Thank you for the nice video and sound effects :) I want to ask you about the wiring of the switch limit I have some switch with two wires and some with three wires
Thanks for watching. The cord with 2 wires is a mechanical switch, one wire go to X++ and COM minus. If you have 3 wires it is a proximity switch and is wired X++ Black wire to COM MINUS and red wire to COM PLUS
Hello, please tell me how do I find out the processing time of the parts before the start of processing ? when the simulation is turned on , the syntax is checked, but the time is not specified
You probably didn't find this function on ddcsv3.1 either, it looks like the programmers didn't take this option into account in this controller, it's a pity, even on old remotes it's possible
Hello, Thanks for your video. Do you know if this is an intercative controller? Meaning let's say if you want to cut on a straigth line is it possible to manually enter Gcode G0 xxxx yyyy and with the spindle on ? Thanks
I've looked and looked but I cannot find a way to change my main display page to INCHES from MM. I've set P001 to IN but it doesn't seem to have any effect.
But I should be able to switch to inch without needing to run a g20 in a program....otherwise, I need to convert everything before I can start running a tool.
Hey thx for taking out time and posting the detailed video in series..... I want to use it for my lathe and that too for two axis only, will this controller be applicable... Also in case if I want to ask you any query related to it may I ask you in future, if yes will you please help me with your email or instagram id....Thx in advance....
Thx for watching. I don't think this controller is good for Lathe. I never tried, but I know there are many alternatives in the marked with a better price tag. www.aliexpress.com/item/32260668115.html?spm=a2g0o.productlist.0.0.5b3231a8WL2Qw6&algo_pvid=6dddb061-4adf-4a1c-ba86-bdabc02f2f82&algo_exp_id=6dddb061-4adf-4a1c-ba86-bdabc02f2f82-50&pdp_ext_f=%7B%22sku_id%22%3A%2212000015572473329%22%7D&pdp_npi=2%40dis%21DKK%21%211756.32%21%21%21%21%21%40210318c916570792704018024ee7b9%2112000015572473329%21sea
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
Muito bem explicado parabéns mestre!!!
Obrigado. Feliz por ajudar
Much help from this thank you
Thank you for the nice video and sound effects :)
I want to ask you about the wiring of the switch limit
I have some switch with two wires and some with three wires
Thanks for watching. The cord with 2 wires is a mechanical switch, one wire go to X++ and COM minus. If you have 3 wires it is a proximity switch and is wired X++ Black wire to COM MINUS and red wire to COM PLUS
thank you , looking forward to see more videos , especially if it explains why stepper motor block or turn wrong sense or just shake ...
thanks again
Please keep the sound at the same level
What is the post processing you are using and which software?
I got the same system but I caint get it to move my motors
Hello, please tell me
how do I find out the processing time of the parts before the start of processing ? when the simulation is turned on , the syntax is checked, but the time is not specified
You probably didn't find this function on ddcsv3.1 either, it looks like the programmers didn't take this option into account in this controller, it's a pity, even on old remotes it's possible
Hello. Please, can you tell me what are the dimensions of that machine? Thanks!!
Just back from work I will messure it tomorrow and let you know
Hello Luis
Messures are as follows
The front panel is 191mm*128mm*5mm
The main body is 191mm*128mm*37mm
Hope it helps.
I set the 374 to enable and ended up with an alarm , any comment thanks Alvin
Hello, Thanks for your video. Do you know if this is an intercative controller? Meaning let's say if you want to cut on a straigth line is it possible to manually enter Gcode G0 xxxx yyyy and with the spindle on ? Thanks
Hello and thank you for watching. Unfortunatly this controler has no Data input (MDI) You will nede the DDCS Expert
@@weitlingD3P Ok thanks. Not so usefull command though.
Please show us how to connect the wires to the controller. I am confused
I've looked and looked but I cannot find a way to change my main display page to INCHES from MM. I've set P001 to IN but it doesn't seem to have any effect.
If you go to Menu #115 you select inch. Anyway your G code will also include the G21 (mm) or G 20 (in)
th-cam.com/video/7YZ_vH53aPE/w-d-xo.html
But I should be able to switch to inch without needing to run a g20 in a program....otherwise, I need to convert everything before I can start running a tool.
@@kurtlyons7123 That you do in line #115 in the menu of the settings
Line #115 is "Y axis protection speed" in the V4.1
Hey thx for taking out time and posting the detailed video in series..... I want to use it for my lathe and that too for two axis only, will this controller be applicable... Also in case if I want to ask you any query related to it may I ask you in future, if yes will you please help me with your email or instagram id....Thx in advance....
Thx for watching. I don't think this controller is good for Lathe. I never tried, but I know there are many alternatives in the marked with a better price tag.
www.aliexpress.com/item/32260668115.html?spm=a2g0o.productlist.0.0.5b3231a8WL2Qw6&algo_pvid=6dddb061-4adf-4a1c-ba86-bdabc02f2f82&algo_exp_id=6dddb061-4adf-4a1c-ba86-bdabc02f2f82-50&pdp_ext_f=%7B%22sku_id%22%3A%2212000015572473329%22%7D&pdp_npi=2%40dis%21DKK%21%211756.32%21%21%21%21%21%40210318c916570792704018024ee7b9%2112000015572473329%21sea
@@weitlingD3P thx for your reply, cheers. Once again thx for posting the videos.....