How to modify a SERVO for Continuos Rotation - DIY Hack

Welcome to MrExpert
Recently, I did a lots of project based on Modified Servo. So, I thought why not upload a separate video of the modification.
This will help me simply refer to this video when ever needed, instead of showing it in each of the project Video.
Thankyou :)
Checkout more of my Video:
6 Amazing 3D Prints / 3D Printed Things / Gadgets | Life Hacks
• 5 3D Printed objects -...
15 Awesome Life Hacks
• Video
Plz Like and Share this Project. SUBSCRIBE for more Cool Videos goo.gl/4eNKQW
----------
Checkout more of my videos:
5 USB Gadgets you can make at home
• 1 2 3 4 5 Incredible U...
My Hot Glue Play Button
• Video
Make a Mini Generator
• How to make a Mini GEN...
How to make a USB Fan - PC Fan Hack
• How to make a USB FAN ...
How to Make a Mini Hover Bike - Colin Furze Style
• Make a Mini HoverBike,...
How to Make a Vacuum Cleaner
• How to make a Vacuum C...
------****--------
Plz SUBSCRIBE for more Cool Videos / @mrexpert
-----

[@IAMEX314]

I've been looking for a way to use a servo or some type of drive motor to push in and out for a short distance. Watching your video gave me some 💡s . Thank you.

[@philliptoone]

Well, that is one way of doing it. And I had assumed you would just disconnect the potentiometer to give a constant error to the feedback so that the speed could be controlled from a microcontroller. I'm curious why you bothered to remove and modify the potentiometer if it is now only used as a output shaft.

[@4Nissankas]

hey buddy ..how do you connect the wires at last,that bi is not there..i did the same as you did n canot run the motor as wire connection !!1..if you could advise would be great!thx sam

[@Nathan-zg5kp]

0:12 OCD crooked sticker

[@danielesp3458]

This work with 1.5v AA baterry?

[@grhosso]

Hey, can I modify a cheap transmitter to use it with buttons? If I push and keep psuching a button, servo moves. My idea is to get a very cheaper 2 channels transmitter, and exchange the trigger and the wheel by simple buttons..do you have a video about it? thanks!

[@RottnRobbie]

What you're doing is exactly what I wanted to do for a project I have in mind, right down to the label on my servos being the same as on yours. But the video is a fail, because it obscures and leaves out the important parts.
Undo the screws, cut the label it's open... kinda obvious.
OK, half a point for showing cutting off the "nub" on the gear.
But I absolutely *CANNOT* tell what you're doing with the screwdriver and pliers between 1:35 and 1:55. Removed something? Bent something out of the way? Removed or bent _what_ ? And why? It looks like the motor is sitting there untouched.
Then at 2:30, suddenly and magically and _OFF CAMERA_ two new wires get connected to what we are left to assume is probably two of the four wires that were cut earlier. But what those two new wires are connected to is never shown.
If you're going to do a "how to", then don't leave out steps, and fast-forward through other critical steps.

[@rosemondcardoso4919]

Can we control servo with 10k potentiometer

[@wildanfadhil877]

Apakah ini bisa digunakan pada rc quick Drive?

[@ushadevi3223]

Video is running so fast

[@sulemanhassanali]

I adjusted its speed to 0.75. TH-cam provides that option for every video.

[@RenatosilvaMinis-Games]

Muito top

[@priyanshmehta5668]

Which was name of wire you used last?
Can you tell me the link where I can buy in India?

[@aaditya9030]

Tats a jumber wire..u can search for it it's easily available

[@pipoypipoy7796]

what is the name of the song?

[@totape4161]

Can you give me the code for Arduino IDE for the servo rotate 360degrees?

[@anmol4484]

Um bruh the servo can only spin 180 degress as long as u have some modification like he did

[@hilmidwiputranto6944]

why would I do this if it just would be the same as a normal DC motor anyway

[@sharojalhasan7852]

o .. Now its high torque dc motor

[@pudsr2497]

Yes cool

[@melihapa3884]

Hızlandırılmış video olduğu için ne yapıldığı hiç anlaşılmıyor

[@KurumiZph]

Wait wait wait, what, you are not even connecting back those wires. Also what is the reason for cutting them?

[@MrExpert]

Normally servos can't rotate 360 degree and thrs wire for signal. for continuous rotation we need only 2 wires + and - .

[@MrMarkozcortez]

Hey bro you didn’t show how you connected the cables is not on min. 0.55

[@MrExpert]

Hello. Just connect the 2 wires to a DC motor as you would normally. Cheers

[@davidroberts1852]

Hack complete at 0:55

[@tayyc719]

thanks

[@fajarriyanto2140]

Amazing

[@bedok790]

Servo motor 360 and turn back

[@raikku2971]

For what purpose would anybody want to have continuous rotation servos?! I cannot comprehend it.

[@MrExpert]

to use as powerful mini geared motor.. i Have used a lot in my projects.

[@orange_tweleve]

just why not buy a gear motor ? they are so much cheaper yk

[@MrExpert]

Torque

[@germancarrasco2028]

Why? Simple motors are cheaper...

[@tylermontero7104]

G erman C arrasco some servos have more power

[@dwiwahyu2804]

This is a not input program

[@Angelrefers]

Bro i m using mobile charger

[@nksaini3045]

Bhi kisi ko ye chye

[@abpccpba]

Way to fast be more delibert.

[@scienceinnovativebrain]

very nice
#scienceinnovativebrain

[@nksaini3045]

Aap Humse hundred rupees mein le sakte hain

[@achumons5766]

Dead

[@thecrazerkid2146]

Ohhhhhhhh i get it thirs a chicken nugget stoping it from going 360

[@olimpioamaral3517]

fake fake fake fake ele e experto

[@rosemondcardoso4919]

Can we control servo with 10k potentiometer

[@Jobayer.AlHasan]

yes