Hi Calas. Use a mild acid solution of White vinegar & water mix 70% vinegar/ 30% water blend. Soak the saltwater corroded part in the solution over night or 24 hours. Thus allowing the trellises to neutralise the saltwater corrosion. 🇭🇲
Hey Ernesto you are a library in Sea doo thanks i sew the video couples time and difficult to get you knowledge about all of this differences. i learn to much with you i mean try !!!
2011 Seadoo GTI jet pump was completely rebuilt. I only reused the propeller, everything was bought OEM and it still makes almost the same sound as before when the bearing was in very bad condition. Is this normal?
Hi, how are you doing. I like north of Houston and I really enjoy seen your videos. Thanks for uploading them. I have a question, I bought Sea Doo 3d 2004. My mechanic says that this model gives a lot of problem (2 strokes); and he is recommending me to change the engine to a 4 stroke carburetor, no fuel injection. I really appreciate you opinion on this matter.
Thats usually the case. When you piece together things, they usually end up costing more in the end. Labor to modify things is not cheap. Also, consider the resale value when you go to sell the Ski. People will pay you a fraction of what the original is worth. Yep, that's how it always seems to go. Think you're saving a bit here and there, but it sneaks up on you. Suddenly, you've spent way more than you would have initially. It's like a sneaky little trap, honestly. It's better to just get a new ski upfront.
Thank you. I'm from Pennsylvania after watching your channel. I bought a 2004 rxp 215 with a blown engine and found a block and head that needs some love. also love the work you do and all the good info
2011 gti sank. after water and oil exacted properly fuel pump and power works sometimes sometimes just a rely click any ideas .... also what's the average cost to have a 130 maxed without causing damage
i can never understand why seadoo make this Carbon Seal crap makes no sense why not do it like Yamaha or Kawasaki. For Yamaha and Kawasaki there is no maintenance and no Problems for this Seal Driveshaft to Engine. The Saltwater abuse is is absolutly ridiculous. 2021 is a new ski and they look death. I work a lot on 2005 or even older Freshwater skies and they look better lol.
Hi Calas.
Use a mild acid solution of White vinegar & water mix 70% vinegar/ 30% water blend.
Soak the saltwater corroded part in the solution over night or 24 hours.
Thus allowing the trellises to neutralise the saltwater corrosion. 🇭🇲
Marc Anthony from Temu 🤣🤣🤣
Hey Ernesto you are a library in Sea doo thanks i sew the video couples time and difficult to get you knowledge about all of this differences. i learn to much with you i mean try !!!
The switch 230s had a recall that required drilling a hole there in the resonator to route a hose from the cat! I hated that recall!
With Record Setting-Performance , superior fuel- efficiency and proven-reliability , Rotax engines defines the industry standard in every category.
I donk have a jet ski , but love watching your videos 😊
Eso fue una pesadilla , tanta piezas combinadas 😂 brutal ese trabajo calas!! 🔥
GREAT JOB ON PUTTING THE SKI TOGETHER...... MUST OF FELT LIKE A PUZZLE......ONLY THE BEST CAN DO THAT......#1
2011 Seadoo GTI jet pump was completely rebuilt. I only reused the propeller, everything was bought OEM and it still makes almost the same sound as before when the bearing was in very bad condition. Is this normal?
What kind of sound is it making?
@ 👍, like the same one before rebuilt the pump.
@@orlandogonzalezfernandez890 yes they don’t last that long specially in saltwater maybe three years
Hi, how are you doing. I like north of Houston and I really enjoy seen your videos. Thanks for uploading them. I have a question, I bought Sea Doo 3d 2004. My mechanic says that this model gives a lot of problem (2 strokes); and he is recommending me to change the engine to a 4 stroke carburetor, no fuel injection. I really appreciate you opinion on this matter.
4 stroke is the way
@@DZnats Thanks. I'll do it then.
It all depends. If you are looking for reliability, I definitely say 4 stroke engines are more efficient.
@@DessiLu14 Thanks, I really like the style of the 3d. Hope it doesn't lose power. I have already told my mechanic to change the engine. Thanks!
Frankin-Seadoo? Is it really worth it? Did he actually save $$$$? and what about resale?
@@pablogimenez8369 yes it’s half the price of a new Seadoo
No, I'm the owner and I got everything almost 17k and I'm still spending, it's not worth it
Thats usually the case. When you piece together things, they usually end up costing more in the end. Labor to modify things is not cheap. Also, consider the resale value when you go to sell the Ski. People will pay you a fraction of what the original is worth. Yep, that's how it always seems to go. Think you're saving a bit here and there, but it sneaks up on you. Suddenly, you've spent way more than you would have initially. It's like a sneaky little trap, honestly. It's better to just get a new ski upfront.
sooooo, is that IDF PTO housing for sale for cheap?
Who do you use to do your machine work on the seadoo engines
Palm Beach Motor Machine Shop
Thank you. I'm from Pennsylvania after watching your channel. I bought a 2004 rxp 215 with a blown engine and found a block and head that needs some love. also love the work you do and all the good info
You must have good guys nearer you? Try Kawi they are in NY and should have some nearer ideas?
I need to know. i need to know tell me Calas, I need to know
Frankenstein seadoo
2011 gti sank. after water and oil exacted properly fuel pump and power works sometimes sometimes just a rely click
any ideas .... also what's the average cost to have a 130 maxed without causing damage
would have been cheaper to have just bought a newer ski and scrap the old cr@P
I think he saved some money.
If he got a good deal on the hull. I'm sure he saved a bunch of money going this route. Definitely a budget build
@@DZnats You're in a mistake, friend, that's what I thought, I spend a lot more than you think
Can you convert a 215 to 300?
@@danielnesin1905 yes $$$$
What was the total cost of going this route if you dont mind me asking? Did Marc Anthony end up saving money?
@@fredericosanchez5318 yes
noo
Que arroz con mango este projecto!
Lmfao🤣🤣
Tremendo arroz con mango. 🥭
great videos
Which drive shaft did you end up using?
@@mandrakeelmago1770 22
How did you get 77 MPH out of a 230 engine?
I believe he converted the 230 to a 300 . He talked about the flywheel and cam and super charger being different.
#1 You have to see calas #2 Spend a lot of money 💰😂
i can never understand why seadoo make this Carbon Seal crap makes no sense why not do it like Yamaha or Kawasaki.
For Yamaha and Kawasaki there is no maintenance and no Problems for this Seal Driveshaft to Engine.
The Saltwater abuse is is absolutly ridiculous. 2021 is a new ski and they look death. I work a lot on 2005 or even older Freshwater skies and they look better lol.
Motorbike goggles……
Is this guy really saving money building this or is it best just to buy a 300 model? 🤔
If he got the hull for a good deal, then I say yes.