Did overtime last night As always, thank you for sharing it with us ,Koon Trucking Thank you very much for helping us ASTUTE KOON TRUCKING from Nick Ayivor from London England UK 🇬🇧 ⏰️ 06:43am Good Morning 🙏 🌄
As I've seen more and more tool companies, Mueller, knipex some of the Japanese tool companies have been missed! Not digging on American companies but damn!
I am interested in their tools but. I can’t find where to buy on the web. I have to call them in GA. They really need to get an online store. I found a few of their products on Amazon but not what I was looking for. I think they need to advertise too. I am curious as to what the creeper cost. My Harbor freight creeper is junk. So I want a good one. I will most likely go with a Snap-on.
Koon,Just got in the mail the Craftsman V series 1/4 dr bit and socket set CMMT45751V (the Facom Nano rebranded). Their are many things I like about the set but the 96T ratchet has the highest torque to rotate (the worst) I have ever seen or heard of. The ratchet is thick with lots of engagement between the anvil gear and the pawl, so it should have great ultimate strength and their next to zero slop in the gear set ( the best I have ever seen). I wonder are all the Craftsman v series ratchets like this ?
I have a little bit of everything in there. The real question is what’s in the roll cart because that’s what’s the most used. Toolbox is more for overflow tools that aren’t used regularly
Great stuff... Matt sledge wears me down... Sorry he reminds me of that 23 year old that you start dating to piss off your ex because she is younger but she won't stop talking at all 😂
Weight limit 350 pounds....if you are that big how the fuck.......are you working on these modern cars? I'm a skinny lanky mofo and I was cussing my head off replacing a brake pedal position switch on a 2019 suburban.....lol😂
I've never understood wrench extenders, I can extert enough force by hand to strip a bolt head by hand with a 12 point box end or spread the open end without the need for an extender, a six point socket and breakerbar is what I'd use personally
I use my mid size MK extender all the time. Perfect for breaking nuts loose with a Stahlwille wrench. Mk makes good stuff. Looking at their air hammer. Their clip removers are world class for most plastic clips. Anything they make is usually high quality and well thought out.
Hey great video! We love to see what's new with Mueller Kueps.
I like the ability to use a breaker bar to extend the wrench extender! Mechanics need all the options we can get..
I really need that creeper, and that air hammer looks kind of scary actually
Clay, that green creeper in the background leaning up against the table is THE BEST!!!! The magnets are cool too!!!
I was peeping that nice press kit behind the massive air hammer! Nice products!
I have that table/cart. I absolutely love it.
Did overtime last night
As always, thank you for sharing it with us ,Koon Trucking
Thank you very much for helping us
ASTUTE KOON TRUCKING
from Nick Ayivor from London England UK 🇬🇧 ⏰️ 06:43am Good Morning 🙏 🌄
Watched a fella use that MK monster . He was working on an excavator hub and he said it hit like Mike Tyson .😂
That air hammer probably costs 4 times as much. But well worth it.
Saw it on the tool truck today… $1200 with 3 bits.
Hammer by itself is about 1000. Been waiting on it for more than 6 mos
The guys at TekamoHD love this air hammer. We got them available on our website for a great price right now.
Thanks for the content Clay!!
The creeper is really nice with the carbon fiber look.
Where do u buy the creeper at? A link would be nice to Mueller items!
Good as always
That's one big air hammer think it's cool
As I've seen more and more tool companies, Mueller, knipex some of the Japanese tool companies have been missed! Not digging on American companies but damn!
Another great video!
Ouch! Could see SK in the background and looked more than dead. Really too bad. But MK is awesome. I need to get another extender.
It was at the end of the show. But SK will have a video showing all the new products that are USA made.
That air hammer has to be test by torque test channel👍
The boys at TekamoHD have put that air hammer through its paces. It certainly is Heavy Duty to say the least.
Looks like I might need some more tools.
Clay they should be required to make hd wrenches to match wrench extender
That hammer would be wonderful for breaking down electric motors
I am interested in their tools but. I can’t find where to buy on the web. I have to call them in GA. They really need to get an online store. I found a few of their products on Amazon but not what I was looking for. I think they need to advertise too. I am curious as to what the creeper cost. My Harbor freight creeper is junk. So I want a good one. I will most likely go with a Snap-on.
There's a few MK products I'm interested in, but they are hard to find in the UK.
Koon,Just got in the mail the Craftsman V series 1/4 dr bit and socket set CMMT45751V (the Facom Nano rebranded). Their are many things I like about the set but the 96T ratchet has the highest torque to rotate (the worst) I have ever seen or heard of. The ratchet is thick with lots of engagement between the anvil gear and the pawl, so it should have great ultimate strength and their next to zero slop in the gear set ( the best I have ever seen). I wonder are all the Craftsman v series ratchets like this ?
I need to see torque test channel try out those MK air hammers 😂
"Unlimited POWER!"😂
Yessssssir!!!!
Saw the magnets with Mr joe on Monday. Saw the boxes and wrench extenders on jdtco nick. Was Jersey Nick at the show
Nope, he wasn’t there. bet you didn’t see that tiny wrench extender or that big air hammer
@@KoonTrucking you were the first on the air hammer. It looks great but I do not have any tank rivets to drive this week
Damn that thing would take a bed side off in a hurry I need one of those lol😂
I see the SK folks in the background any sk video coming soon?
I've tried a few newer SK tools since they were sold, quality has become garbage now that it's Chinese made.
The only sk I have are an old set of wrenches that my grandfather had. I was wondering how good the new stuff holds up
@Anthony-wj6xb depends. They have 2 lines now. One is made in China and the other is still made in USA.
From what I have understood is that it's not 2 lines, it's new old stock. All NEW SK is China made, from what I have heard. Damn shame too.
@@shepherd3085 though, I would like to be wrong.
That air hammer is definitely no joke! HD suspension bushings will fall out with the sight of that bad bitch!
Hey clay do you know a model number for knipex butt connector crimpers I can't seem to find them thanks for any help you may have
That dude is so german lol.
Video that SK table
It’s done. Stay tuned
@pumpman8170 it drops today at 5 pm BTW
Should I pull the trigger on a 1/4 snap on fdx mm shallow deeps for 290? Seems like a good deal but not sure what a tool guy would do for pricing
Hell no! They aren’t worth that!
I bought that set for £110, about $130
@@KoonTrucking that’s crazy! So what would you pay off the tool truck?? or your just saying the fdx lineup isn’t worth it?
So Clay what do you have in your toolbox?
I have a little bit of everything in there. The real question is what’s in the roll cart because that’s what’s the most used. Toolbox is more for overflow tools that aren’t used regularly
Great stuff... Matt sledge wears me down... Sorry he reminds me of that 23 year old that you start dating to piss off your ex because she is younger but she won't stop talking at all 😂
Hahaha OMG that’s hilarious! He does talk A LOT!
👍👍👍👍💥💥💥💥💥💥👍👍👍👍
Looks like you found big nasty's Daddys
@3:41 Not a fan of the table. The torque screw that tightens the height adjustment blows out too fast. The monkey crank for the win.
Weight limit 350 pounds....if you are that big how the fuck.......are you working on these modern cars? I'm a skinny lanky mofo and I was cussing my head off replacing a brake pedal position switch on a 2019 suburban.....lol😂
I've never understood wrench extenders, I can extert enough force by hand to strip a bolt head by hand with a 12 point box end or spread the open end without the need for an extender, a six point socket and breakerbar is what I'd use personally
The only time I ever use mine is when doing alignments.
They are mostly used on larger wrenches. 19 and up but people wanted them for smaller sizes so they made them
Use mine on rusty semi trailers some times there's no room to get a socket on the air bag bolts
I use my mid size MK extender all the time. Perfect for breaking nuts loose with a Stahlwille wrench. Mk makes good stuff. Looking at their air hammer. Their clip removers are world class for most plastic clips. Anything they make is usually high quality and well thought out.