This is how I solved the problem with my Samsung 40" LED TV (Model UE40C6000RKXXU). This is not a permanent solution, I probably will need to change the faulty board in the future.
Just did this, and it worked! Took a while for me to locate the area where it needed to be raised. I ordered a T-Con board because ShopJimmy said that was the cause of vertical lines and their crap didn't work, it made my picture worse with colorful dots; so I put back my old T-Con board and did this, it's working great so far! Thank you so much!
fishywtf vertical lines like this actually is the t con board. If you follow Tampa tech he's a TH-camr on here that always talks about vertical lines and fixes tvs I trust him. But if another method works that's great maybe the t-con board you got was garbage but I've never tried it in the oven I'd be scared but everyone saying it worse so
Hi massoud147. I had exactly the same problem as you with a 5,5 years old UE40C6000. I went to a repair center and they would fix it for 550€ (almost the price of a new set). So I searched the internet for a replacement of the mainboard and I found - and tried - this video. And your solution works now for a week PERFECTLY. Many thanks for taking the time to produce the video :-) - It saved me perhaps the cost of a replacement board +-130€ I will report in the future if the "bended" plate keeps going well or if it may have caused other issues. If you do not hear me the first 3 months ... you may take it as good news.
It is a short in either the cable in between the tcon board and main board or where it connects to the main board or tcon board. Changed 2 boards with same problem.
I tried it yesterday my Samsung led smart tv was showing vertical lines but after using this method vertical lines were gone but only for 10 hours then came back again. So I think I will try it again.
Its not grounding its a faulty connection at the BGA and now the board is not fully seated on the thermal pad so it will accelerate the problem much faster that TV is dead now....... Proper repair would be to reflow and replace pad and reseat all connectors.
Dude! T H A N K S !!!! You saved my life! And probably the TV's (samsung UE46C5600UWXXH) too, cause my solution was a precise smack to the back of the TV(which worked, too).. Got a bit drunk to get the courage and fixed it. You are the man!
Merci beaucoup j'avais le même problème des lignes sur la télé et avec ta solution plus de problème plus de ligne merci merci merci thank you(tv led ue46c6000)
Thanks alot for this video - I have the UE55C6000 and will try this solution :) Have you been issued with the stripes since the fix? My TV has the stripes for about 10 minutes but often dissapear when it's "warm".
You are welcome. The stripes have come back but the fix lasted for two years which is not bad for free. I have bought a new samsung Tv and I will try to fix the old one when I have time.
My QLED samsung TV is the same. It shows moving colored vertical bars all over the first 10 minutes. I can’t control the tv in this time but then they all go away when it warms up and doesn’t happen again until next day when I wake up. How long did you tv last with that happening @duc Minh Ly
Thanks for this! I just did it on my Samsung, same board. I did some further troubleshooting and I think I narrowed it down to that chip with a heatsink which is at 10 o'clock from the big one. It gets very hot and I think that the soldering (BGA) is loose to it. Not much to do unfortunately, I think your trick is the best. Question is, how long it will stay OK.
After the repair it worked perfectly for about two years then it started to happen again but only for a minute or so, then the lines would disappear as soon as the TV warmed up. Occasionally it needs a little tap on the back to get the picture perfect.
Exactly the same as mine TV. Thank you for your advice. I gently tapped on the chip with the heatsink and the vertical lines disappeared!!! Thank you and Massoud for your valuable advices!!!
@@massoudmakes Just an update.The HDMI connection also suffers because of this I think. Mine got so bad, that I decided to trash it, got a newer, 4K TV instead.
massoud147 I actually fixed my vizio 50 inch smart tv. Had the same problem, first vertical lines, then half the screen had blue and the other was clear. I just changed the ribbon cable area to opposite sides and then reseated and it fixed the issue. No more annoying green/red vertical line madness. Saved me 400 plus tax in tech repairs. Thank goodness for people on youtube.
I just started getting a few vertical lines and one being blue on the left hand side of my Samsung #UN55ES7500FXZA. I wonder if this will work for this model.
Yep......packed the chip feeding the Tconn board connectors and all green lines across thefull screen completely rectified. Why dont these manufacturers sort their act out. Bodge fixes like these are pathetic and show how we NEVER went to the Damned Moon over fifty years ago.
@@massoudmakes I understand, there are some oddball cures one of which is nonsense, at least yours has a bit of logic to it..stay safe. Thanks for the reply
My Samsung led smart TV is showing solid black and thin multi coloured lines that disappeared using this method but came back after 6 hours. Now this method is not working on my tv. Please help.
This is a DIY method that worked for me. Not all TV are the same and different reason might be causing this problem. As I am not an expert I cannot help you, sorry.
The tested problem is cold joints of SDP91 chip (top left upper one, it is under the heatsink). I have 2 boards with the same problem. pressing the chip, lines dissapear. I have tried to oven one board, with no luck, the problem still present. Las weekend. i reflow the sdp91 chip , and total fail. No operation anyymore. The other one the same, but i get the chip out.... Because i have no tools to reball my current chip, I' am going to purchase a new sdp91 (ball installed) chip from aliexpress, and try to solder it with my heat gun and some compatible flux....
i have a Samsung UN55D8000 and after 3 or 5 minutes appears a vertical line on one side of the screen this will fit the problem? the vertical line is not dark turns to different color depends on picture
massoud147 he probably has a t-con board issue vertical lines are definitely a t-con board is she or a cable issue or in your case just pushing the board in cuz it was loose
Sir, I need your help. I am from India. I am having Samsung f5500 plasma 51". I am having a vertical line for years, now suddenly there are horizon (light black dotted) lines. How to solve. Can't trust a local repair person
I found the main board online for my Samsung TV. If it happens again, I'm going unplug all the connectors inside and reconnect to see if it fixes permanently. But thanks anyway.
It worked for me. They key is to set that screw below the board.. once I did it, it fixed the issues. Sometimes the lines show, but with a really gentle tap on the back of the screen, they go away.
I have a Emerson 42 inch with a weird issue whenever I smack it in a very specific spot or apply pressure in that spot lines that are like black and dotted appear on the right hand side of screen I managed to temporarily fix it just now but if I were to jiggle the t.v. enough it would probably screw it up again I am not sure if it's a lcd or led but any help would be appreciated my mom refuses to get rid of it and it drives me crazy having the stupid lines on it
As I'm not an expert I cannot help you, sorry. With my TV, I noticed that the problem was some sort of loose connection on the board and by slightly bending it I managed to restore the connection and got rid of the lines. This is not the best solution but for me it worked. The proper way is to find the exact fault and then do the repair which might involve replacing the faulty board.
Hi Massoud, i was so frustrtated i really wanted to throw the thing out . I saw your idea, great , but i can not achive a permanent fix. Even though it worked. I have to slightly tap the TV after switching it on (2 Times) and then the pic stays. Until i switch it off and it starts from teh beginning again. Is there anybody who soldered anything since the Board with components is so tiny ?!? Obviously it has to be some sort of joint that is broken or cold through thermal expansion during previous operation. Thanks for the awesome idea though still keeps my TV working for a few more month.
+Andy Mills Hi Andy, the only work that's been done is the one I've shown in the video. My TV is still going a year on, only on very rare occasions when it is turned on it shows very faint lines but then as soon as it warms up (a few seconds) the lines disappear. As I mentioned in the comments before the only time I experienced lots of line on screen was when the TV was wall mounted which I no longer do. Thanks for your comment and thanks for watching.
hay bro i have the same problem i just bought led 29um57 lg after 15 days a single vertical line appeared on my led when i push that border right down of that line its gone for a while but after some time its appear again so my question is that if i follow your video can i fix like it ?
i have bought 3 tcon boards brand new ALL have the same issue. this fix is temporary as the fault will come back after used for a few months. use the time to save for a new TV. NOT a Samsung this problem is across the board of models and sizes. (no pun intended) Since this usually does not happen until after 2 year warranty is expired Samsung has no plans to change the process.
@@massoudmakes thanks a lot..but do you think even 1% that this is the same problem and you resolution is worth a shot..bcoz m also not an expert just trying to avoid opening up the whole console..
With my tv I noticed that by pressing on the top right side on the back I could get the picture perfect again, so I knew that is was some sort of loose connection and the rest you can see on the video.
Plz I have 50inch Samsung tv which I just bought a new power board from Samsung and I just mount it on, the light is on and it makes normal Samsung sound but the pic won't show.
de acuerdo con la capuchas .. pero este es un explicacion que tiene la placa . este no es una solucion . deves de hacer un reflon profundo o un rebaling la este placa por eventual una reparacion correcta .NO DURARA .
I want to do this but I am worried about being electrocuted when I am testing where to raise the T-Con board? Should I wear rubber sandals or something like that?
It all depends on what is causing the problem, I found the problem point on my TV and managed to find a solution for it. As I am not an expert I cannot be of any more help, sorry.
+massoud147 my Samsung LCD has the same problem as yours, vertical lines. I found that slightly jiggling the HDMI ports would make the lines go away. But it's gotten to the point now that jiggling those vertical lines no longer resolve the issue.
massoud147, I followed your instructional video to remove the back cover off my TV and discovered that I had a broken HDMI port. My TV is working flawlessly after removing that broken port from the board. Thanks for your video! 👍🏼
Bm dia gente, tenho um tv led super general ele acende os ledes nao tem som e nem imagem e ao ligar ele pisca duas vezes e acende os ledes. Oque faço peço ajuda
Please help me my Samsung LED TV is having problem of light blue vertical lines I don't no what to do and even my TV is not that to old please help me to solve this problem.
Antonio Carnevale the board that's the t-con has like 6 cables connected to it like three on each side very thin and I believe they're brown cables at the top somewhere it should say t con on it.
no that isn't, that is the mainboard, and this tv has no tcon board i believe, everyone keeps saying replace tcon board in multiple videos, but this tv doesnt have one, i think at least i kind find it in my tv, and i have the exact same problem as this one on the video, but this didnt help me at all either :)
solved my problem (cleaning the connection heads didn't work). instead of putting the screw under the board, we loosened the screw and then wrapped a cable tie under that particular screw.
I also had several vertical lines in a Samsung TV Just doing a complete setup of the TV - like when it was first put in operation solved the problem. Part of the set up is to have the TV re-scan for channels . Resulted in no more vertical lines. No dissemble of TV was needed.
Solved my problem as well! Ordered a t-con for no reason! Should perhaps order a new main board since this fix is most likely temporary and just patching a broken solder point.
The problem is in the soldering balls of some bga chip and bending slightly the pcb the cracked join fixes,but needs a real reflow until all the solder balls underneath bga chip melt and form new connections.
The fix lasted for about two years but now sometimes when I first turn the TV on I get lines for a few seconds and then they go away when TV gets warm.
Just did this, and it worked! Took a while for me to locate the area where it needed to be raised. I ordered a T-Con board because ShopJimmy said that was the cause of vertical lines and their crap didn't work, it made my picture worse with colorful dots; so I put back my old T-Con board and did this, it's working great so far! Thank you so much!
You are welcome. I am happy that it helped you.
fishywtf vertical lines like this actually is the t con board. If you follow Tampa tech he's a TH-camr on here that always talks about vertical lines and fixes tvs I trust him. But if another method works that's great maybe the t-con board you got was garbage but I've never tried it in the oven I'd be scared but everyone saying it worse so
Ok
Hi massoud147. I had exactly the same problem as you with a 5,5 years old UE40C6000.
I went to a repair center and they would fix it for 550€ (almost the price of a new set). So I searched the internet for a replacement of the mainboard and I found - and tried - this video. And your solution works now for a week PERFECTLY.
Many thanks for taking the time to produce the video :-) - It saved me perhaps the cost of a replacement board +-130€
I will report in the future if the "bended" plate keeps going well or if it may have caused other issues. If you do not hear me the first 3 months ... you may take it as good news.
+Marc Vanschoonbeek I am glad it helped you. Thanks for watching and your comment.
Lgsfgcyd per l'inconveniente è rimasto per l'inconveniente e vi invitiamo a non copiarla a non copiarla a non copiarla a non copiarla
Thank you! This worked for my Samsung. For my TV, the connection was faulty in the bottom right corner.
You are welcome, I am glad it worked for you.
This is crazy, you have to be sooo lucky to find that fix!
It is a short in either the cable in between the tcon board and main board or where it connects to the main board or tcon board. Changed 2 boards with same problem.
Thank you so much for the video. Have the same issue with my Samsung smart led tv UA55D7000LM. Will try it out and get back to you.
Does it solve ur tv problem by doing so?
I tried it yesterday my Samsung led smart tv was showing vertical lines but after using this method vertical lines were gone but only for 10 hours then came back again. So I think I will try it again.
Wow, not the same model but this (along with blowing a ton of dust out of my tv) seemed to do the trick lol. Thanks!
You are welcome.
you're simply the best! fixed and work like a charm!
+Tiziano Cavalli Glad it helped.
What did you exactly do? Open it up and then what?
At minimum it shows how fragile the board grounding can be...nice work...
Its not grounding its a faulty connection at the BGA and now the board is not fully seated on the thermal pad so it will accelerate the problem much faster that TV is dead now....... Proper repair would be to reflow and replace pad and reseat all connectors.
I just did this and can confirm it works ! Thanks man
You are welcome, I'm glad it worked for you.
Still working for you
Hvala na pomoci i Veliki pozdrav😀!
You are welcome.
Dude! T H A N K S !!!! You saved my life! And probably the TV's (samsung UE46C5600UWXXH) too, cause my solution was a precise smack to the back of the TV(which worked, too).. Got a bit drunk to get the courage and fixed it. You are the man!
You are very welcome, I am happy that it helped you and thanks for watching.
Thanks, I will give it a go, with a second set of eyes to help me remember every step: mine is a UN40D6000SF smart tv maybe 6 years old
Good luck and thanks for watching.
Thanks very much! My TV have the same problem and now is fixed!!!!
+Fai Chan You are welcome , I am glad it helped you.
It is a pity you don't use that wonderful gift of speech.
Merci beaucoup j'avais le même problème des lignes sur la télé et avec ta solution plus de problème plus de ligne merci merci merci thank you(tv led ue46c6000)
Bonjour et quand ya pas de ligne c est flou avec des taches bleu sur un cote l autre coté c est net ça marche ou pas?
Good job,nice tools open screw..
Thank you.
i have 55 smart led samsung but with horizontal lines will this work the same with it.
Exactly, the lines spoil the fun of me watching things.
Thanks alot for this video - I have the UE55C6000 and will try this solution :) Have you been issued with the stripes since the fix? My TV has the stripes for about 10 minutes but often dissapear when it's "warm".
You are welcome. The stripes have come back but the fix lasted for two years which is not bad for free. I have bought a new samsung Tv and I will try to fix the old one when I have time.
Same issue here...
My QLED samsung TV is the same.
It shows moving colored vertical bars all over the first 10 minutes. I can’t control the tv in this time but then they all go away when it warms up and doesn’t happen again until next day when I wake up.
How long did you tv last with that happening
@duc Minh Ly
Thank you so much sir. It worked perfect for me!
You are welcome, I'm happy that it helped you.
Thanks for this! I just did it on my Samsung, same board. I did some further troubleshooting and I think I narrowed it down to that chip with a heatsink which is at 10 o'clock from the big one. It gets very hot and I think that the soldering (BGA) is loose to it. Not much to do unfortunately, I think your trick is the best. Question is, how long it will stay OK.
After the repair it worked perfectly for about two years then it started to happen again but only for a minute or so, then the lines would disappear as soon as the TV warmed up. Occasionally it needs a little tap on the back to get the picture perfect.
Exactly the same as mine TV. Thank you for your advice. I gently tapped on the chip with the heatsink and the vertical lines disappeared!!! Thank you and Massoud for your valuable advices!!!
@@massoudmakes Just an update.The HDMI connection also suffers because of this I think. Mine got so bad, that I decided to trash it, got a newer, 4K TV instead.
@@johnkarapanos1166 You are welcome.
Did you finally get to change the board?
Or is the fix still working good for you?
I could not find a new board and now sometimes I get the lines again so I bought a new TV.
@@massoudmakes Told ya!
Its the T-con board with the ribbon cables. Or maybe its the flex cables connected to the lcd themselves
I am sure it is the board as it only works when I lift the corner of the board without moving any cables or ribbons.
massoud147 I actually fixed my vizio 50 inch smart tv. Had the same problem, first vertical lines, then half the screen had blue and the other was clear. I just changed the ribbon cable area to opposite sides and then reseated and it fixed the issue. No more annoying green/red vertical line madness. Saved me 400 plus tax in tech repairs.
Thank goodness for people on youtube.
I just started getting a few vertical lines and one being blue on the left hand side of my Samsung #UN55ES7500FXZA. I wonder if this will work for this model.
Yep......packed the chip feeding the Tconn board connectors and all green lines across thefull screen completely rectified. Why dont these manufacturers sort their act out. Bodge fixes like these are pathetic and show how we NEVER went to the Damned Moon over fifty years ago.
What about Samsung model no: UA43K5500AGXXP..I detached the back no screws inside also. Can you help, please..Dan
I don't know if this works on all TV's. I tried this on my TV and it worked(to some extent). As I am not an expert I can't help, sorry.
@@massoudmakes I understand, there are some oddball cures one of which is nonsense, at least yours has a bit of logic to it..stay safe. Thanks for the reply
My Samsung led smart TV is showing solid black and thin multi coloured lines that disappeared using this method but came back after 6 hours. Now this method is not working on my tv. Please help.
This is a DIY method that worked for me. Not all TV are the same and different reason might be causing this problem. As I am not an expert I cannot help you, sorry.
do you have two screws in the same hole? how is one screw behind the board and in front too?
There is just one screw and it is on the TV body behind the board. The screw driver goes through the board to adjust the screw which is behind it.
The tested problem is cold joints of SDP91 chip (top left upper one, it is under the heatsink). I have 2 boards with the same problem. pressing the chip, lines dissapear. I have tried to oven one board, with no luck, the problem still present. Las weekend. i reflow the sdp91 chip , and total fail. No operation anyymore. The other one the same, but i get the chip out....
Because i have no tools to reball my current chip, I' am going to purchase a new sdp91 (ball installed) chip from aliexpress, and try to solder it with my heat gun and some compatible flux....
It sounds complicated, I don't know how to do that. Good luck anyway, hope it works.
i have a Samsung UN55D8000 and after 3 or 5 minutes appears a vertical line on one side of the screen this will fit the problem?
the vertical line is not dark turns to different color depends on picture
I am not an expert, I tried this on mine and it worked.
massoud147 he probably has a t-con board issue vertical lines are definitely a t-con board is she or a cable issue or in your case just pushing the board in cuz it was loose
Daury Hernandez y con board issue most likely or could be a cable issue or could be the the board is loose
I have the same problem in the same Samsung UN55D8000. did this help? or what you do to fix your problem?
Buenas tengo el mismo problema en el mismo televisor Samsun UN55D8000. Lograste resolverlo? Si lo resolviste podrias decirme como lo lograste?
Sir, I need your help. I am from India. I am having Samsung f5500 plasma 51". I am having a vertical line for years, now suddenly there are horizon (light black dotted) lines. How to solve. Can't trust a local repair person
I found this solution by trial, as I am not an expert in TV repair I cannot help you, sorry.
@@massoudmakes okay
I have the same problem. Did you eventually replace the T-Con Board or the Main Board? I want to get the right one the first time.
I could not find the replacement board that had the fault so eventually I bought a new TV. I don't know what the board is called.
I found the main board online for my Samsung TV. If it happens again, I'm going unplug all the connectors inside and reconnect to see if it fixes permanently. But thanks anyway.
You are welcome.
Thank you. i will try to fix my sansung 55" with the same problem
Good luck with the repair and thanks for watching.
It worked for me. They key is to set that screw below the board.. once I did it, it fixed the issues. Sometimes the lines show, but with a really gentle tap on the back of the screen, they go away.
Which board is it?? T-con, powerboard??
I don't know what it's called, sorry.
It's called a main board. Open up the back and there should be a part number on it.
I have a Emerson 42 inch with a weird issue whenever I smack it in a very specific spot or apply pressure in that spot lines that are like black and dotted appear on the right hand side of screen I managed to temporarily fix it just now but if I were to jiggle the t.v. enough it would probably screw it up again I am not sure if it's a lcd or led but any help would be appreciated my mom refuses to get rid of it and it drives me crazy having the stupid lines on it
As I'm not an expert I cannot help you, sorry. With my TV, I noticed that the problem was some sort of loose connection on the board and by slightly bending it I managed to restore the connection and got rid of the lines. This is not the best solution but for me it worked. The proper way is to find the exact fault and then do the repair which might involve replacing the faulty board.
Thanks for the video. How fix whire vertical lines on samsung un55ju650df? Thanks
can this fix horisontal lines as well?
I don't know, sorry. My tv only displayed vertical lines and later on some random patches and both of them went away with my fix.
Would this be applicable to a Samsung qled tv as well? I’m looking to maybe try this out!
I don't know, I am not an expert, sorry.
My samsung LED 2 lines blue and yellow how can you do this problem
I am not an expert so I cannot help you , sorry.
Hi, I have the same problem but mine is smart tv what should I do? Is this will work on smart too ? Please reply
Thanks
Not all tv's are the same and as I am not an expert I cannot help you, sorry. I just did a DIY job on my tv and it worked.
Pourquoi les vidéos de coupent ?
Huh! That's it😨😱. I just learnt something thanks!
You are welcome.
Worked a treat, thanks!
You are welcome.
Hi Massoud, i was so frustrtated i really wanted to throw the thing out . I saw your idea, great , but i can not achive a permanent fix. Even though it worked. I have to slightly tap the TV after switching it on (2 Times) and then the pic stays. Until i switch it off and it starts from teh beginning again. Is there anybody who soldered anything since the Board with components is so tiny ?!? Obviously it has to be some sort of joint that is broken or cold through thermal expansion during previous operation. Thanks for the awesome idea though still keeps my TV working for a few more month.
+Andy Mills Hi Andy, the only work that's been done is the one I've shown in the video. My TV is still going a year on, only on very rare occasions when it is turned on it shows very faint lines but then as soon as it warms up (a few seconds) the lines disappear. As I mentioned in the comments before the only time I experienced lots of line on screen was when the TV was wall mounted which I no longer do. Thanks for your comment and thanks for watching.
hay bro i have the same problem i just bought led 29um57 lg after 15 days a single vertical line appeared on my led when i push that border right down of that line its gone for a while but after some time its appear again so my question is that if i follow your video can i fix like it ?
+ali usman It all depends on what is causing it. I am no expert I only found the solution to mine after I opened it and a bit of trial and error.
maybe but its looking we both have the same prob
My tv's image and sound begins to brake until it is gone and the screen turns dark gray . Any suggestions?
Sorry, I don't know what could be causing it.
mine has horizontal lines, does this trick still work?
I am no expert so I don't know, sorry. It depends on what is causing it, in my case this method worked.
Does anyone know what this board is called technically? I'm having the same issue on my Samsung UN46D6000SF and wanted to buy the part online. Thanks!
I tried to find it online but no luck.
its called the t-con board (timing and control board)
i have bought 3 tcon boards brand new ALL have the same issue. this fix is temporary as the fault will come back after used for a few months. use the time to save for a new TV. NOT a Samsung this problem is across the board of models and sizes. (no pun intended) Since this usually does not happen until after 2 year warranty is expired Samsung has no plans to change the process.
I have the same kind of tv with the same problem, going to try it out. DId you ever solve the issue?
@@Highphi420 You had three as in went through 3 boards?
Is this technic workable for samsung le40a656 ?
I am not an expert so I cannot advice you, sorry. I just tried this method on my tv and it worked.
Hi my tv model is samsung ua55d8000
My tv recently started showing vertical lines and they keep on increasing..does this will solve this problem
Not all tv's are the same and as I am not an expert I cannot help you, sorry. I just did a DIY job on my tv and it worked.
@@massoudmakes thanks a lot..but do you think even 1% that this is the same problem and you resolution is worth a shot..bcoz m also not an expert just trying to avoid opening up the whole console..
With my tv I noticed that by pressing on the top right side on the back I could get the picture perfect again, so I knew that is was some sort of loose connection and the rest you can see on the video.
My TV is dim on the right side will this fix?
I don't know, sorry.
You probably got dry joint somewhere on this board.Reflow it.Its a better solution
Devan Pookie Finding a dry joint on such a detailed circuit, now that's a job or is there a quick way?
Search for reflow a board.You'l figure it out.
Want to fix it yourself involves a little work mate.
Plz I have 50inch Samsung tv which I just bought a new power board from Samsung and I just mount it on, the light is on and it makes normal Samsung sound but the pic won't show.
+Laadi Pumi As I am not an expert I don't know what could be causing this, sorry. I tried this on my TV and it worked.
i have a same problem in samsung es7500 model can u fix it
I am not a TV repair engineer, I tried this DIY method on my TV and it worked yours might be different.
de acuerdo con la capuchas .. pero este es un explicacion que tiene la placa . este no es una solucion . deves de hacer un reflon profundo o un rebaling la este placa por eventual una reparacion correcta .NO DURARA .
worked a treat, thanks soooo much! !!!
You are welcome, thanks for watching
Still working for you
in deutschland nennt man das fusch reperatur In Germany this is called fusch repair
I want to do this but I am worried about being electrocuted when I am testing where to raise the T-Con board? Should I wear rubber sandals or something like that?
TV was unplugged during repair until the adjustment and then an insulated electrician's screw driver was used.
ya_boy_NOTE that's okay man Cinema 6 Theaters
loose solder connection all it is
I have dark vertical lines at my samsung ue46d8000
Can i fix this?
I am not an expert so I cannot advice you, sorry. I just tried this method on my tv and it worked.
LED 24inch no dispaly and vertical line problem 28LA452A.TA so the salution
I don't know, I am not an expert, sorry.
mi pantalla se le hicieron unas rallas de colores verticales y horizontales si se ve como se le pueden quitar
hey it was a free fix even if it was a temp fix.
+SteelCity1981 Exactly and it is still going.
Will this work on a Samsung LCD TV?
It all depends on what is causing the problem, I found the problem point on my TV and managed to find a solution for it. As I am not an expert I cannot be of any more help, sorry.
+massoud147 my Samsung LCD has the same problem as yours, vertical lines. I found that slightly jiggling the HDMI ports would make the lines go away. But it's gotten to the point now that jiggling those vertical lines no longer resolve the issue.
Sorry I don't know what is causing this problem on your TV.
massoud147, I followed your instructional video to remove the back cover off my TV and discovered that I had a broken HDMI port. My TV is working flawlessly after removing that broken port from the board. Thanks for your video! 👍🏼
You are welcome. I am glad you managed to fix it.
thanks for sharing.
+Khamchan Sahatoo You are welcome.
Samsung model 4003 led me Motherboard me problem he or universal motherboard lagane ke liae kya karna chahiye
Sorry. I am not an expert so I cannot help you.
Merci beaucoup pour l'idée.
You are welcome.
Turn 'till breaks then back up a hair...
Bm dia gente, tenho um tv led super general ele acende os ledes nao tem som e nem imagem e ao ligar ele pisca duas vezes e acende os ledes. Oque faço peço ajuda
Sorry, I don't know.
Thanks a lot!!
You are welcome.
bravissimooo...aggiustato
Good.
nice
Thank you.
Slm 3andi même problème takder t3awni sahit
Please help me my Samsung LED TV is having problem of light blue vertical lines I don't no what to do and even my TV is not that to old please help me to solve this problem.
Not all tv's are the same and as I am not an expert I cannot help you, sorry. I just did a DIY job on my tv and it worked.
genius
+hatchimmmmm Thanks.
This fix worked only for a week and then the green lines reappeared.
Yes that could happen, mine came back after a year or so.
merci
You are welcome.
uhh... working on carpet while wearing socks?
Hi sr
This is not repair.
As I said in the description this is how I solved the problem, I never claimed to be a proper repair.
Samsung shitty TV...I'll never buy more !
The Image quality of the screen is very good even now, it is the way it is put together that caused the problem.
Samsung TV waste
hi los canection
Quê????? Mentira
Did you put a screw back in the very top left?
No, I left that on out so that the screw below it could push the board away from screen.
Very good job/idea! But, i don't think is the board for herself, maybe is the ribbon cable the problem??? Anyway, is that the tcon?
+vaccaro luisa I don't know what the board is called.
Antonio Carnevale the board that's the t-con has like 6 cables connected to it like three on each side very thin and I believe they're brown cables at the top somewhere it should say t con on it.
no that isn't, that is the mainboard, and this tv has no tcon board i believe, everyone keeps saying replace tcon board in multiple videos, but this tv doesnt have one, i think
at least i kind find it in my tv, and i have the exact same problem as this one on the video, but this didnt help me at all either :)
solved my problem (cleaning the connection heads didn't work). instead of putting the screw under the board, we loosened the screw and then wrapped a cable tie under that particular screw.
Does it still work? I've tried this and it works temporarily. If you knocked the TV the lines reappear
I know what I'll be doing this weekend. I'll let you guys know if this resolved the same problem on my Samsung UN40D6000sfxza.
How magicala. Thanks
I also had several vertical lines in a Samsung TV Just doing a complete setup of the TV - like when it was first put in operation solved the problem. Part of the set up is to have the TV re-scan for channels . Resulted in no more vertical lines. No dissemble of TV was needed.
Solved my problem as well! Ordered a t-con for no reason!
Should perhaps order a new main board since this fix is most likely temporary and just patching a broken solder point.
The problem is in the soldering balls of some bga chip and bending slightly the pcb the cracked join fixes,but needs a real reflow until all the solder balls underneath bga chip melt and form new connections.
👍👍👍👍👍👍
solda solta ao envergar a placa a solda encosta, o certo seria da calor a placa com fluxo de solda..esse serviço ai é um improviso
Verdade.
MAN AGARRALO CON UNA PISTOLA DE CALOR SIN DERRETIR NADA OJO !!!!! SINO REPASA LAS SOLDADURAS DUDOSAS
Thank you so much bro
It did work for me
Many thanks again, God bless you
You are welcome, I'm glad it worked for you.
thank you very much for your video tutorial, I could repair my 100-inch monitor but just served me
You are welcome and thanks for watching.
hai.my led 60"samsung tv appeared white vertical bar in the center of the lcd screen.i do need and advice how to solve the issue.tq
so what did you do at 1:16?? you put the screw back BEHIND the board? and then relieved tension by backing off the screw on the board?
Yes the screw is behind the board and by undoing it I managed to bend that corner just enough away from TV body to get the perfect picture.
What may be the cause?
hoy 11 de Marzo de 2020 acabo de hacer lo mismo y funciona a la perfeccion gracias por el aporte thanks
You are welcome and thanks for watching.
how long could this fix your tv? when had you the problem again?#
The fix lasted for about two years but now sometimes when I first turn the TV on I get lines for a few seconds and then they go away when TV gets warm.