Sahil. I just found this video today. Subscribed. Will go thru all the videos. But currently we have simple mobile app controlled lights. Why do we need dali in today's advanced situation
Tks so much :) I no understand different between Basic System : 1. Motion Sensor + DALI Luminaires 2. DALI Motion Sensor + DALI Luminaires? Motion Sensor + DALI Luminaires need DALI Control then DALI Motion Sensor + DALI Luminaires NO need DALI Control?
how common/quickly is this method making its way into construction? on my first job using this system. seems vastly over complicated with little benefits. typically we use BAC connected controllers that handle local areas and then send status of switch legs to the central hub to monitor the facilities. this method, as i understand, sends conditions and manual override to the central hub to then cut/connect the raw electoral power to switch legs. i suppose the (relative) benefit.... in the past the individual components (switch/sensors) had built in IDs so that the installer needed the bar code for each piece to settle the network. DIAC allows to change their ID..... still cumbersome
Hi Sahil, good video. So the power from the distribution board only goes to the dali control unit ? And can we have two lets say 3 gang switches to switch on and off the lights from different areas in the room, for example if the doors into the room were in opposites sides?
Dear sir I have 1 request I want know related for motion sensor control panel Wiring form control panel DB to motion sensor and light. should be have in side DB relay fuse contector auto hand mode option plzz make one drawing hope you understand 🙏🙏🙏
Sahil. I just found this video today. Subscribed. Will go thru all the videos. But currently we have simple mobile app controlled lights. Why do we need dali in today's advanced situation
Valuable information thanks
Thanks sohil , from Saudi Arabia 🌹you make this lesson easier
It's my pleasure
The guys with this accent are constantly smart))
Please share one with emergency Lights
Somewhere in this video I mistakenly pronounced lightning which is lighting.
☹️🙏
Tks so much :)
I no understand different between Basic System :
1. Motion Sensor + DALI Luminaires
2. DALI Motion Sensor + DALI Luminaires?
Motion Sensor + DALI Luminaires need DALI Control then DALI Motion Sensor + DALI Luminaires NO need DALI Control?
how common/quickly is this method making its way into construction?
on my first job using this system. seems vastly over complicated with little benefits. typically we use BAC connected controllers that handle local areas and then send status of switch legs to the central hub to monitor the facilities.
this method, as i understand, sends conditions and manual override to the central hub to then cut/connect the raw electoral power to switch legs.
i suppose the (relative) benefit....
in the past the individual components (switch/sensors) had built in IDs so that the installer needed the bar code for each piece to settle the network. DIAC allows to change their ID..... still cumbersome
Awesome ❤
Hi Sahil, good video.
So the power from the distribution board only goes to the dali control unit ? And can we have two lets say 3 gang switches to switch on and off the lights from different areas in the room, for example if the doors into the room were in opposites sides?
sir light is not working after changing the new dali ballast ?
Can we use the same dimmable drive for fans to doing slow and fast ??
One question, the ballast coneccted parallel or series
Ok you mentioned in video 🌹
Thanks for reaching 150 subscriber 👍🙏
But sir I do the same connection but not working can u tell me o other connection and can you tell me wire bomber 0.5or 1.5 mm wire use
Dear sir I have 1 request I want know related for motion sensor control panel Wiring form control panel DB to motion sensor and light. should be have in side DB relay fuse contector auto hand mode option plzz make one drawing hope you understand 🙏🙏🙏
really good
Lighting or lightning?
Is DALI switch operate from mobile?
IS THERE IS ANY APPLICATION OR ANY OTHER THING FOR THAT?
Is there any reference for the wire gauge to be used in DALI control systems?
communication is 18/2 AWG. lighting is 12AWG
Mast ha
do this DALI system works with KNX?
Yes, you need a KNX-Dali-Gateway
Nice
So basically each light is controllable seperately in Dali system.
Yes it can be controlled individually or in combination of lights.
i want to design dali system for one of project. can you please support. i am ready to pay aslo
What help you require ?
@@sahilkumare93
Can I have your whatsup number? I can explain
Sir tell me please
Sahil, It’s a lightING not lightNING. Lightning is dangerous you cant control it.
Already mentioned in my comments. 👍
ok
lighting not a lightning bro
It's not lightning, it's lighting
Yeah, it's just pronunciation error. 😊
Bahasa indonesia
its" Lighting" not lightning.😂