidy. Like you say, bit of a bum twitcher (mines wonky 😂) An investment you won’t regret 👍🏼

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thank You Shag 🙏

  • @CBersPond
    @CBersPond 5 หลายเดือนก่อน +1

    Great video Craig 👍
    Welcome to the world of Thermotec ASHP ownership 👍
    Shout if you need anything and Phil's not around.
    Dave, Si and I all have them.
    Hope you're well.

    • @scrag68
      @scrag68  5 หลายเดือนก่อน +1

      Thanks Mate I've reached out to Si and Phil good to have others that can help thank you 🙏

  • @atsuminaoki9910
    @atsuminaoki9910 5 หลายเดือนก่อน +2

    7:25 KOI swimming and behaviour seems to be improving! I'm all for the idea of keeping the UK's water temperature, which is unstable at this time of year, as constant as in Japan.

    • @scrag68
      @scrag68  5 หลายเดือนก่อน +1

      Thank you

  • @JamesTHEKOIwhisperer123
    @JamesTHEKOIwhisperer123 5 หลายเดือนก่อน +1

    Looking good mate now that’s the hammer 🔨 koi will definitely like the stable heat temps now and pipe work looks great mate

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      NOW THEN BOI, Thanks 🔨🐇🐰🐇

  • @marekskoipond9083
    @marekskoipond9083 5 หลายเดือนก่อน

    Good choice on the thermotec, great bit if kit, crack open the bypass to get 2deg difference between inlet and outlet pipes 👍

  • @CescaTheDarkHorse
    @CescaTheDarkHorse 5 หลายเดือนก่อน +1

    Nice one Scrag 👍 good choice of Air Source Heat Pump 🔥
    ⛩🐟⛩

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thank you 🙏

  • @BlackCountryKoi
    @BlackCountryKoi 5 หลายเดือนก่อน +1

    Nothing wrong with that pipe work ar kid , Phil will be proud . Whats the Kw on the air source mate ? Looks the biz 👌🏻👍🏻👍🏻👍🏻👍🏻

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Ar Bin Ya Me Mon, it's the 9kw shag. Thanks 🙏

  • @HumberKoi
    @HumberKoi 5 หลายเดือนก่อน +1

    Great update mate my pond is swing temps are doing my head in to great to see you putting content out mate, and your pond looks well all the best matey

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks Matey

  • @mark5tytshort770
    @mark5tytshort770 5 หลายเดือนก่อน +1

    Well done, best thing I did ,I heat 13 degrees winter and 18 degrees summer, fish been no problem, good luck 👍

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks mate good to see what others are running 🙏

    • @mark5tytshort770
      @mark5tytshort770 5 หลายเดือนก่อน +1

      @scrag68 I bought mine for stability not hi temperature my fish I feed my fish till end of January then feed 2 to 3 weeks pearl barley manuka honey and garlic powder ,then stop feeding for 6 weeks then start feed slowly and lift temperature slowly.

  • @jiffsterkoi
    @jiffsterkoi 5 หลายเดือนก่อน +1

    Good job done mate nothing wrong with your pipe work you learnt from the master 😆
    Your fish are looking good especially the shiros 👍🏼👍🏼

    • @scrag68
      @scrag68  5 หลายเดือนก่อน +1

      Thanks Koi Mate he will always be the master I'm learning from the best @@telfordkoipond #mrpipe

  • @keepingitkoi
    @keepingitkoi 5 หลายเดือนก่อน +1

    That will do the job nicely mate 😊👍

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks mate

  • @JohnBryan-yd8br
    @JohnBryan-yd8br 5 หลายเดือนก่อน +1

    Hi there, what is the plant growing out of the shower ?

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      It's call Baby Tears or Mide Your Own Business 👍

  • @tonybarker428
    @tonybarker428 5 หลายเดือนก่อน

    Nice job there👍but the big question is…..what’s the Draco for???

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks Tony means a lot from a seasoned pro thanks. Nowt wrong with your eyesite 🤔🤣

  • @matproud44
    @matproud44 5 หลายเดือนก่อน +1

    That a little roach in the grow pond? Lol

  • @markscountrykoi
    @markscountrykoi 5 หลายเดือนก่อน +1

    Fish are looking great scrag can’t go wrong with a heat source but don’t class the heat source pump cause it will district itcs working scrag

    • @scrag68
      @scrag68  5 หลายเดือนก่อน

      Thanks Mark 🙏