Reliable ignition switch kit

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ธ.ค. 2024

ความคิดเห็น • 43

  • @lyndonbell5147
    @lyndonbell5147 9 หลายเดือนก่อน +3

    That is an excellent instruction video as well as visuals of the procedure. We were successful due to this video

    • @bigfella6629
      @bigfella6629 23 วันที่ผ่านมา

      How did you remove that cup that's pressed in?

    • @F.K_DA_NWO
      @F.K_DA_NWO 4 วันที่ผ่านมา

      ​@bigfella6629 you gotta use the special tool in the video

  • @garthnewman5859
    @garthnewman5859 4 ปีที่แล้ว +7

    Done it! Took just over an hour. Quite a fiddly job. So glad it's done.

  • @johnmalcolm9980
    @johnmalcolm9980 ปีที่แล้ว +7

    True to my usual form, a simple repair became a hassle when I lost one of the ball bearings.

    • @ripin4x481
      @ripin4x481 7 หลายเดือนก่อน

      Half way through the process of putting mine back together, big spring is no where to be found and missing 1 bullbearing, have taken out the ignition barrel and now it won’t go back in but it’s all ready to go 🙈

  • @charlieeden863
    @charlieeden863 ปีที่แล้ว +9

    Where do we get the ignition switch removal tool from?

  • @wallyclapa6739
    @wallyclapa6739 2 ปีที่แล้ว +2

    Really good video,no bs to sit through

  • @ShannonHartnett-117
    @ShannonHartnett-117 2 ปีที่แล้ว +5

    Exceptional vid mate kept simple and clean very professional thank you for sharing this knowledge

    • @johnmalcolm9980
      @johnmalcolm9980 ปีที่แล้ว

      True to my usual form, a simple repair became a hassle when I lost one of the ball bearings.

  • @bartnettle
    @bartnettle ปีที่แล้ว +1

    Excellent Instruction!

  • @benkaramaene3276
    @benkaramaene3276 4 ปีที่แล้ว +5

    Man...how hard is it to remove push those hoising pins out and then get them back in again. If i had've known this first i wouldnt have attempted it lol

  • @philsharp6120
    @philsharp6120 10 หลายเดือนก่อน

    My 07 terri sy wouldnt crank when in town (ing lights on) Swapped fuses relays and found bridging start relay would crank and run. Drove home and found wiggling key in start would start it, but then key lost detents an a ball bearing fell on my foot.... looks like will have to rebuild as per this video.
    One other fault before total fail was fan aircon stopped working and radio turned off but I could turn on.
    Thanks for this video, quicker than opening workshop manual.

  • @Haydntickford
    @Haydntickford 5 หลายเดือนก่อน

    Very helpful and professional video! Not sure about the Collingwood hat though 😆

  • @markbehr88
    @markbehr88 3 ปีที่แล้ว +2

    Excellent video. Thanks!

  • @deveous_dave
    @deveous_dave ปีที่แล้ว +2

    Just finished doing my SY territory ignition. A little fiddly but quite easy.

    • @bigfella6629
      @bigfella6629 23 วันที่ผ่านมา +1

      How did you remove that cup that's pressed in?

    • @deveous_dave
      @deveous_dave 22 วันที่ผ่านมา

      @bigfella6629 ummm it was a while ago. From memory there was a rolled press pin (or 2?) that need to be punched out.

  • @ChrisSofos
    @ChrisSofos ปีที่แล้ว

    Great video! Thanks for sharing! Any links where to find the switch extractor and the new switch parts? Thank you!!!

  • @peterbaker380
    @peterbaker380 2 ปีที่แล้ว +2

    Just wondering where you can get the new housing from. I'm in nsw, thanks

    • @bigfella6629
      @bigfella6629 23 วันที่ผ่านมา

      Ebay has them for around $35.

  • @darryllspalding5211
    @darryllspalding5211 2 ปีที่แล้ว +3

    Great video young fella! Could you recomend anyone in Darwin to do this job for me? The copper plate and stuff just fell on the floor of my ute. Cheers

    • @jettmtb3379
      @jettmtb3379 2 ปีที่แล้ว +1

      Same

    • @johnmalcolm9980
      @johnmalcolm9980 ปีที่แล้ว +1

      same, nothing broken, just fell apart. Lost a ball bearing somewhere. Small thing, major hassle. Keep a magnet handy.

  • @TheBohoushek80
    @TheBohoushek80 11 หลายเดือนก่อน +1

    Anny help where can i find buy the removal tool?

    • @billyhutchison8737
      @billyhutchison8737 11 หลายเดือนก่อน +2

      When you find out let me know please lol

  • @eyespy1415
    @eyespy1415 2 ปีที่แล้ว +2

    Oh for the want of two allen screws instead of the pins...

  • @johnmitchelltaus
    @johnmitchelltaus 2 ปีที่แล้ว +1

    Where can you buy the kit from and what is it called?

  • @mrcarexpert20
    @mrcarexpert20 หลายเดือนก่อน

    Anyone know where to buy the tools ?

  • @henryhiggins2021
    @henryhiggins2021 3 ปีที่แล้ว +1

    I found the ignition didn't click into on and acc like the original. key now feels like turning porridge . very expensive for what you get

    • @larzblast
      @larzblast 3 ปีที่แล้ว +1

      Then you did something wrong. I just did mine today and it feels solid.

  • @jedw7499
    @jedw7499 2 ปีที่แล้ว

    I've tried to call to purchase phone is never answered are you guys still in business?

    • @wc142
      @wc142 2 ปีที่แล้ว

      I'm not getting any response from Kev either, have they gone out of business

    • @jedw7499
      @jedw7499 2 ปีที่แล้ว

      @@wc142 must of which is unfortunate can't find anymore DIY places to sell them

    • @jedw7499
      @jedw7499 2 ปีที่แล้ว

      @@wc142 must of which is unfortunate can't find anymore DIY places to sell them

  • @simonmoriarty9987
    @simonmoriarty9987 ปีที่แล้ว

    Thx. Very good

  • @larzblast
    @larzblast 3 ปีที่แล้ว +6

    Just did mine, in all of about 30 minutes. The removal tool is an engineering masterpiece, unlike Ford and Bosch's disgusting engineering of this switch.
    Definitely be sure to have nice long pin punches on hand, otherwise it will be a painful task. The rest is easy if you follow the instructions closely and take your time with it.
    Screw Ford for poor quality components. Makes me glad they shut down the Adelaide factory.

    • @octo689
      @octo689 3 หลายเดือนก่อน

      Where did you get the removal tool. I cant find it

  • @romemancer7905
    @romemancer7905 ปีที่แล้ว +1

    What a stuff up Ford made to make what should be a simple job hard for the home mrchanic...give me an old falcon any day...taking out the barrel from the dash is a 5 minute job..BA and BF Falcons are such shitboxes ill never buy another one !!!

  • @markcrow9202
    @markcrow9202 9 หลายเดือนก่อน

    If it was designed properly from in the first place wouldn’t have to do this shit

  • @waygu66
    @waygu66 ปีที่แล้ว

    This is not the same tool i recieved nor did the insttuctions match the tool i recieved & as theres not a sufficent flat spot on the coated alloy housing whos the genius that forgot this shit slides every fkn where

  • @josephmohi31
    @josephmohi31 ปีที่แล้ว

    I just buy a spare whole wheel assembly with keys put in get coded $50